Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
RNCF2010BTC3M00
Stackpole Electronics
RNCF2010BTC3M00 by Stackpole Electronics is a thin film fixed resistor with 3000000 ohm resistance, 0.1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 150 V.
Rectangular
e3
SURFACE MOUNT
2
155 Cel
-55 Cel
.55 mm
4.9 mm
RECTANGULAR PACKAGE
SMT
2.4 mm
TR, EMBOSSED PLASTIC, 7 INCH
.25 W
70 Cel
AEC-Q200
3000000 ohm
FIXED RESISTOR
2010
THIN FILM
50
Matte Tin (Sn) - with Nickel (Ni) barrier
WRAPAROUND
.1 %
150 V
RNCF2010BTC562R
RNCF2010BTC562R by Stackpole Electronics is a 562 ohm fixed resistor with 0.1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.33 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
.33 W
562 ohm
200 V
RNCF2010BTC7R15
RNCF2010BTC7R15 by Stackpole Electronics is a 7.15 ohm fixed resistor with thin film technology. It operates b/w -55 to 155 °C, with a tolerance of 0.1%. Suitable for surface mount applications, it has a rated power dissipation of 0.33 W and is AEC-Q200 compliant.
7.15 ohm
RNCF2010BTC8R66
RNCF2010BTC8R66 by Stackpole Electronics is a thin film fixed resistor with 8.66 ohm resistance, 0.1% tolerance, and 0.33 W power dissipation. Ideal for SMT applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 200 V.
8.66 ohm
RNCF2010BTE10R0
RNCF2010BTE10R0 by Stackpole Electronics is a 10 ohm SMT fixed resistor with 0.1% tolerance. With a rated power dissipation of 0.33W, it operates b/w -55 to 155 °C making it ideal for automotive applications meeting AEC-Q200 standard.
10 ohm
25
RNCF2010BTE130K
RNCF2010BTE130K by Stackpole Electronics is a thin film fixed resistor with a resistance of 130k ohm and a tolerance of 0.1%. It is commonly used in surface mount applications requiring a rated power dissipation of 0.33W.
130000 ohm
RNCF2010BTE3M00
RNCF2010BTE3M00 by Stackpole Electronics is a thin film fixed resistor with 3000000 ohm resistance, 0.1% tolerance, and 0.25 W power dissipation. It is used in surface mount applications for automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 150 V.
RNCF2010BTE7R32
RNCF2010BTE7R32 by Stackpole Electronics is a 7.32 ohm SMT fixed resistor with 0.1% tolerance and 0.33 W power dissipation. Ideal for automotive applications, it operates b/w -55 to 155 °C with a temperature coefficient of 25 ppm/°C.
7.32 ohm
RNCF2010BTE7R50
RNCF2010BTE7R50 by Stackpole Electronics is a thin film fixed resistor with 7.5 ohm resistance, 0.1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating temperature range of -55 to 155 °C.
7.5 ohm
RNCF2010BTE7R68
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 7.68 ohm; Rated Power Dissipation (P): .33 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %;
7.68 ohm
RNCF2010BTE8R66
RNCF2010BTE8R66 by Stackpole Electronics is a thin film fixed resistor with 8.66 ohm resistance, 0.1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
RNCF2010DKE130K
RNCF2010DKE130K by Stackpole Electronics is a thin film fixed resistor with a resistance of 130k ohm and a tolerance of 0.5%. It is commonly used in surface mount applications requiring a rated power dissipation of 0.33W.
TR, 7 INCH
.5 %
RNCF2010DKE8R66
RNCF2010DKE8R66 by Stackpole Electronics is a thin film fixed resistor with 8.66 ohm resistance, 0.5% tolerance, and 0.33 W power dissipation. It is designed for surface mount applications in automotive electronics, offering a temperature coefficient of 25 ppm/°C and operating voltage of 200 V.
RNCF2010DTC130K
RNCF2010DTC130K by Stackpole Electronics is a thin film fixed resistor with 130k ohm resistance, 0.5% tolerance, and 0.33W power dissipation. It is used in surface mount applications with operating temperatures ranging from -55 to 155 °C for automotive electronics meeting AEC-Q200 standards.
RNCF2010DTC7R32
RNCF2010DTC7R32 by Stackpole Electronics is a 7.32 ohm SMT fixed resistor with 0.5% tolerance, suitable for surface mount applications. With a temperature coefficient of 50 ppm/°C, it operates b/w -55 to 155 °C and has a power dissipation of 0.33 W. Ideal for automotive electronics due to AEC-Q200 compliance and rated voltage of 200 V.
RNCF2010DTC8R66
RNCF2010DTC8R66 by Stackpole Electronics is a 8.66 ohm SMT fixed resistor with 0.5% tolerance, rated for 70-155 °C. Ideal for AEC-Q200 applications, it features thin film technology in a rectangular package suitable for surface mounting.
RNCF2010DTE130K
RNCF2010DTE130K by Stackpole Electronics is a thin film fixed resistor with 130k ohm resistance, 0.5% tolerance, and 0.33W power dissipation. It is used in surface mount applications for automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 200V.
RNCF2010DTE8R25
RNCF2010DTE8R25 by Stackpole Electronics is a 8.25 ohm SMT fixed resistor with 0.5% tolerance, suitable for applications requiring a temperature coefficient of 25 ppm/°C. With a max operating temperature of 155 °C and AEC-Q200 reference standard, it is ideal for automotive electronics.
8.25 ohm
RNCF2010DTE8R66
RNCF2010DTE8R66 by Stackpole Electronics is a thin film fixed resistor with 8.66 ohm resistance, 0.5% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 200 V.
RNCF2512BTC10R0
RNCF2512BTC10R0 by Stackpole Electronics is a thin film fixed resistor with a resistance of 10 ohm and a tolerance of 0.1%. It is commonly used in surface mount applications and has a max operating temperature of 155 °C.
6.3 mm
3.1 mm
1 W
2512
RNCF2512BTC49R9
RNCF2512BTC49R9 by Stackpole Electronics is a 49.9 ohm SMT fixed resistor with 0.1% tolerance and 1W power dissipation. With a temperature coefficient of 50 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for automotive applications meeting AEC-Q200 standards.
49.9 ohm
RNCF2512BTC6R34
RNCF2512BTC6R34 by Stackpole Electronics is a thin film fixed resistor with 6.34 ohm resistance, 0.1% tolerance, and 1W power dissipation. It is used in automotive applications due to AEC-Q200 standard compliance and can operate b/w -55°C to 155°C with a max voltage of 200V.
6.34 ohm
RNCF2512BTC7R15
RNCF2512BTC7R15 by Stackpole Electronics is a 1W fixed resistor with 7.15 ohm resistance, 0.1% tolerance, and 155°C max operating temp. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and thin film technology.
RNCF2512BTC7R32
RNCF2512BTC7R32 by Stackpole Electronics is a 7.32 ohm fixed resistor with a thin film technology and tolerance of 0.1%. It operates b/w -55 to 155 °C, suitable for AEC-Q200 reference standard applications requiring a surface mount package style.
RNCF2512BTC7R68
RNCF2512BTC7R68 by Stackpole Electronics is a 7.68 ohm SMT fixed resistor with 0.1% tolerance and 1W power dissipation. Ideal for automotive applications due to AEC-Q200 compliance, it operates b/w -55°C to 155°C with a temperature coefficient of 50 ppm/°C.
RNCF2512BTC7R87
RNCF2512BTC7R87 by Stackpole Electronics is a 7.87 ohm SMT fixed resistor with 1W power dissipation, 0.1% tolerance, and 50ppm/°C temperature coefficient. Ideal for automotive applications due to AEC-Q200 compliance and operating voltage of 200V.
7.87 ohm
RNCF2512BTE10R0
RNCF2512BTE10R0 by Stackpole Electronics is a thin film fixed resistor with a resistance of 10 ohm and a tolerance of 0.1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
RNCF2512BTE3K48
RNCF2512BTE3K48 by Stackpole Electronics is a 3480 ohm fixed resistor with 0.1% tolerance. It operates b/w -55 to 155 °C and has a temperature coefficient of 25 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
.5 W
3480 ohm
RNCF2512BTE6R34
RNCF2512BTE6R34 by Stackpole Electronics is a thin film fixed resistor with 6.34 ohm resistance, 0.1% tolerance, and 1W power dissipation. It operates b/w -55 to 155 °C and is ideal for automotive applications due to AEC-Q200 standard compliance and 200V operating voltage.
RNCF2512BTE7R87
RNCF2512BTE7R87 by Stackpole Electronics is a 7.87 ohm fixed resistor with 1W power dissipation, 0.1% tolerance, and 25ppm/°C temperature coefficient. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating voltage of 200V.
RNCF2512BTE8R87
The Stackpole Electronics RNCF2512BTE8R87 is a thin film fixed resistor with 8.87 ohm resistance, 0.1% tolerance, and 1W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
8.87 ohm
RNCF2512DTC1R30
RNCF2512DTC1R30 by Stackpole Electronics is a 1.3 ohm fixed resistor with 0.5% tolerance, suitable for SMT mounting in various applications. With a temperature coefficient of 50 ppm/°C, it operates b/w -55 to 155 °C and can handle up to 200V voltage, meeting AEC-Q200 standards.
1.3 ohm
RNCF2512DTC6R34
RNCF2512DTC6R34 by Stackpole Electronics is a 1W fixed resistor with 6.34 ohm resistance, 0.5% tolerance, and thin film technology. Operating b/w -55 to 155 °C, it's ideal for automotive applications meeting AEC-Q200 standards in SMT packages.
RNCF2512DTC7R15
RNCF2512DTC7R15 by Stackpole Electronics is a 7.15 ohm fixed resistor with thin film technology. It operates b/w -55 to 155 °C, has a tolerance of 0.5%, and can handle up to 200V. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and high power dissipation of 1W.
RNCF2512DTC7R50
RNCF2512DTC7R50 by Stackpole Electronics is a 1W fixed resistor with 7.5 ohm resistance, rated for temperatures from -55 to 155°C. Its thin film technology and surface mount package make it ideal for automotive applications requiring high precision and reliability.
RNCF2512DTE1R30
RNCF2512DTE1R30 by Stackpole Electronics is a 1.3 ohm fixed resistor with 0.5% tolerance and 1W power dissipation. With a temperature coefficient of 25 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for automotive applications meeting AEC-Q200 standards. This thin film resistor in SMT package offers high reliability and precision in various electronic circuits.
RNCF2512DTE6R34
RNCF2512DTE6R34 by Stackpole Electronics is a 1W fixed resistor with 6.34 ohm resistance, 0.5% tolerance, and 25ppm/°C temperature coef. It operates b/w -55 to 155 °C, suitable for AEC-Q200 automotive applications requiring SMT mounting in a rectangular package.
RNCF2512DTE7R15
RNCF2512DTE7R15 by Stackpole Electronics is a 7.15 ohm SMT fixed resistor with 0.5% tolerance, rated for temperatures from -55 to 155 °C. Ideal for automotive applications due to AEC-Q200 compliance and high operating voltage of 200 V.
RNCF1206BKE160R
RNCF1206BKE160R by Stackpole Electronics is a 160 ohm fixed resistor with 0.1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.33 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
3.05 mm
1.55 mm
160 ohm
1206
RNCF1206BKE470K
The Stackpole Electronics RNCF1206BKE470K is a thin film fixed resistor with 470k ohm resistance, 0.1% tolerance, and 0.33W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 certification.
470000 ohm
RNCF1206BTC2M20
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %;
TR, PAPER, 7 INCH
.125 W
2200000 ohm
RNCF1206BTC470K
RNCF1206BTC470K by Stackpole Electronics is a 470k ohm fixed resistor with 0.1% tolerance, suitable for surface mount technology. With a thin film technology and operating voltage of 200V, it is ideal for applications requiring precise resistance values in compact spaces. Operating temperature range from -55 to 155 °C makes it versatile for various electronic devices.
RNCF1206BTE470K
RNCF1206BTE470K by Stackpole Electronics is a fixed resistor with 470k ohm resistance, 0.1% tolerance, and 0.33W power dissipation. It is a thin film technology SMT resistor suitable for automotive applications meeting AEC-Q200 standard. Operating temperature range from -55 to 155 °C makes it ideal for various electronic circuits.
RNCF2010DKE510K
RNCF2010DKE510K by Stackpole Electronics is a SMT fixed resistor with 510k ohm resistance, 0.5% tolerance, and 0.33W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and operating voltage of 200V. Temperature coefficient of 25 ppm/°C ensures stable performance in -55 to 155 °C range.
510000 ohm
RNCF2010DTC160R
RNCF2010DTC160R by Stackpole Electronics is a SMT fixed resistor with 160 ohm resistance, 0.5% tolerance, and 0.33 W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and operating voltage of 200 V. Temperature coefficient of 50 ppm/°C ensures stable performance in -55 to 155 °C range.
RNCF2010DTE510K
RNCF2010DTE510K by Stackpole Electronics is a thin film fixed resistor with 510k ohm resistance, 0.5% tolerance, and 0.33W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155°C.
RNCF2010DTE8R20
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 8.2 ohm; Rated Power Dissipation (P): .33 W; Maximum Operating Temperature: 155 Cel; Tolerance: .5 %;
8.2 ohm
RNCF2512BKE10R0
RNCF2512BKE10R0 by Stackpole Electronics is a 10 ohm fixed resistor with 0.1% tolerance and 1W power dissipation. With thin film technology, it operates b/w -55 to 155 °C, making it ideal for automotive applications meeting AEC-Q200 standards. Its SMT package style and wraparound terminals ensure reliable surface mounting in various electronic circuits.
© 2023 All rights reserved
