Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
RMCF2010FT8R66
Stackpole Electronics
RMCF2010FT8R66 by Stackpole Electronics is a fixed resistor with 8.66 ohm resistance, 1% tolerance, and 0.75 W power dissipation. It is used in surface mount technology applications due to its rectangular shape and metal glaze/thick film technology. With a temperature coefficient of 400 ppm/°C, it operates b/w -55 °C to 155 °C for various electronic devices.
Rectangular
e3
SURFACE MOUNT
2
155 Cel
-55 Cel
.55 mm
5 mm
RECTANGULAR PACKAGE
SMT
2.5 mm
TR, PLASTIC, 7 INCH
.75 W
70 Cel
AEC-Q200
8.66 ohm
FIXED RESISTOR
2010
METAL GLAZE/THICK FILM
400
MATTE TIN OVER NICKEL
WRAPAROUND
1 %
200 V
RMCF2010JT2R70
RMCF2010JT2R70 by Stackpole Electronics is a fixed resistor with 2.7 ohm resistance, 5% tolerance, and 0.75 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 400 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2.7 ohm
5 %
RMCF2512FT12K4
RMCF2512FT12K4 by Stackpole Electronics is a fixed resistor with a resistance of 12400 ohm and a tolerance of 1%. It is used in applications requiring a rated power dissipation of 1 W and an operating voltage of 200 V.
6.3 mm
3.2 mm
1 W
12400 ohm
2512
100
RMCF2512FT14R7
RMCF2512FT14R7 by Stackpole Electronics is a 1W fixed resistor with 14.7 ohm resistance, 1% tolerance, and operating voltage of 200V. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 155 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
14.7 ohm
RMCF2512FT1R30
RMCF2512FT1R30 by Stackpole Electronics is a 1.3 ohm fixed resistor with a 1% tolerance and 1W power dissipation. It operates b/w -55°C to 155°C, making it suitable for automotive applications due to its AEC-Q200 reference standard compliance and 200V operating voltage capacity in a surface mount package style.
1.3 ohm
RMCF2512FT1R37
RMCF2512FT1R37 by Stackpole Electronics is a 1.37 ohm fixed resistor with 1% tolerance and 1W power dissipation. It operates b/w -55 to 155 °C, suitable for AEC-Q200 reference standard applications in automotive electronics due to its metal glaze/thick film technology and surface mount package style.
1.37 ohm
RMCF2512FT232R
RMCF2512FT232R by Stackpole Electronics is a 232 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 1W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
232 ohm
RMCF2512FT23R7
RMCF2512FT23R7 by Stackpole Electronics is a 23.7 ohm fixed resistor with 1% tolerance and 1W power dissipation. It operates b/w -55 to 155 °C, making it suitable for automotive applications meeting AEC-Q200 standard. With SMT package style and matte tin finish, it is ideal for surface mounting in various electronic circuits.
23.7 ohm
RMCF2512FT374R
RMCF2512FT374R by Stackpole Electronics is a fixed resistor with 374 ohm resistance, 1% tolerance, and 1W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
374 ohm
RMCF2512FT3K48
RMCF2512FT3K48 by Stackpole Electronics is a fixed resistor with 3480 ohm resistance, 1% tolerance, and 1W power dissipation. It is ideal for surface mount applications in various electronic devices due to its operating voltage of 200V and temperature coefficient of 100 ppm/°C. With a rated temperature range from -55 to 155 °C, it meets AEC-Q200 standards for automotive use.
3480 ohm
RMCF2512FT7R15
RMCF2512FT7R15 by Stackpole Electronics is a 1W fixed resistor with 7.15 ohm resistance, 1% tolerance, and 400 ppm/°C temperature coefficient. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 200V.
7.15 ohm
RMCF2512JT1M00
RMCF2512JT1M00 by Stackpole Electronics is a 1W fixed resistor with 1000000 ohm resistance, 5% tolerance, and 200V operating voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and wide temperature range (-55 to 155 °C).
1000000 ohm
200
RMCF2512JT1R30
RMCF2512JT1R30 by Stackpole Electronics is a 1.3 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. It operates b/w -55 to 155 °C and has a power dissipation of 1W. Ideal for automotive electronics due to AEC-Q200 reference standard compliance.
RMCF01005JT620R
RMCF01005JT620R by Stackpole Electronics is a fixed resistor with 620 ohm resistance, METAL GLAZE/THICK FILM technology, and 70-125 °C operating temperature range. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and 15V operating voltage capacity.
125 Cel
.13 mm
.4 mm
.2 mm
TR, PAPER, 7 INCH
.03 W
620 ohm
01005
15 V
HVCB1206FTD70M0
HVCB1206FTD70M0 by Stackpole Electronics is a fixed resistor with 70M ohm resistance, 1% tolerance, and 1500V operating voltage. It features metal glaze/thick film technology and is suitable for applications requiring high resistance values in surface mount configurations at temperatures ranging from -55°C to 150°C.
150 Cel
.33 W
70000000 ohm
1206
1500 V
MR3FK10L0
MR3FK10L0 by Stackpole Electronics is a METAL STRIP fixed resistor with 0.01 ohm resistance, 1% tolerance, and 3W power dissipation. Its tubular package and matte tin finish make it ideal for through-hole mounting applications in various electronic circuits. Operating temperature ranges from -55°C to 275°C.
THROUGH HOLE MOUNT
275 Cel
5.21 mm
14.22 mm
TUBULAR PACKAGE
AXIAL
TR
3 W
.01 ohm
METAL STRIP
MATTE TIN
WIRE
RNCF0805BTE25K9
RNCF0805BTE25K9 by Stackpole Electronics is a fixed resistor with 25900 ohm resistance, 0.1% tolerance, and 25 ppm/°C temperature coefficient. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and thin film technology ensuring high precision at temperatures ranging from -55 to 155 °C.
PRECISION
2 mm
1.25 mm
.25 W
25900 ohm
0805
THIN FILM
25
Matte Tin (Sn) - with Nickel (Ni) barrier
.1 %
100 V
RNCF1206BKY250R
RNCF1206BKY250R by Stackpole Electronics is a 250 ohm SMT fixed resistor with 0.1% tolerance. With a rated power dissipation of 0.25W, it operates b/w -55 to 155 °C making it ideal for automotive applications meeting AEC-Q200 standards.
3.05 mm
1.55 mm
250 ohm
5
150 V
RNCF1206DKT50R0
RNCF1206DKT50R0 by Stackpole Electronics is a 50 ohm fixed resistor with thin film technology. Operating temperature ranges from -55 to 155 °C, with a tolerance of 0.5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 150V operating voltage.
50 ohm
10
.5 %
RNV14FTL910K
RNV14FTL910K by Stackpole Electronics is a METAL FILM fixed resistor with 910k ohm resistance, 1% tolerance, and 0.25W power dissipation. It operates b/w -55 to 155 °C and has a max voltage of 1600V. Ideal for applications requiring precise resistance values in through-hole mounting setups.
RATED AC VOLTAGE (V): 1150
2.4 mm
6 mm
910000 ohm
METAL FILM
1600 V
CSR0402FT50L0
CSR0402FT50L0 by Stackpole Electronics is a fixed resistor with 1% tolerance, 0.05 ohm resistance, and 0.125 W power dissipation. It is ideal for surface mount applications in electronics requiring a temperature coefficient of 200 ppm/°C and operating temperatures ranging from -55 to 155 °C.
.32 mm
1 mm
.5 mm
.125 W
.05 ohm
0402
CSR0402FTR500
CSR0402FTR500 by Stackpole Electronics is a fixed resistor with a resistance of 0.5 ohm and 1% tolerance. It operates b/w -55°C to 155°C, making it suitable for various applications requiring precise resistance values in surface mount technology. The resistor's metal glaze/thick film technology ensures stable performance in demanding environments.
.5 ohm
CSR0402JTR500
The Stackpole Electronics CSR0402JTR500 is a fixed resistor with a resistance of 0.5 ohm and a tolerance of 5%. It features a max operating temperature of 155°C, making it suitable for various surface mount applications requiring precise resistance values in electronic circuits. The resistor utilizes metal glaze/thick film technology and has a rated power dissipation of 0.125 W, ensuring reliable performance in temperature-sensitive environments.
CSR0805FT70L0
CSR0805FT70L0 by Stackpole Electronics is a fixed resistor with 1% tolerance, rated at 0.25W power dissipation and resistance of 0.07 ohm. It operates b/w -55°C to 155°C, making it suitable for various applications requiring precise resistance values in surface mount technology.
.07 ohm
CSR0805FTR250
CSR0805FTR250 by Stackpole Electronics is a fixed resistor with a resistance of 0.25 ohm and a tolerance of 1%. It has a max operating temperature of 155 °C and is suitable for surface mount applications.
.25 ohm
CSR0805JKR250
CSR0805JKR250 by Stackpole Electronics is a fixed resistor with a resistance of 0.25 ohm and a tolerance of 5%. It operates b/w -55 to 155 °C, making it suitable for various applications requiring precise resistance values in surface mount technology. The metal glaze/thick film technology ensures stable performance in demanding environments.
CSR0805JTR250
Stackpole Electronics' CSR0805JTR250 is a fixed resistor with 0.25 ohm resistance, 5% tolerance, and 0.25 W power dissipation. It operates b/w -55°C to 155°C, ideal for surface mount applications requiring a metal glaze/thick film technology in rectangular packages.
CSR1206FK24L0
Stackpole Electronics' CSR1206FK24L0 is a 1206 fixed resistor with 0.024 ohm resistance, 1% tolerance, and 0.5 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
.5 W
.024 ohm
CSR1206FKR270
CSR1206FKR270 by Stackpole Electronics is a fixed resistor with a resistance of 0.27 ohm and 1% tolerance. It operates b/w -55°C to 155°C, making it suitable for various applications requiring precise resistance values in surface mount technology. With a rated power dissipation of 0.5 W, this metal glaze/thick film resistor is ideal for compact electronic devices.
.27 ohm
CSR1206FTR250
CSR1206FTR250 by Stackpole Electronics is a 1206 size fixed resistor with a resistance of 0.25 ohm and 1% tolerance. It operates b/w -55°C to 155°C, making it suitable for various applications requiring precise resistance values in compact SMT packages. The metal glaze/thick film technology ensures stable performance in demanding environments.
CSR1225FTR500
CSR1225FTR500 by Stackpole Electronics is a fixed resistor with 0.5 ohm resistance, 1% tolerance, and 3W power dissipation. It operates b/w -55°C to 155°C with a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in various electronic circuits requiring precise resistance values.
1225
CSRF0603FT5L00-HP
Stackpole Electronics' CSRF0603FT5L00-HP is a fixed resistor with 1% tolerance, 0.005 ohm resistance, and 0.5 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and temperature coefficient of 150 ppm/°C.
170 Cel
1.6 mm
.8 mm
100 Cel
.005 ohm
0603
METAL FOIL
150
CSRF1206FT30L0
Stackpole Electronics' CSRF1206FT30L0 is a 1W fixed resistor with 0.03 ohm resistance and 1% tolerance. With a temperature coefficient of 50 ppm/°C, it operates b/w -55 to 170 °C making it ideal for automotive applications meeting AEC-Q200 standards. This chip resistor features metal foil technology in a compact SMT package suitable for various electronic circuits.
Chip
3.1 mm
.03 ohm
50
CSRN2010FTR120
CSRN2010FTR120 by Stackpole Electronics is a 1% tolerance fixed resistor with resistance of 0.12 ohm. It operates b/w -55 to 155 °C and has temperature coef of 250 ppm/°C. Ideal for surface mount applications in various electronic circuits.
.12 ohm
250
CSRN2512FTR600
CSRN2512FTR600 by Stackpole Electronics is a METAL GLAZE/THICK FILM fixed resistor with 0.6 ohm resistance, 1% tolerance, and 2W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and temperature range of -55°C to 155°C.
2 W
.6 ohm
CSS2728FT12L0
CSS2728FT12L0 by Stackpole Electronics is a fixed resistor with 1% tolerance, 0.012 ohm resistance, and 3W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and temperature range of -55 to 225°C. Surface mount technology in rectangular package makes it versatile for various electronic designs.
ULTRA PRECISION
225 Cel
.012 ohm
2728
METAL ALLOY
15
CSS2728FT22L0
CSS2728FT22L0 by Stackpole Electronics is a fixed resistor with 0.022 ohm resistance, 1% tolerance, and 3W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and temperature range of -55 to 225°C. Surface mount technology with matte tin over nickel terminal finish ensures reliable performance in harsh environments.
.022 ohm
CSS2728FT24L0
CSS2728FT24L0 by Stackpole Electronics is a 3W fixed resistor with 0.024 ohm resistance, 1% tolerance, and 15 ppm/°C temperature coef. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and -55 to 225 °C operating range.
CSS2728FT70L0
CSS2728FT70L0 by Stackpole Electronics is a fixed resistor with 0.07 ohm resistance, 1% tolerance, and 3W power dissipation. It is ideal for surface mount applications in automotive electronics due to its high operating temperature range of -55°C to 225°C and AEC-Q200 compliance.
CSSH2728FT24L0
CSSH2728FT24L0 by Stackpole Electronics is a 4W fixed resistor with 0.024 ohm resistance, 1% tolerance, and 15 ppm/°C temperature coefficient. Ideal for automotive applications due to AEC-Q200 compliance and -55 to 225 °C operating range.
4 W
KAL10FB500R
KAL10FB500R by Stackpole Electronics is a wire wound fixed resistor with a resistance of 500 ohm and a tolerance of 1%. It is designed for chassis mount applications and can handle a max operating temperature of 275 °C.
CHASSIS MOUNT
BULK
12.5 W
25 Cel
500 ohm
WIRE WOUND
20
LUG
KAL50FB25R0
KAL50FB25R0 by Stackpole Electronics is a 25 ohm fixed wire wound resistor with 1% tolerance and 50W power dissipation. It has a max operating temperature of 275°C, making it suitable for chassis mount applications requiring high power handling and precise resistance values. The rectangular package with lug terminals ensures easy installation in bulk packaging.
50 W
25 ohm
30
KAL50JB4R00
KAL50JB4R00 by Stackpole Electronics is a 50W fixed resistor with 4 ohm resistance, 5% tolerance, and wire wound technology. Ideal for chassis mounting applications, it has a max operating temperature of 275°C and temperature coefficient of 50 ppm/°C.
4 ohm
SM8035FT250R
SM8035FT250R by Stackpole Electronics is a wire wound fixed resistor with a resistance of 250 ohm and a tolerance of 1%. It has a rated power dissipation of 4W and can operate at temperatures ranging from -55 to 275 °C. This surface mount resistor is commonly used in electronic circuits for precise current control.
9.4 mm
20.32 mm
8.89 mm
8035
31.62 V
SM8035FT50R0
SM8035FT50R0 by Stackpole Electronics is a 50 ohm fixed resistor with 1% tolerance, rated for temperatures from -55 to 275 °C. Its wire wound technology and surface mount package make it ideal for high-power applications requiring precise resistance values in compact spaces.
14.14 V
WW3FT22R0
WW3FT22R0 by Stackpole Electronics is a 22 ohm wire wound fixed resistor with 1% tolerance and 3W power dissipation. Operating voltage of 8.12V, rated for temperatures from -55 to 350 °C. Ideal for through hole mounting in applications requiring precise resistance values and high power handling capabilities.
350 Cel
22 ohm
Matte Tin (Sn)
8.12 V
WW3FTR220
WW3FTR220 by Stackpole Electronics is a fixed resistor with a resistance of 0.22 ohm and rated power dissipation of 3W. It operates b/w -55 to 350 °C, with a temperature coefficient of 90 ppm/°C. Ideal for applications requiring precise resistance values in high-temperature environments.
.22 ohm
90
.81 V
WW3JB22R0
WW3JB22R0 by Stackpole Electronics is a 22 ohm fixed resistor with wire wound technology. It has a rated power dissipation of 3.2W and operates b/w -55°C to 350°C, making it suitable for high-temperature applications. With a tolerance of 5%, this axial package style resistor is ideal for through-hole mounting in various electronic circuits.
Tubular
.81 mm
38.1 mm
4.75 mm
Axial
3.2 W
8.3905 V
© 2023 All rights reserved
