Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
G5LE-1A4-ASI-DC5
Omron
Omron's G5LE-1A4-ASI-DC5 is a SPST power/signal relay with 10A@250VAC AC contact rating and 8A@30VDC DC contact rating. It operates at -25 to 85°C, with 10.6ms operate time and 12.2ms release time. Ideal for applications requiring momentary relay action in industrial settings.
Power/Signal Relay
SPST
Momentary
DC
AC/DC
10 A
250 V
8 A
10A@250VAC
30 V
8A@30VDC
400 mW
63 Ω
5 V
79 mA
3.75 V
500 mV
0.748 in (19 mm)
0.886 in (22.5 mm)
16.5 in (419.1 mm)
0.886 x 0.65 x 0.748 in (22.5 x 16.5 x 19 mm)
Through Hole-Straight Mount
Tray
10.6 ms
12.2 ms
-25 °C (-13 °F)
85 °C (185 °F)
Solder
CSA; UL; VDE
36000 Cycle(s)
G5LE-1A4-ASI-DC6
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL;
125 V
8A@125VDC
90 Ω
6 V
66 mA
4.5 V
600 mV
-40 °C (-40 °F)
CSA; TUV; UL
100000 Cycle(s)
G5LE-1A4-DC3
22.5 Ω
3 V
136 mA
2.25 V
300 mV
G5LE-1A4-DC48
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE;
5.76 kΩ
48 V
8 mA
36 V
4.8 V
G5LE-1A4-DC6
PD10AB57
TE Connectivity
TE Connectivity's PD10AB57 is a SPST-NO power/signal relay with 1 FORM A configuration and MOMENTARY action. It has a max AC contact current of 10A, DC contact voltage of 1800V, and coil resistance of 290 ohm. Ideal for applications requiring AC/DC supply type, such as industrial automation systems.
SPST-NO
1 Form A
1.8 KV
290 Ω
24 V
Screw
4-1617072-3
TE Connectivity 4-1617072-3 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65 to 125 °C, handling up to 2A AC/DC current at 28V. Ideal for applications requiring reliable switching in harsh environments.
DPDT-CO
2 Form C
2 A
28 V
642 mW
56 Ω
-65 °C (-85 °F)
125 °C (257 °F)
Solder/Quick Connect
Hermetically Sealed
4-1617073-1
TE Connectivity 4-1617073-1 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65°C to 125°C, handling up to 2A AC/DC current at 28V. Ideal for applications requiring reliable switching in harsh environments.
520 mW
1.35 kΩ
26.5 V
RM207615
TE Connectivity's RM207615 is a DPDT relay with 2 FORM C, operate time of 18ms, and electrical life of 30k cycles. Ideal for AC/DC applications, it has a max AC contact current of 16A@440VAC and coil resistance of 2000Ω. With dimensions of 38.5mm x 35.5mm x 55.5mm, this power/signal relay is suitable for various industrial uses.
DPDT
AC
16 A
440 V
16A@440VAC
6000VA@440VAC
2.37 W
2 kΩ
21 mA
115 V
2.185 in (55.5 mm)
1.516 in (38.5 mm)
35.5 in (901.7 mm)
1.516 x 1.398 x 2.185 in (38.5 x 35.5 x 55.5 mm)
81 g
8
Bulk
18 ms
13 ms
-45 °C (-49 °F)
55 °C (131 °F)
2.5 kVrms
1.5 kVrms
Silver Cadmium Oxide
UL; VDE
RT1
30000 Cycle(s)
Coil Operate Voltage (AC): 92 V, Coil Release Voltage (AC): 46 V
T90S1D12-24
TE Connectivity's T90S1D12-24 is a SPST power/signal relay with 15ms operate/release time. It has 30A AC contact current, 24V DC coil voltage, and 660 ohm coil resistance. Ideal for applications requiring momentary relay action in temperatures ranging from -55°C to 85°C.
30 A
900 mW
660 Ω
36 mA
0.665 in (16.9 mm)
1.201 in (30.5 mm)
24.1 in (612.14 mm)
1.201 x 0.949 x 0.665 in (30.5 x 24.1 x 16.9 mm)
15 ms
-55 °C (-67 °F)
CSA; UL
G6D-1A-DC24
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; SEV; TUV; UL;
5 A
5A@250VAC
5A@30VDC
200 mW
2.88 kΩ
16.8 V
2.4 V
0.492 in (12.5 mm)
0.689 in (17.5 mm)
6.5 in (165.1 mm)
0.689 x 0.256 x 0.492 in (17.5 x 6.5 x 12.5 mm)
10 ms
70 °C (158 °F)
CSA; SEV; TUV; UL
300000 Cycle(s)
G6D
G81C345
Gigavac
G81C345 by Gigavac is a SPDT power/signal relay with 10ms operate/release time, 1A@28VDC contact rating. It has 16V DC coil operate voltage, 26.5V max DC coil voltage, and solder termination type. Ideal for applications requiring momentary relay action in industrial control systems.
SPDT
1 A
1A@28VDC
2.4115 W
91 mA
16 V
1 V
0.728 in (18.5 mm)
2.5 in (63.5 mm)
19.8 in (502.92 mm)
2.5 x 0.78 x 0.728 in (63.5 x 19.8 x 18.5 mm)
G81C
Panel Mountable
G81C235
Gigavac G81C235 is a SPDT power/signal relay with 10ms operate/release time, 1A@28VDC contact rating. It has 8V DC coil operate voltage, 12V max DC coil voltage, and 70 ohm coil resistance. Ideal for applications requiring momentary relay action in temperatures ranging from -55°C to 85°C.
2.052 W
70 Ω
12 V
171 mA
8 V
G5RL-K1A-EDC12
Omron G5RL-K1A-EDC12 is a 1 FORM A SPST power/signal relay with 10ms operate time, 50000 cycles electrical life, and 16A@250VAC max contact AC rating. It is ideal for applications requiring latched relay action, such as in industrial control systems or automotive electronics.
Latched
Random
16A@250VAC
16A@24VDC
100 mΩ
750 mW
192 Ω
63 mA
8.4 V
0.618 in (15.7 mm)
1.142 in (29 mm)
12.7 in (322.58 mm)
1.142 x 0.5 x 0.618 in (29 x 12.7 x 15.7 mm)
10 g
7
0.1378 in (3.5 mm)
6 kVrms
1 kVrms
1 GΩ
Silver Alloy
50000 Cycle(s)
HMB1131K01M
TE Connectivity's HMB1131K01M is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed for reliability, it operates b/w -65°C to 125°C. With a coil resistance of 700 ohm and max AC contact current of 2A, it is ideal for AC/DC applications in various industries.
1.003 W
700 Ω
38 mA
V23061B1002A601
TE Connectivity's V23061B1002A601 is a SPDT power/signal relay with 10x15mm dimensions. It operates at 3.5V, has a coil resistance of 118Ω, and supports up to 8A AC contact current. Ideal for applications requiring momentary relay action in both AC/DC supply environments.
220 mW
118 Ω
44 mA
3.5 V
0.591 in (15 mm)
1.181 in (30 mm)
10 in (254 mm)
1.181 x 0.394 x 0.591 in (30 x 10 x 15 mm)
V23061B1002A401
TE Connectivity V23061B1002A401 is a SPDT 1 FORM C relay with 6ms operate time. With 5 terminals, it has a max AC contact current of 8A@400VAC. Ideal for power and signal applications requiring momentary relay action.
1 Form C
400 V
8A@400VAC
2000VA@400VAC
11 g
5
0.1496 in (3.8 mm)
6 ms
2.5 ms
4 kVrms
ALFG1PF12
Panasonic
ALFG1PF12 by Panasonic is a SPST power/signal relay with 20ms operate time and 30,000 cycles electrical life. It has a max AC contact current of 22A@250VAC, making it suitable for applications requiring momentary relay action in AC circuits. With dimensions of 30.1mm x 15.7mm x 23.3mm and solder termination type, it is ideal for through-hole-straight mounting in various electronic devices.
22 A
22A@250VAC
1.4 W
103 Ω
117 mA
1.2 V
0.917 in (23.3 mm)
1.185 in (30.1 mm)
15.7 in (398.78 mm)
1.185 x 0.618 x 0.917 in (30.1 x 15.7 x 23.3 mm)
Box
20 ms
60 °C (140 °F)
NC4D-JP-DC12V
Panasonic's NC4D-JP-DC12V is a 4PDT power/signal relay with 20ms operate time and 100000 cycle electrical life. It has a max AC contact current of 4A@250VAC, making it suitable for applications requiring momentary relay action in temperatures ranging from -40 to 55°C.
4PDT
4 A
4A@250VAC
720 mW
200 Ω
60 mA
9.6 V
0.429 in (10.9 mm)
1.5 in (38.1 mm)
25.4 in (645.16 mm)
1.5 x 1 x 0.429 in (38.1 x 25.4 x 10.9 mm)
NC4D-JP-DC24V
Panasonic's NC4D-JP-DC24V is a 4PDT power/signal relay with 20ms operate time and 100000 cycles electrical life. With a max AC contact current of 4A@250VAC, it is ideal for applications requiring momentary relay action in temperatures ranging from -40°C to 55°C.
800 Ω
30 mA
19.2 V
NC4D-P-DC12V
Panasonic's NC4D-P-DC12V is a 4PDT power/signal relay with 20ms operate time and 100000 cycles electrical life. It has a max AC contact current of 4A@250VAC, making it suitable for applications requiring momentary relay action in temperatures ranging from -40°C to 55°C.
1.094 in (27.8 mm)
11.2 in (284.48 mm)
1.5 x 0.441 x 1.094 in (38.1 x 11.2 x 27.8 mm)
JS1AF-B-24V-F
Panasonic's JS1AF-B-24V-F is a SPST power/signal relay with 10A@250VAC contact rating. It operates at 16.8V DC coil voltage and has 50000 cycles electrical life. Ideal for applications requiring momentary relay action in temperatures ranging from -40°C to 85°C.
100 V
5A@100VDC
360 mW
1.6 kΩ
15 mA
0.646 in (16.4 mm)
0.866 in (22 mm)
16 in (406.4 mm)
0.866 x 0.63 x 0.646 in (22 x 16 x 16.4 mm)
CSA; TUV; UL; VDE
FCA-325-3201L
TE Connectivity's FCA-325-3201L is a 3PDT power/signal relay with momentary action. It has a max AC contact current of 25A and DC contact current of 25A, suitable for AC/DC applications. With solder termination and through-hole mounting, it is ideal for various power and signal relay needs.
3PDT
25 A
Tin/Lead
e0
FCA
FCB-205-0219M
TE Connectivity's FCB-205-0219M is a DPDT-CO relay with 2 FORM C, operate time of 5ms, and max contact AC rating of 3A@115VAC. Hermetically sealed for reliability, it's ideal for power applications requiring momentary relay action. With dimensions of 20.57mm x 10.41mm x 16.26mm and weight of 15.4g, it suits PCBs needing through-hole mounting with solder/quick connect terminals.
5A@115VAC
5A@28VDC
3A@115VAC
50 mΩ
500 Ω
18 V
1.5 V
0.64 in (16.26 mm)
0.81 in (20.57 mm)
10.41 in (264.414 mm)
0.81 x 0.41 x 0.64 in (20.57 x 10.41 x 16.26 mm)
15.4 g
0.1693 in (4.3 mm)
5 ms
-70 °C (-94 °F)
100 MΩ
FCA-210-0919M
TE Connectivity's FCA-210-0919M is a DPDT-CO power/signal relay with 2 FORM C configuration. It operates at 10ms, with max AC rating of 4A@115VAC and insulation resistance of 100MΩ. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -70°C to 125°C.
10A@115VAC
10A@28VDC
8A@115VAC
4A@115VAC
10 mΩ
320 Ω
1.01 in (25.65 mm)
1.025 in (26.03 mm)
13.33 in (338.582 mm)
1.025 x 0.525 x 1.01 in (26.03 x 13.33 x 25.65 mm)
45.4 g
0.2677 in (6.8 mm)
1.25 kVrms
Gold
FCB-205-0119M
TE Connectivity's FCB-205-0119M is a DPDT-CO power/signal relay with 2 FORM C. It operates at 5ms, has a max contact rating of 3A@115VAC, and is hermetically sealed. Ideal for AC/DC applications requiring momentary relay action in harsh environments.
FCA-210-1019M
TE Connectivity's FCA-210-1019M is a DPDT-CO relay with 2 FORM C configuration. It operates at 10ms, has a max AC rating of 4A@115VAC, and is hermetically sealed. Ideal for power applications requiring momentary relay action, it features gold-plated terminals and silver cadmium oxide contacts.
V23061B1005A401
TE Connectivity's V23061B1005A401 is a SPDT power/signal relay with 8A AC contact current and 652 ohm coil resistance. Operating at 8.4V, it has a max DC coil current of 0.018A and requires 220mW coil power. Ideal for applications requiring momentary relay action in AC/DC circuits with through-hole mounting.
652 Ω
18 mA
JQ1A-24V-F
Panasonic's JQ1A-24V-F is a SPST power/signal relay with 20ms operate time and 50000 cycles electrical life. It has a max DC coil voltage of 24V, making it suitable for applications requiring momentary relay action in AC/DC circuits up to 110VDC or 250VAC at 5A.
110 V
5A@110VDC
0.63 in (16 mm)
0.787 in (20 mm)
0.787 x 0.394 x 0.63 in (20 x 10 x 16 mm)
CSA; SEMKO; TUV; UL; VDE
JQ1P-24V-F
Panasonic JQ1P-24V-F is a SPDT power/signal relay with 20ms operate time and 100000 cycles electrical life. It has a max DC coil voltage of 24V, making it suitable for applications requiring momentary relay action in AC/DC contact or output supply types.
3 A
3A@250VAC
3A@110VDC
1.44 kΩ
17 mA
JQ1P-5V-F
Panasonic JQ1P-5V-F is a SPDT power/signal relay with 20ms operate time and 100000 cycles electrical life. It has a max AC contact current of 3A@250VAC, making it suitable for applications requiring momentary relay action in industrial equipment and control systems.
62.5 Ω
80 mA
4 V
250 mV
JQ
G6E-134P-ST-US-DC48
Omron G6E-134P-ST-US-DC48 is a SPDT power/signal relay with 8ms operate/release time, 3A@250VAC max contact AC rating. Ideal for applications requiring momentary relay action, it operates at -40 to 70°C temperature range and has a coil resistance of 5760 ohm.
220 V
3A@220VDC
33.6 V
0.33 in (8.38 mm)
9.91 in (251.714 mm)
0.63 x 0.39 x 0.33 in (16 x 9.91 x 8.38 mm)
8 ms
G6E-134P-ST-US-DC6
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
180 Ω
33 mA
4.2 V
G6E-134PL-ST-US-DC3
133 mA
2.1 V
G6E-134PL-ST-US-DC9
203 Ω
9 V
6.3 V
900 mV
G6EK-134P-ST-US-DC24
Omron G6EK-134P-ST-US-DC24 is a SPDT latched power/signal relay with 8ms operate/release time, 16.8V DC coil voltage, and 3A@250VAC contact rating. Ideal for AC/DC applications in industries requiring reliable switching at temperatures ranging from -40°C to 70°C.
G6EK-134P-ST-US-DC3
Omron G6EK-134P-ST-US-DC3 is a latched SPDT power/signal relay with 8ms operate/release time, 3A max AC/DC contact current, and 70°C max operating temp. Ideal for applications requiring reliable switching in industrial control systems or automation equipment due to its compact size and high performance capabilities.
45 Ω
67 mA
G6EK-134P-ST-US-DC6
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: LATCHED; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
G6EK-134PL-ST-US-DC12
360 Ω
G6EK-134PL-ST-US-DC24
50VA@250VAC
60W@220VDC
1.5A@250VAC
2.7 g
Silver
G6EK-134PL-ST-US-DC3
G6EK-134PL-ST-US-DC5
G6EK-134PL-ST-US-DC6
G6EU-134P-ST-US-DC12
720 Ω
G6EU-134P-ST-US-DC24
G6EU-134P-ST-US-DC3
G6EU-134P-ST-US-DC5
125 Ω
40 mA
G6EU-134P-ST-US-DC6
© 2023 All rights reserved
