Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NF4EB-12V
Panasonic
NF4EB-12V by Panasonic is a 4PDT power/signal relay with 16.5ms operate time and 200000 cycle electrical life. With a max contact DC power rating of 60W@220VDC, it's ideal for AC/DC supply applications requiring reliable switching control in temperatures ranging from -40 to 65°C.
Power/Signal Relay
4PDT
MBB
4 Form C
Random
DC
AC/DC
2 A
220 V
2A@220VAC
2A@220VDC
100VA@220VAC
60W@220VDC
50 mΩ
440 mW
330 Ω
17 V
37 mA
9.6 V
1.2 V
12 V
0.437 in (11.1 mm)
1.189 in (30.2 mm)
20 in (508 mm)
1.189 x 0.787 x 0.437 in (30.2 x 20 x 11.1 mm)
15.5 g
Through Hole-Straight Mount
15
0.13 in (3.302 mm)
Box
16.5 ms
11.5 ms
-40 °C (-40 °F)
65 °C (149 °F)
1 kVrms
750 Vrms
1 GΩ
Silver
Gold
Solder
200000 Cycle(s)
4-1393122-4
TE Connectivity
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
Momentary
2.5 A
240 V
850 mW
650 Ω
24 V
38 mA
1.28 in (32.5 mm)
1.11 in (28.2 mm)
21.8 in (553.72 mm)
1.11 x 0.858 x 1.374 in (28.2 x 21.8 x 34.9 mm)
45 g
Panel Mount
Tray
50 °C (122 °F)
70 °C (158 °F)
1.5 kVrms
100 MΩ
Solder/Quick Connect
CSA; UL
Dust Proof
8-1393116-5
TE Connectivity 8-1393116-5 is a 3PDT power/signal relay with 15A@277VAC contact rating. Operates at -45 to 0 °C, has 100000 cycle electrical life, and sealed for dust-proofing. Ideal for AC/DC applications requiring momentary relay action in compact spaces.
3PDT
3 Form C
AC
15 A
277 V
15A@277VAC
28 V
15A@28VDC
2.7 W
72 Ω
113 mA
1.969 in (50 mm)
1.531 in (38.9 mm)
35.7 in (906.78 mm)
1.531 x 1.406 x 1.906 in (38.9 x 35.7 x 48.4 mm)
85 g
15 ms
10 ms
0 °C (32 °F)
45 °C (113 °F)
2.2 kVrms
1.2 kVrms
Silver Cadmium Oxide
100000 Cycle(s)
Coil Operate Voltage (AC): 20.4 V
4-1617758-3
TE Connectivity 4-1617758-3 is a DPDT-CO power/signal relay with hermetically sealed sealing. It operates b/w -70 to 125 °C, with 5A max AC/DC contact current. Ideal for applications requiring momentary relay action and SILVER CADMIUM OXIDE end contact material.
DPDT-CO
2 Form C
5 A
500 Ω
-70 °C (-94 °F)
125 °C (257 °F)
Hermetically Sealed
8-1393239-5
8-1393239-5 by TE Connectivity is a SPDT power/signal relay with 1 FORM C configuration. It operates at 10ms, has 9 terminals, and can handle up to 16A@400VAC. Ideal for AC applications requiring latched relay action in a compact design of 29mm x 12.7mm x 15.7mm.
SPDT
Latched
1 Form C
16 A
400 V
16A@400VAC
4000VA@400VAC
595 mW
42 Ω
5 V
120 mA
3.5 V
0.618 in (15.7 mm)
1.142 in (29 mm)
12.7 in (322.58 mm)
1.142 x 0.5 x 0.618 in (29 x 12.7 x 15.7 mm)
14 g
9
0.1417 in (3.599 mm)
Box; Tube
85 °C (185 °F)
5 kVrms
Silver Nickel
UL; VDE
8-1419111-0
TE Connectivity 8-1419111-0 is a 4PDT power/signal relay with 20ms operate time. It has a max AC contact current of 6A@250VAC and operates at temperatures ranging from -40 to 70°C. Ideal for applications requiring momentary relay action in AC/DC circuits.
6 A
6A@250VAC
750 mW
192 Ω
63 mA
9 V
1.102 in (28 mm)
22.5 in (571.5 mm)
1.1 x 0.89 x 1.14 in (28 x 22.5 x 29 mm)
30 g
20 ms
2 kVrms
CE; UL; VDE
9-1617755-2
TE Connectivity 9-1617755-2 is a 4PDT-CO power/signal relay with hermetically sealed sealing. It has a max operating temperature of 125°C and can handle up to 10A AC/DC contact current. Ideal for applications requiring momentary relay action in extreme temperature conditions.
4PDT-CO
10 A
290 Ω
HEV2AN-P-DC24V
Panasonic HEV2AN-P-DC24V is a 2 FORM A DPST relay with 30ms operate time. It has 10 terminals, operates at -40 to 55 °C, and can handle up to 20A@800VDC. Ideal for power & signal applications requiring momentary relay action.
DPST
2 Form A
20 A
1 KV
20A@800VDC
100 mΩ
1.92 W
300 Ω
26.4 V
79 mA
16.8 V
1.551 in (39.4 mm)
41 in (1041.4 mm)
1.969 x 1.614 x 1.551 in (50 x 41 x 39.4 mm)
120 g
10
0.2087 in (5.301 mm)
30 ms
55 °C (131 °F)
VDE
1000 Cycle(s)
SFY2-DC12V
Panasonic SFY2-DC12V is a 4PST power/signal relay with 20ms operate time and 100000 cycles electrical life. It has a max AC contact current of 6A@250VAC, making it suitable for applications requiring momentary relay action in temperatures ranging from -40 to 70°C.
4PST
250 V
30 V
6A@30VDC
670 mW
215 Ω
56 mA
1.8 V
0.571 in (14.5 mm)
1.22 in (31 mm)
28.6 in (726.44 mm)
1.22 x 1.126 x 0.571 in (31 x 28.6 x 14.5 mm)
Tube
CUL; TUV; UL
RT3
Low Profile
SFY4-DC12V
Panasonic SFY4-DC12V is a 6PST power/signal relay with 20ms operate time and 100000 cycles electrical life. Ideal for AC/DC applications, it has a max contact rating of 6A@250VAC and operates at temperatures from -40 to 70°C. With a compact size of 39mm x 28.6mm x 14.5mm, it features through-hole-straight mounting and solder termination for easy installation in various electronic devices.
6PST
1.535 in (39 mm)
1.535 x 1.126 x 0.571 in (39 x 28.6 x 14.5 mm)
ALQ305
ALQ305 by Panasonic is a 1 FORM A SPST power/signal relay with 20ms operate time and 50,000 cycles electrical life. With a max contact DC power rating of 150W@30VDC, it is suitable for applications requiring momentary relay action in moisture-proof environments. This compact relay features a coil resistance of 125 ohm and dielectric strength up to 4000 Vrms, making it ideal for AC/DC switching control on PCBs.
SPST
1 Form A
125 V
10A@125VAC
5A@30VDC
1250VA@250VAC
150W@30VDC
200 mW
125 Ω
40 mA
3.75 V
250 mV
0.63 in (16 mm)
0.787 in (20 mm)
10 in (254 mm)
0.787 x 0.394 x 0.63 in (20 x 10 x 16 mm)
7 g
4
0.1654 in (4.201 mm)
4 kVrms
CUL; UL; VDE
Moisture Proof
50000 Cycle(s)
ALQ306
ALQ306 by Panasonic is a 1 FORM A SPST power/signal relay with 20ms operate time and 50,000 cycle electrical life. With a max contact DC power rating of 150W@30VDC, it is suitable for applications requiring momentary relay action in moisture-proof environments. This compact relay features a coil resistance of 180 ohm and dielectric strength up to 4000 Vrms, making it ideal for AC/DC contact or output supply types.
180 Ω
6 V
33 mA
4.5 V
300 mV
AZ733W-2A-24DE
American Zettler
AZ733W-2A-24DE by American Zettler is a DPST relay with 2 FORM A, operate time of 10ms, and electrical life of 100000 cycles. It has a max contact DC power rating of 300W@150VDC. Ideal for applications requiring momentary relay action in power & signal systems.
10A@400VAC
150 V
10A@150VDC
2500VA@400VAC
300W@150VDC
450 mW
720 Ω
18 V
1.02 in (25.9 mm)
13 in (330.2 mm)
1.142 x 0.512 x 1.02 in (29 x 13 x 25.9 mm)
18 g
6
4 ms
80 °C (176 °F)
2.5 kVrms
Tin
TUV; UL
e3
Epoxy Terminal Sealed
AZ733W-2A-9DE
AZ733W-2A-9DE by American Zettler is a DPST relay with 2 FORM A, operate time of 10ms, and max contact DC power rating of 300W@150VDC. Ideal for applications requiring momentary relay action in power & signal systems due to its high electrical life and sealing properties.
101 Ω
89 mA
6.8 V
AZ822-2C-24DSE
AZ822-2C-24DSE by American Zettler is a DPDT relay with 2 FORM C form, 5ms operate time, and 500000 cycle electrical life. Ideal for power & signal applications with max contact DC power rating of 60W@220VDC. Features include epoxy terminal sealing, gold plating, and random input switching control type.
DPDT
2A@250VAC
125VA@250VAC
192 mW
2.88 kΩ
52.9 V
8 mA
0.472 in (12 mm)
9.8 in (248.92 mm)
0.787 x 0.386 x 0.472 in (20 x 9.8 x 12 mm)
4.5 g
8
0.1378 in (3.5 mm)
5 ms
2 ms
-55 °C (-67 °F)
90 °C (194 °F)
Silver Palladium
UL
500000 Cycle(s)
AZ832-2C-24DE
AZ832-2C-24DE by American Zettler is a DPDT relay with 2 FORM C, 6ms operate time, and 100000 cycle electrical life. Ideal for power & signal applications with 90W@250VDC power rating, MOMENTARY action, and 3A@250VAC contact rating. Suitable for AC/DC supply types in various industries due to its compact size of 20.2mm x 10mm x 10.65mm and weight of 5g.
3 A
3A@250VAC
3A@250VDC
250VA@250VAC
90W@250VDC
19.2 V
0.419 in (10.65 mm)
0.795 in (20.2 mm)
0.795 x 0.394 x 0.419 in (20.2 x 10 x 10.65 mm)
5 g
0.1181 in (3 mm)
6 ms
FCC; UL
G6C-1117C-US-DC12
Omron
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL; VDE;
380 V
10A@380VAC
10A@125VDC
5A@250VAC
30 mΩ
16.7 mA
8.4 V
0.394 in (10 mm)
15 in (381 mm)
0.787 x 0.591 x 0.394 in (20 x 15 x 10 mm)
5.6 g
-25 °C (-13 °F)
Silver Alloy
CSA; TUV; UL; VDE
G6C-2114C-US-DC24
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL; VDE;
2 Form A, B
8 A
8A@380VAC
8A@125VDC
3.5A@250VAC
8.3 mA
2.4 V
G6C-2117C-US-DC24
Omron G6C-2117C-US-DC24 is a DPST power/signal relay with 2 FORM A,B. It has an operate time of 10ms and electrical life of 100,000 cycles. With a coil voltage of 24V DC, it's ideal for applications requiring momentary relay action in PCBs.
G8P-1A4P-BG-DC12
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE;
20A@250VAC
20A@28VDC
900 mW
155 Ω
77 mA
0.791 in (20.1 mm)
1.264 in (32.1 mm)
27.7 in (703.58 mm)
1.264 x 1.091 x 0.791 in (32.1 x 27.7 x 20.1 mm)
105 °C (221 °F)
CSA; UL; VDE
40000 Cycle(s)
G8PT
KRPA-11DG-125
TE Connectivity's KRPA-11DG-125 is a DPDT power/signal relay with 2 FORM C configuration. With a coil resistance of 120 ohm and max AC contact current of 10A@240VAC, it's ideal for applications requiring random input switching control. This compact relay, measuring 35.71mm x 35.71mm x 50.8mm, offers high insulation resistance of 1000000000 ohm and dielectric strength b/w contacts/coil at 1000 Vrms.
10A@240VAC
1.2 W
120 Ω
2 in (50.8 mm)
1.406 in (35.7 mm)
1.406 x 1.406 x 2 in (35.71 x 35.71 x 50.8 mm)
G5Q-14-EUDC24
Omron G5Q-14-EUDC24 is a SPDT power/signal relay with 1 FORM C, 10ms operate time, and 25000 cycles electrical life. It has a max AC contact current of 10A@277VAC and is suitable for applications requiring momentary relay action in various industries.
10A@277VAC
400 mW
1.44 kΩ
45.6 V
17 mA
0.638 in (16.2 mm)
0.799 in (20.3 mm)
10.3 in (261.62 mm)
0.799 x 0.406 x 0.638 in (20.3 x 10.3 x 16.2 mm)
6.5 g
5
CQC; CSA; UL; VDE
25000 Cycle(s)
Contact Current Ratings are as per NO and NC Rating is 3 A
V23050A1024A542
TE Connectivity's V23050A1024A542 is a 6PST power & signal relay with 4 FORM A, 2 FORM B configuration. It has a body width of 16.5mm and operates at temperatures ranging from -25 to 70 °C. This relay is commonly used in applications requiring AC contact current up to 8A@400VAC.
4 Form A, 2 Form B
8A@400VAC
480 Ω
50 mA
0.65 in (16.5 mm)
2.165 in (55 mm)
16.5 in (419.1 mm)
2.165 x 0.65 x 0.65 in (55 x 16.5 x 16.5 mm)
14
Silver Tin Oxide
CCC; CUL; TUV; UL; VDE
G5RL-1A-E-LNDC5
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CUL; UL; VDE;
16A@250VAC
16A@24VDC
530 mW
47.2 Ω
106 mA
500 mV
G6B-1114C-US-DC12
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
0.807 in (20.5 mm)
0.807 x 0.394 x 0.394 in (20.5 x 10 x 10 mm)
3.5 g
3 kVrms
Sealed Type
1800 Cycle(s)
V23050-A1110-A542
TE Connectivity's V23050-A1110-A542 is a 6PST power/signal relay with 4 FORM A, 2 FORM B configuration. It has a max AC contact current of 8A@400VAC and operates at temperatures ranging from -25°C to 70°C. Ideal for applications requiring momentary relay action in various industries.
10.08 kΩ
110 V
11 mA
83 V
11 V
2.165 x 0.65 x 0.65 in (55 x 16.51 x 16.5 mm)
RT31LA06
TE Connectivity's RT31LA06 is a SPDT power/signal relay with 1 FORM C configuration. It has a max AC contact current of 16A@400VAC and operates b/w -70°C to +85°C. Ideal for applications requiring momentary relay action in AC supply systems.
90 Ω
67 mA
CSA; CUL; UL; VDE
RT2
AZ8-1CH-24DEA
AZ8-1CH-24DEA by American Zettler is a SPDT power/signal relay with 5ms operate time, 180W@150VDC max contact DC power rating, and 90°C max operating temp. Ideal for AC/DC switching applications in various industries due to its high electrical life and sealing features.
300 V
6A@300VAC
6A@150VDC
1800VA@300VAC
180W@150VDC
456 mW
1.28 kΩ
19 mA
0.582 in (14.78 mm)
0.839 in (21.3 mm)
16.18 in (410.972 mm)
0.839 x 0.637 x 0.582 in (21.3 x 16.18 x 14.78 mm)
8 g
180000 Cycle(s)
AZ850-12
AZ850-12 by American Zettler is a DPDT relay with 2 FORM C, 9x5mm in size. It operates at 12V, has gold plating, and offers 100000 cycles electrical life. Ideal for power & signal applications with a max contact DC rating of 1A@220VDC and AC rating of 1A@250VAC.
1 A
1A@250VAC
1A@220VDC
62.5VA@250VAC
30W@220VDC
81 mW
1.028 kΩ
9 mA
0.197 in (5 mm)
0.551 in (14 mm)
9 in (228.6 mm)
0.551 x 0.354 x 0.197 in (14 x 9 x 5 mm)
1.5 g
1 ms
CUL; UL
Socket Mountable
AZ983-1A-12DE
AZ983-1A-12DE by American Zettler is a SPST power/signal relay with 7ms operate time, 100000 cycles electrical life, and 1120W@75VDC max contact DC power rating. Ideal for applications requiring momentary relay action in temperatures ranging from -40°C to 85°C.
80 A
75 V
80A@75VDC
1120W@75VDC
1.8 W
80 Ω
150 mA
7.8 V
29 in (736.6 mm)
1.142 x 1.142 x 1.102 in (29 x 29 x 28 mm)
40 g
0.1142 in (2.901 mm)
7 ms
500 Vrms
Epoxy Resin Sealed
AZ983-1A-12D
AZ983-1A-12D by American Zettler is a 1 FORM A SPST power/signal relay with 7ms operate time and 100000 cycle electrical life. With a max contact DC power rating of 1120W@75VDC, it's ideal for applications requiring latched relay action in temperatures ranging from -40 to 85 °C.
15.6 V
0.0029 in (0.074 mm)
AZ983
AZ983-1A-24D
American Zettler's AZ983-1A-24D is a 1 FORM A SPST power/signal relay with 7ms operate time and 100000 cycle electrical life. With a max contact DC power rating of 1120W@75VDC, it is ideal for applications requiring latched relay action in temperatures ranging from -40 to 85 °C.
320 Ω
31.2 V
AZ983-1C-24D
American Zettler's AZ983-1C-24D is a SPDT power/signal relay with 7ms operate time and 100000 cycle electrical life. With 840W@75VDC max contact DC power rating, it's ideal for applications requiring latched relay action in temperatures ranging from -40 to 85°C.
60 A
60A@75VDC
840W@75VDC
G9EJ-1DC12
Omron G9EJ-1DC12 is a 1 FORM A SPST power/signal relay with 100000 cycle electrical life. It operates at 12V, has 4 terminals, and offers latched relay action. With a coil resistance of 72 ohm, it can handle up to 25A@400VDC current making it ideal for AC/DC applications in various industries.
25 A
25A@400VDC
7.2 V
600 mV
1.181 in (30 mm)
27 in (685.8 mm)
1.22 x 1.063 x 1.181 in (31 x 27 x 30 mm)
50 g
50 ms
Quick Connect
G9EN-1-UVDDC24
POWER/SIGNAL RELAY; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE; Electrical Life: 3000 Cycle(s);
60A@400VAC
60A@400VDC
5 W
115.2 Ω
208 mA
14.4 V
140 g
40 ms
3000 Cycle(s)
RH2B-ULAC24V
Idec
Idec's RH2B-ULAC24V is a DPDT power/signal relay with 20ms operate/release time, 500000 cycles electrical life, and 10A@110VAC max contact AC rating. Ideal for applications requiring momentary relay action in panels with quick connect termination, operating b/w -25°C to 70°C.
10A@110VAC
10A@30VDC
1.19 W
153 Ω
61 mA
1.402 in (35.6 mm)
1.083 in (27.5 mm)
21 in (533.4 mm)
1.083 x 0.827 x 1.402 in (27.5 x 21 x 35.6 mm)
CE; CSA; CUL; TUV; UL
RH
RH2B-UAC220-240V
Idec's RH2B-UAC220-240V is a DPDT power/signal relay with 20ms operate/release time, 500000 cycles electrical life, and 10A@110VAC contact rating. It is used for momentary relay action in applications requiring AC/DC supply, quick connect termination, and panel mounting.
18.82 kΩ
5 mA
RH2B-UAC24V
Idec's RH2B-UAC24V is a DPDT power/signal relay with 20ms operate/release time, 500000 cycles electrical life, and 10A@110VAC max contact AC rating. It is used in applications requiring momentary relay action, with a coil resistance of 153 ohm and quick connect termination for easy installation.
2-1904025-6
TE Connectivity 2-1904025-6 is a SPDT power/signal relay with 1 FORM C form factor. Operate time of 10ms, electrical life of 250k cycles, and max AC contact current of 50A@12VDC. Ideal for applications requiring high-speed switching in industrial control systems.
50 A
50A@12VDC
2.3 W
255 Ω
16 V
3 V
1.024 in (26 mm)
1.122 in (28.5 mm)
28.5 in (723.9 mm)
1.122 x 1.122 x 0.996 in (28.5 x 28.5 x 25.3 mm)
35 g
0.4331 in (11.001 mm)
250000 Cycle(s)
2-1904058-5
TE Connectivity 2-1904058-5 is a Power & Signal Relay with 20.7mm width, 19.3mm height, and -40 to 85°C operating temperature range. It has a max DC contact voltage of 450V and dielectric strength of 2000Vrms. Ideal for panel mounting applications requiring reliable switching in various electronic systems.
450 V
2.9 W
50 Ω
0.76 in (19.3 mm)
1.006 in (25.55 mm)
20.7 in (525.78 mm)
17 g
2-1904058-7
TE Connectivity 2-1904058-7 is a Power/Signal Relay with 36.6mm width, 29.9mm height, and -40 to 85°C operating temperature range. It features SILVER ALLOY contacts, 450V DC contact voltage, and 2000Vrms dielectric strength. Ideal for panel mounting applications requiring reliable power switching in various industries.
3.5 W
41.6 Ω
1.177 in (29.9 mm)
36.6 in (929.64 mm)
39 g
Snap-On
3-1393240-1
TE Connectivity 3-1393240-1 is a 1 FORM A power/signal relay with 12.7mm width, 15.7mm height, and 29mm length/diameter. It operates b/w -70°C to +85°C, handles up to 16A AC/DC current at 400V, and has a coil resistance of 90 ohm. Ideal for panel mounting applications requiring reliable switching in industrial equipment.
4-1415542-8
TE Connectivity 4-1415542-8 is a 2 FORM C power/signal relay with coil resistance of 360 ohm. It has max AC contact current of 8 A and operates b/w temperatures of 70 to 85 °C. Ideal for panel mounting applications in various industries due to its dielectric strength and compact size.
360 Ω
13 g
4-1415542-9
TE Connectivity 4-1415542-9 is a 2 FORM C power/signal relay with max. AC contact current of 8A and coil resistance of 1440 ohm. Ideal for panel mounting applications, it offers dielectric strength up to 1000 Vrms b/w open contacts and operates in temp. range of 70-85°C.
4-1415543-6
TE Connectivity 4-1415543-6 is a 1 FORM C power/signal relay with max AC contact current of 16A and coil resistance of 360 ohm. Ideal for panel mounting applications, it offers dielectric strength up to 1000 Vrms b/w open contacts and operates in temperatures ranging from 70°C to 85°C.
4-1415898-0
TE Connectivity 4-1415898-0 is a 1 FORM A power/signal relay with max AC contact current of 16A and dielectric strength of 1250Vrms. Ideal for panel mounting applications, it operates b/w -70°C to +85°C temperatures, featuring TUNGSTEN end contact material.
420 mW
28.8 kΩ
Box; Tray
1.25 kVrms
Tungsten
5-1415508-1
TE Connectivity 5-1415508-1 is a 1 FORM C power/signal relay with 12.7mm width and 15.7mm height. It operates b/w -70°C to +85°C, handling up to 16A AC/DC current at 400V. Ideal for panel mounting applications, it offers dielectric strength of 1000Vrms b/w open contacts and coil resistance of 240Ω.
600 mW
240 Ω
8-1393243-7
TE Connectivity's 8-1393243-7 is a 2 FORM C power/signal relay with dimensions of 12.7x15.7 mm and weight of 13g. It operates b/w -70 to +85°C, handles up to 8A AC/DC current at 400V, and has a coil resistance of 5520Ω. Ideal for panel mounting applications requiring reliable switching in various industries.
417 mW
5.52 kΩ
48 V
© 2023 All rights reserved
