Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIP and SIP switches are small, manually operated switches used in electronic devices for the purpose of selecting various options or settings. The acronym DIP stands for Dual In-line Package, while SIP stands for Single In-line Package. Both types of switches consist of a series of tiny switch contacts arranged in a row that can be set to either an open or closed position.DIP switches are typically used in older electronic equipment, such as computers and other devices that use integrated circuits. They are usually mounted on a small printed circuit board and can be set to a particular configuration by manually moving the tiny levers into the open or closed position.SIP switches, on the other hand, are commonly used in a wide range of electronic devices, such as telecommunications equipment, consumer electronics, and industrial automation. They are generally smaller than DIP switches and are often used in situations where space is at a premium. Like DIP switches, SIP switches are manually operated and can be set to an open or closed position to select a particular option or setting.
Add filters
All
Selected
A6S-6101
Omron
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Operating Temperature: 70 Cel; null: LATCHED; null: SLIDE DIP SWITCH; null: 2;
100 MΩ
200 mΩ
0.025A@24VDC
25 mA
24 V
Surface Mount-Straight
0.637 in (16.18 mm)
0.118 in (3 mm)
6.2 in (157.48 mm)
Tube
Solder
Gold
-20 °C (-4 °F)
70 °C (158 °F)
1000 Cycle(s)
e4
A6S-6102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLAT TYPE; Contact Resistance: 200 mohm; null: YELLOW; Terminal Finish: Gold (Au);
Top Tape Sealed
A6S-6102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; Packing Method: TR; Body Length/Diameter: 16.18 mm; Insulation Resistance: 100000000 ohm;
Tape and Reel
A6S-6104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: .028 inch; End Contact Plating: GOLD; null: YELLOW; null: SLIDE DIP SWITCH;
A6S-7101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: ON-OFF; null: 7; Body Length/Diameter: 18.72 mm; null: SPST;
0.737 in (18.72 mm)
A6S-7102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: ON-OFF; JESD-609 Code: e4; null: LATCHED; Maximum DC Contact Current: .025 A;
A6S-7104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum Contact DC Rating (R Load): 0.025A@24VDC; JESD-609 Code: e4; null: 2; Insulation Resistance: 100000000 ohm;
A6S-8101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLAT TYPE; End Contact Plating: GOLD; Maximum Operating Temperature: 70 Cel; null: 2;
0.837 in (21.26 mm)
A6S-8102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 8; Termination Type: SOLDER; Maximum Contact DC Rating (R Load): 0.025A@24VDC; Maximum DC Contact Voltage: 24 V;
A6S-8102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; Minimum Operating Temperature: -20 Cel; Electrical Life: 1000 Cycle(s); null: 500VAC;
A6S-8104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Contact Resistance: 200 mohm; null: RAISED TYPE; null: HAND/REFLOW; Body Length/Diameter: 21.26 mm;
A6S-9101
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Termination Type: SOLDER; null: SPST; Minimum Operating Temperature: -20 Cel; Contact Resistance: 200 mohm;
0.937 in (23.8 mm)
A6S-9102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Insulation Resistance: 100000000 ohm; Electrical Life: 1000 Cycle(s); Contact Resistance: 200 mohm; Maximum Operating Temperature: 70 Cel;
A6S-9104
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: YELLOW; Termination Type: SOLDER; Terminal Finish: Gold (Au); Insulation Resistance: 100000000 ohm;
SPA04AB
C & K Components
SPA04AB by C & K Components is a 4-section SPST DIP switch with gold over nickel plating. It has an electrical life of 1000 cycles and insulation resistance of 100M ohm. With slide actuator type, it's ideal for PCB applications requiring momentary switch action at temperatures ranging from -30 to 60°C.
50 mΩ
[email protected]
100 μA
100 μV
Through Hole-Right Angle
0.542 in (13.76 mm)
0.126 in (3.2 mm)
8
0.098 in (2.489 mm)
Gold over Nickel
Copper Alloy
-30 °C (-22 °F)
60 °C (140 °F)
RoHS Compliant, 30 Pcs/Tube
204-124STR
Cts
204-124STR by Cts is a SLIDE DIP SWITCH with 4 sections, SPDT function, and LATCHED action. It has a body size of 22.5x10.41x9.12 mm and operates b/w -40 to 85 °C. Ideal for applications requiring SOLDER termination, it offers 0.1A@50VDC max DC contact rating in TAPE AND REEL packing method.
0.1A@50VDC
100 mA
50 V
0.886 in (22.5 mm)
0.359 in (9.12 mm)
10.41 in (264.414 mm)
Tin
-40 °C (-40 °F)
85 °C (185 °F)
Bottom Sealed; Top Tape Sealed
e3
76SC02T
Grayhill
The Grayhill 76SC02T is a DIP & SIP switch with a body width of 9.65in and a body height of 6.27mm. It has two switch sections and a SPDT switch function, making it suitable for applications requiring latched switch action in through-hole mounting.
0.15A@30VDC
150 mA
30 V
Through Hole-Straight
0.382 in (9.7 mm)
0.247 in (6.27 mm)
9.65 in (245.11 mm)
0.156 in (3.962 mm)
Matte Tin over Nickel
2000 Cycle(s)
76SC03ST
Grayhill's 76SC03ST is a SPDT slide DIP switch with 3 sections, offering 2000 cycles electrical life. With a sealing of TOP TAPE SEALED and solder termination type, it operates b/w -40 to 85 °C. Ideal for applications requiring latched switch action and 0.15A@30VDC max contact DC rating.
0.579 in (14.7 mm)
76
206-124RAST
206-124RAST by Cts is a SPDT slide DIP switch with 4 sections, gold terminal finish, and latched switch action. It has a 10000 cycle electrical life, operates b/w -55 to 85 °C, and supports 0.05A@24VDC current rating. Ideal for applications requiring through hole-right angle mounting in electronic devices.
0.05A@24VDC
50 mA
0.3 in (7.62 mm)
9.78 in (248.412 mm)
-55 °C (-67 °F)
10000 Cycle(s)
206
206-9RAST
206-9RAST by Cts is a SLIDE DIP SWITCH with 9 switch sections, SPST function, and LATCHED action. It features BOTTOM SEALED & TOP TAPE SEALED sealing, gold terminal finish, and operates b/w -55°C to 85°C. Ideal for applications requiring THROUGH HOLE-RIGHT ANGLE mounting in DIP & SIP Switches category.
0.986 in (25.04 mm)
204-222ST
204-222ST by Cts is a DPDT slide DIP switch with 2 sections, sealed body, and solder termination. It has a max DC contact rating of 0.1A@50VDC and operates b/w -40 to 85 °C. Ideal for surface mount applications requiring latched switch action.
204
204-4
The Cts 204-4 DIP & SIP Switch offers SPST switch function with 10000 cycles electrical life. It has a body width of 9.78in and is suitable for applications requiring a max DC contact voltage of 24V, operating b/w -55 to 85°C. Ideal for surface mount-straight mounting, it features latched switch action and solder termination in an anti-static tube packing method.
0.486 in (12.34 mm)
0.299 in (7.6 mm)
Anti-Static Tube
78HJ03GWRT
Grayhill's 78HJ03GWRT is a SPDT slide DIP switch with 3 sections, offering 2000 cycles electrical life. With a max DC contact voltage of 30V and current of 0.15A, it is ideal for applications requiring latched switch action in temperatures ranging from -40 to 85°C.
0.681 in (17.3 mm)
0.268 in (6.81 mm)
78HJ04GWT
The Grayhill 78HJ04GWT is a DIP & SIP switch with a white actuator and thermoplastic housing. It has 4 switch sections, SPDT switch function, and gold over nickel end contact plating. This slide dip switch is commonly used in electronic devices for on-off control.
1 GΩ
100 mΩ
0.882 in (22.4 mm)
1-1571999-1
TE Connectivity
TE Connectivity's 1-1571999-1 is a DIP & SIP switch with a white actuator and polyphenylene sulphide housing. It has an electrical life of 1000 cycles, insulation resistance of 100MΩ, and can handle a max AC contact current of 1A. This switch is commonly used in applications requiring SPST functionality and operates within a temperature range of -30°C to 85°C.
1 A
5 V
0.578 in (14.68 mm)
0.236 in (6 mm)
8.15 in (207.01 mm)
10
Box; Tube
0.157 in (3.988 mm)
Wire
RoHS Compliant
1-1571999-4
TE Connectivity's 1-1571999-4 is a white DIP & SIP switch with a polyphenylene sulphide housing material. It has a max operating temperature of 85°C and can handle a max AC contact current of 1A. This piano dip switch is suitable for panel mounting and has a latched switch action.
Panel Mount
2-1571999-7
TE Connectivity 2-1571999-7 is a SPST Piano DIP switch with 8 sections, gold over nickel plating, and polyphenylene sulphide housing. Ideal for applications requiring momentary switch action, it has an electrical life of 1000 cycles and can handle up to 1A AC/DC current at temperatures ranging from -30°C to 85°C.
0.878 in (22.3 mm)
2-1571999-9
TE Connectivity's 2-1571999-9 is a SPST Piano DIP switch with 8 sections, gold over nickel plating, and polyphenylene sulfide housing. It has an electrical life of 1000 cycles and is ideal for panel mounting applications in electronics requiring momentary switch action.
Gold Flash
218-2LPSTF
Cts 218-2LPSTF is a SPST slide DIP switch with 1000 cycles electrical life. It has gold flash terminal finish, operates b/w -55 to 85 °C, and supports 0.025A@24VDC load. Ideal for surface mount applications requiring latched switch action in anti-static tube packaging.
0.228 in (5.8 mm)
0.104 in (2.65 mm)
3.71 in (94.234 mm)
218
218-2LPSTJF
Cts 218-2LPSTJF is a SPST slide DIP switch with 1000 cycles electrical life. It has gold flash terminal finish, operates b/w -55 to 85 °C, and supports 0.025A@24VDC load. Ideal for surface mount applications requiring latched switch action in anti-static tube packaging.
0.106 in (2.7 mm)
218-4LPSTF
The Cts 218-4LPSTF is a DIP & SIP switch with SPST function, gold flash terminal finish, and latched switch action. It has a body width of 5.8in and is suitable for surface mount-straight mounting applications. With an electrical life of 1000 cycles, it operates b/w -55°C to 85°C temperature range.
0.246 in (6.25 mm)
5.8 in (147.32 mm)
218-4LPSTJF
Cts 218-4LPSTJF is a SPST slide DIP switch with 4 sections, gold terminal finish, and latched switch action. It has a body width of 5.8" and height of 2.7mm, suitable for surface mount-straight mounting in applications requiring a max DC contact voltage of 24V at -55 to 85°C temperature range.
218-6LPSTJF
Cts 218-6LPSTJF is a SPST slide DIP switch with 6 sections, gold flash terminal finish, and latched switch action. It has a body width of 5.8", height of 2.7mm, and operates b/w -55 to 85°C. Ideal for applications requiring surface mount straight mounting in anti-static tube packaging.
0.346 in (8.79 mm)
218-6LPSTJRF
Cts 218-6LPSTJRF is a slide DIP switch with 6 sections, SPST function, and gold flash terminal finish. It has a body width of 5.8in and height of 2.7mm, suitable for surface mount applications in electronics with operating temperatures ranging from -55 to 85°C.
218-6LPSTJR
The Cts 218-6LPSTJR is a slide DIP switch with SPST function, gold terminal finish, and latched switch action. With 6 switch sections and 1000 cycles electrical life, it's ideal for surface mount applications requiring a max DC contact voltage of 24V. The switch operates b/w -55°C to 85°C temperatures in tape and reel packing method.
218-6LPSTJ
218-6LPSTJ by Cts is a SPST slide DIP switch with 6 sections, gold flash terminal finish, and latched switch action. It has a body width of 5.8in and operates b/w -55 to 85°C. Ideal for applications requiring surface mount-straight mounting in anti-static tube packaging.
218-8LPSTJF
Cts 218-8LPSTJF is a SPST slide DIP switch with 8 sections, gold flash terminal finish, and latched switch action. It has a body width of 5.8in and height of 2.7mm, suitable for surface mount-straight mounting in various electronic applications requiring reliable switching at temperatures ranging from -55 to 85°C.
0.446 in (11.33 mm)
218-8LPSTJR
Cts 218-8LPSTJR is a SPST slide DIP switch with 8 sections, gold flash terminal finish, and latched switch action. It has a body width of 5.8in, height of 2.7mm, and operates b/w -55 to 85°C. Ideal for surface mount applications requiring 0.025A@24VDC max contact DC rating.
3-1571999-6
TE Connectivity's 3-1571999-6 is a Piano DIP Switch with SPST function. It has 10 switch sections, 1000 cycles electrical life, and 100M ohm insulation resistance. Ideal for applications requiring a max DC contact current of 1A at 5V, such as consumer electronics and industrial control systems.
1.078 in (27.38 mm)
MPG304B
Apem Components
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: ULTRASONIC; null: 0 deg; Contact Resistance: 50 mohm; Body Length/Diameter: 21.7 mm;
0.854 in (21.7 mm)
0.381 in (9.68 mm)
9.7 in (246.38 mm)
16
0.118 in (2.997 mm)
Gold - with Nickel barrier
Brass
-25 °C (-13 °F)
Epoxy Terminal Sealed
MPG
UL94V-0 Materials used
TDS04
TDS04 by Apem Components is a slide DIP switch with 4 positions and SP3T switch function. It has a glass-filled polybutylene terephthalate housing material and brass terminals. This switch is commonly used in applications requiring ON-OFF contact function and can withstand temperatures from -40 to 85 °C.
0.557 in (14.14 mm)
0.232 in (5.9 mm)
10.1 in (256.54 mm)
TDS
KA-J-04-T-G-G-R
E-switch
KA-J-04-T-G-G-R by E-switch is a 4-section SPST slide DIP switch with gold terminal finish. It has an electrical life of 2000 cycles and operates b/w -40°C to 85°C. Ideal for surface mount applications, it is tape sealed and latched, suitable for low current DC loads up to 0.025A@24VDC.
Tape Sealed
Low Profile
6-1825059-2
TE Connectivity's 6-1825059-2 is a SPST slide DIP switch with 10 sections, gold-plated contacts, and polyphenylene sulfide housing. It has a 1000-cycle electrical life, operates b/w -30°C to 85°C, and offers high insulation resistance of 100MΩ. Ideal for OFF-ON contact function applications requiring a latched switch action in electronics.
0.1A@24VDC
1.077 in (27.36 mm)
0.138 in (3.5 mm)
7.5 in (190.5 mm)
Approval: UL
GDH04SA04
TE Connectivity's GDH04SA04 is a 4-section SPST slide DIP switch with gold over nickel plating. With a body height of 2.2mm and max operating temperature of 85°C, it is ideal for panel mounting applications requiring a max DC contact current of 0.1A at 50V. The switch features a white actuator and polyphenylene sulphide housing material sealed with tape for durability.
0.244 in (6.21 mm)
0.087 in (2.2 mm)
SD04H0SB1R
SD04H0SB1R by C & K Components is a DIP switch with 4 sections, SPST function, and gold plating. It has a polyphthalamide housing and insulation resistance of 1Gohm. Ideal for applications requiring a latched switch action, such as in electronic devices operating b/w -40°C to 85°C.
0.1A@25VDC
25 V
0.458 in (11.63 mm)
0.17 in (4.31 mm)
6.68 in (169.672 mm)
Tape and Reel, 13 in
Bright Tin
Beryllium Copper
SD04H0SB1
SD04H0SB1 by C & K Components is a DIP & SIP switch with 4 sections, SPST function, and gold-plated contacts. Made of polyphthalamide housing and brass terminals, it has an electrical life of 2000 cycles. Ideal for applications requiring a latched switch action in temperatures ranging from -40 to 85°C.
SD04H0SBD
SD04H0SBD by C & K Components is a DIP & SIP switch with POLYPHTHALAMIDE housing and BRASS terminals. It offers 2000 cycles electrical life, 1000000000 ohm insulation resistance, and operates b/w -40 to 85 °C. Ideal for applications requiring SPST function, such as OFF-ON contact switching in electronic devices.
1-5435802-2
TE Connectivity 1-5435802-2 is a PIANO DIP SWITCH with 12 SPST sections, GLASS FILLED POLYESTER housing, and TIN plating. It operates b/w -55 to 105 °C with 1.5A AC/DC current. Ideal for THROUGH HOLE-RIGHT ANGLE mounting in various electronic applications.
1.5 A
1.28 in (32.51 mm)
0.29 in (7.36 mm)
0.14 in (3.556 mm)
105 °C (221 °F)
© 2023 All rights reserved
