Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MAX1759EUB
Maxim Integrated
SWITCHED CAPACITOR REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
SWITCHED CAPACITOR REGULATOR
VOLTAGE-MODE
5.5 V
1.6 V
2 V
S-PDSO-G10
e0
3 mm
1
10
85 Cel
-40 Cel
.1 A
PLASTIC/EPOXY
TSSOP
TSSOP10,.19,20
SQUARE
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
245
Not Qualified
1.1 mm
Switching Regulator or Controllers
YES
DOUBLER INVERTER
1800 kHz
INDUSTRIAL
TIN LEAD
GULL WING
.5 mm
DUAL
MAX1790EUA
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
SWITCHING REGULATOR
CURRENT-MODE
PULSE WIDTH MODULATION
2.6 V
3 V
S-PDSO-G8
8
1.2 A
TSSOP8,.19
BOOST
1500 kHz
.65 mm
TPS61002DGSR
Texas Instruments
TPS61002DGSR by Texas Instruments is a switching regulator with 1.3A output current, 840kHz max frequency, and 1.8V output voltage. Ideal for industrial applications requiring boost switcher configuration in a small outline package with dual terminals.
1.8 V
.8 V
1.2 V
e4
1.3 A
260
840 kHz
NICKEL PALLADIUM GOLD
30
TPS61005DGSR
TPS61005DGSR by Texas Instruments is a switching regulator with max output current of 1.3A, operating temp range -40 to 85°C, and boost switcher config. Ideal for industrial applications requiring a compact design and efficient power management in tight spaces.
TPS61006DGS
TPS61006DGS by Texas Instruments is a switching regulator with a max output current of 1.3 A and a control mode of current-mode. It is commonly used in applications such as boost converters for industrial temperature grade environments.
3.3 V
TPS60200DGS
TPS60200DGS by Texas Instruments is a small outline, thin profile switched capacitor regulator with a max output current of 0.1A and a max switching frequency of 400kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring stable 3.3V output voltage in compact designs.
3.6 V
2.4 V
1.07 mm
Other Analog ICs
400 kHz
NICKEL PALLADIUM GOLD SILVER
TPS60201DGS
TPS60202DGS
TPS60202DGS by Texas Instruments is a small outline, thin profile switched capacitor regulator with 10 terminals. It operates b/w -40 to 85°C, providing a min output voltage of 3.3V at a max current of 0.05A. Ideal for industrial applications requiring compact and efficient power management solutions.
.05 A
MAX1730EUB
2.7 V
BUCK
2500 kHz
ICL7660CUA-T
SWITCHED CAPACITOR CONVERTER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
SWITCHED CAPACITOR CONVERTER
10 V
5 V
70 Cel
0 Cel
10 kHz
CMOS
COMMERCIAL
MAX669EUB-T
MAX669EUB-T by Maxim Integrated is a switching controller with current-mode control technique. It operates b/w -40 to 85°C, suitable for industrial applications. With a max switching frequency of 575 kHz and single switcher configuration, it offers precise pulse width modulation for efficient power management.
SWITCHING CONTROLLER
28 V
SINGLE
575 kHz
BICMOS
TL1451AMFKB
TL1451AMFKB by Texas Instruments is a voltage-mode dual switching controller with a max output current of 0.021A and a max switching frequency of 500kHz. Ideal for military applications, this chip carrier package has a temperature range from -55°C to 125°C and operates on input voltages ranging from 3.6V to 50V.
DUAL SWITCHING CONTROLLER
50 V
6 V
S-CQCC-N20
8.89 mm
20
125 Cel
-55 Cel
.021 A
2.5 V
CERAMIC, METAL-SEALED COFIRED
QCCN
CHIP CARRIER
MIL-STD-883
2.03 mm
PHASE-SHIFT
500 kHz
MILITARY
NO LEAD
1.27 mm
QUAD
TL5001AMFKB
TL5001AMFKB by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 6-40V input, 1-50V output, and 500kHz switching frequency. Ideal for BUCK-BOOST applications in military-grade environments due to its -55 to 125 °C operating range and compact CHIP CARRIER package.
40 V
1 V
LCC20,.35SQ
2.1 mA
BUCK-BOOST
BIPOLAR
UC2874QTR-2
UC2874QTR-2 by Texas Instruments is a switching controller with 1A output current, 300 kHz max switching frequency, and -25 to 85°C operating temperature range. Ideal for applications requiring pulse width modulation control in a compact chip carrier package.
24 V
12 V
S-PQCC-J20
8.965 mm
-25 Cel
1 A
QCCJ
LDCC20,.4SQ
NOT SPECIFIED
4.57 mm
PUSH-PULL
300 kHz
OTHER
J BEND
TPS60211DGSR
TPS60211DGSR by Texas Instruments is a small outline, thin profile switched capacitor regulator with boost configuration. It operates b/w -40 to 85°C and has a max output current of 0.1A at a switching frequency of 400kHz. Ideal for applications requiring a nominal input voltage of 2.4V and nominal output voltage of 3.3V in industrial settings.
TPS60211DGS
TPS60211DGS by Texas Instruments is a Boost Switched Capacitor Regulator with 0.1A max output current, operating at -40 to 85°C. It has a small outline package style, suitable for industrial applications requiring a min input voltage of 1.8V and nominal output voltage of 3.3V.
TPS60212DGSR
TPS60212DGSR by Texas Instruments is a SWITCHED CAPACITOR REGULATOR with BOOST switcher config. It has a max output current of 0.05 A, operating temperature range of -40 to 85°C, and nominal input voltage of 2.4 V. Ideal for applications requiring small outline regulators with thin profile and shrink pitch package style.
TPS60213DGS
TPS60213DGS by Texas Instruments is a SWITCHED CAPACITOR REGULATOR with 0.05A output current, operating b/w -40 to 85°C. It has a BOOST switcher config, 3mm length, and is ideal for industrial applications requiring a min input voltage of 1.8V and nominal output voltage of 3.3V.
UCC3809PTR-1
UCC3809PTR-1 by Texas Instruments is a switching controller with a 12V nominal input voltage, 0.8A max output current, and 1000kHz max switching frequency. Ideal for buck-boost applications in commercial-grade electronics due to its compact thin profile package and pulse width modulation control technique.
19 V
2
.8 A
25 mA
1000 kHz
BCDMOS
MAX1675EUA-T
MAX1675EUA-T by Maxim Integrated is an 8-terminal switching regulator with a max output current of 1.5A and boost switcher config. Operating b/w -40 to 85°C, it uses pulse frequency modulation control technique for industrial applications requiring a nominal input voltage of 2V and output voltage of 3.3V at a max switching frequency of 500kHz.
ALSO ADJUSTABLE OUTPUT FROM 2 TO 5.5V; ALSO 5 VOLT OUTPUT AVAILABLE
PULSE FREQUENCY MODULATION
1.1 V
1.5 A
MAX1795EUA
ALSO OPERATES AT 5V; ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 5.5V
.7 V
MAX1797EUA
MAX1797EUA by Maxim Integrated is a VOLTAGE-MODE switching regulator with 1.5A output current, operating at -40 to 85°C. It features BOOST switcher config, BICMOS technology, and 500 kHz max switching frequency. Ideal for industrial applications requiring a compact (3x3mm) thin profile package with dual terminals.
TPS40425RHAR
TPS40425RHAR by Texas Instruments is a voltage-mode dual switching controller with a max output current of 40A and a max switching frequency of 1500kHz. It operates in automotive-grade temperatures, making it suitable for various applications requiring high power efficiency and precise voltage regulation in compact spaces.
VOUT FROM 0.6 V
20 V
4.5 V
S-PQCC-N40
6 mm
3
40
40 A
.6 V
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
AUTOMOTIVE
TPS40425RHAT
TPS40425RHAT by Texas Instruments is a dual switching controller with a max output current of 40A and a max switching frequency of 1500kHz. It operates in voltage-mode control technique, suitable for automotive applications due to its temperature grade and moisture sensitivity level. The chip carrier package style with very thin profile makes it ideal for space-constrained designs.
TPS65283-1RGET
TPS65283-1RGET by Texas Instruments is a dual switching controller with 3.5A max output current, operating at -40 to 85°C. It features pulse width modulation control mode, BUCK switcher config, and supports input voltage range of 4.5V to 18V. Ideal for industrial applications requiring high efficiency power management in compact spaces.
CUR LIM FOR BUCK 2 IS 4.3A; OUTPUT VOLTAGE FROM 0.6 TO 9V
18 V
S-PQCC-N24
4 mm
24
3.5 A
9 V
2000 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
MAX1606EUA
.6 A
MAX1744EUB
MAX1744EUB by Maxim Integrated is a voltage-mode switching controller with buck switcher config. It operates b/w -40 to 85°C, with input voltage range of 4.5-36V and max switching frequency of 330 kHz. Ideal for industrial applications requiring compact design and efficient power management.
36 V
330 kHz
MAX1745EUB
MAX1745EUB by Maxim Integrated is a VOLTAGE-MODE switching controller with BUCK switcher config. Operating b/w -40 to 85 °C, it has a max input voltage of 36V and freq of 330 kHz. Ideal for industrial applications requiring compact design and efficient power management.
240
L5994
STMicroelectronics
L5994 by STMicroelectronics is a 32-terminal switching regulator with a max output current of 1A and a control mode of current-mode. It features a pulse width modulation control technique, push-pull switcher configuration, and operates at a max switching frequency of 345kHz. Ideal for applications requiring efficient power management in compact spaces.
25 V
4.75 V
S-PQFP-G32
7 mm
32
LQFP
QFP32,.35SQ,32
FLATPACK, LOW PROFILE
1.6 mm
345 kHz
.8 mm
TPS5140PAG
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Surface Mount: YES;
ALSO HAS A 12V REGULATED OUTPUT
7 V
S-PQFP-G64
10 mm
4
64
-20 Cel
TFQFP
TQFP64,.47SQ
FLATPACK, THIN PROFILE, FINE PITCH
1.2 mm
L6739TR
L6739TR by STMicroelectronics is a 16-terminal switching controller with current-mode control technique. Operating temperature ranges from -40 to 125 °C, suitable for automotive applications. It features a single switcher configuration and supports input voltages b/w 4.75V to 13.2V, making it ideal for compact designs in various electronic devices.
HAS MAXIMUM OUTPUT VOLTAGE 7V
13.2 V
S-XQCC-N16
16
UNSPECIFIED
TPS62006DGS
TPS62006DGS by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MOS
REG711EA-3/250
REG711EA-3/250 by Texas Instruments is a small outline, thin profile switched capacitor regulator with 8 terminals. It operates b/w -40 to 85°C, with input voltage ranging from 1.8V to 5.5V and output voltage at 3V. Ideal for industrial applications requiring a max output current of 0.05A at a switching frequency of up to 1000kHz.
2.25 V
UCC1806L883B
UCC1806L883B by Texas Instruments is a MIL-STD-883 Class B-rated switching controller with a max output current of 0.5A and a control mode of current-mode PWM. Operating b/w -55°C to 125°C, it features a buck-boost switcher configuration suitable for military-grade applications.
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V
14.5 V
8 V
.5 A
5.17 V
5.02 V
MIL-STD-883 Class B
UCC25705DGK
UCC25705DGK by Texas Instruments is a voltage-mode switching controller with a max supply voltage of 15V and a max output current of 0.02A. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With a small outline package style and pulse width modulation control technique, this device is ideal for buck-boost configurations in electronics where space and efficiency are critical factors.
15 V
11 V
.02 A
5 mA
4000 kHz
MAX1762EUB
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
328 kHz
MAX1856EUB
MAX1856EUB by Maxim Integrated is a switching controller with current-mode control technique. It operates b/w -40 to 85°C, accepting input voltages from 3-28V. With a max switching frequency of 575 kHz, it's ideal for industrial applications requiring efficient power management in a compact form factor.
TPS60204DGS
TPS60204DGS by Texas Instruments is a small outline, thin profile switched capacitor regulator with 10 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.1A at a frequency of 400kHz. Ideal for applications requiring a min output voltage of 3.3V and input voltage ranging from 1.6V to 3.6V.
TPS60205DGS
TPS60205DGS by Texas Instruments is a small outline, thin profile switched capacitor regulator with 10 terminals. It operates b/w -40 to 85°C, providing a min output voltage of 3.3V at a max current of 0.1A. Ideal for industrial applications requiring compact and efficient power management solutions.
ADP2311ACPZ-2-R7
Analog Devices
ADP2311ACPZ-2-R7 by Analog Devices is a 24-terminal switching regulator with current-mode control, operating b/w -40 to 125 °C. It features a buck switcher configuration, PWM control technique, and max switching frequency of 350 kHz. Ideal for automotive applications due to its low profile chip carrier package style.
S-XQCC-N24
e3
350 kHz
MATTE TIN
ADP2311ACPZ-3-R7
ADP2311ACPZ-3-R7 by Analog Devices is a 24-terminal switching regulator with current-mode control, operating b/w -40 to 125 °C. It has a buck switcher configuration, PWM control technique, and supports input voltage range of 4.5V to 18V. Ideal for automotive applications due to its compact size and high switching frequency of 350 kHz.
TPS51220ARTVT
TPS51220ARTVT by Texas Instruments is a 32-terminal switching regulator with max output voltage of 12V and max current of 20A. Ideal for industrial applications, it operates b/w -40 to 85°C, using pulse width modulation control mode at a frequency up to 1MHz.
32 V
S-PQCC-N32
5 mm
20 A
TPS54160DGQG4
TPS54160DGQG4 by Texas Instruments is a switching regulator with 1.5A output current, 2500 kHz max switching frequency, and 150°C max operating temperature. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 3.5V to 60V.
60 V
3.5 V
150 Cel
58 V
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
TPS54160DGQ
TPS54160DGQ by Texas Instruments is a switching regulator with a max output current of 1.5A and max output voltage of 58V, suitable for automotive applications. It operates b/w -40 to 150°C, with a control mode of current-mode PWM and a max switching frequency of 2500kHz. The package style is small outline, heat sink/slub, thin profile, shrink pitch.
NCP5386BMNR2G
Onsemi
NCP5386BMNR2G by Onsemi is a 32-terminal chip carrier with voltage-mode control, PWM technique, and phase-shift switcher config. Operating b/w 0-85 °C, it has a max switching frequency of 1000 kHz. Ideal for applications requiring dual switching controllers in compact designs.
5.25 V
S-XQCC-N32
LCC32,.2SQ,20
TIN
STOD1812PUR
STOD1812PUR by STMicroelectronics is a switching regulator with 3.6V nominal voltage, operating b/w -40 to 125 °C. It features a boost switcher config, pulse frequency modulation control technique, and max switching frequency of 1200 kHz. Ideal for automotive applications due to its small outline package style and surface mount capability.
ALSO OPERATES IN ADJUSTABLE MODE UP TO 20 V
S-PDSO-N10
HVSON
SOLCC10,.12,20
SMALL OUTLINE
3.6
Power Management Circuits
1200 kHz
TPS51222RTVT
TPS51222RTVT by Texas Instruments is a dual switching controller with a max output current of 20A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 85°C) and has a control mode of current-mode PWM, making it suitable for high-power applications requiring precise voltage regulation.
ALSO OPERATES AT 5.03V OUTPUT, ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 12V
AP1601M10G-13
Diodes Incorporated
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 5.5V
100 kHz
© 2023 All rights reserved
