Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ADP1071-1ARWZ-R7
Analog Devices
ADP1071-1ARWZ-R7 by Analog Devices is a current-mode switching controller with a 660 kHz max switching frequency. It operates in automotive-grade temperatures from -40 to 125 °C and supports input voltages ranging from 4.7V to 12.5V, making it ideal for various power management applications. The compact rectangular package with gull wing terminals and small outline style offers easy surface-mount installation in space-constrained designs.
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
12.5 V
4.7 V
8 V
R-PDSO-G16
10.3 mm
1
16
125 Cel
-40 Cel
PLASTIC/EPOXY
SOP
SOP16,.4
RECTANGULAR
SMALL OUTLINE
NOT SPECIFIED
2.65 mm
12 V
YES
SINGLE
660 kHz
AUTOMOTIVE
GULL WING
1.27 mm
DUAL
7.5 mm
ADP1071-1ARWZ-RL
ADP1071-1ARWZ-RL by Analog Devices is a current-mode switching controller with a 660 kHz max switching frequency. It operates in automotive-grade temperature range (-40 to 125 °C) and supports input voltage from 4.7V to 12.5V, making it ideal for various power management applications. The small outline package (10.3mm x 7.5mm x 2.65mm) with gull wing terminals offers space-efficient design for surface-mount applications.
ADP1071-1ARWZ
ADP1071-1ARWZ by Analog Devices is a current-mode switching controller with a max switching frequency of 660 kHz. It operates in automotive-grade temperature range (-40 to 125°C) and supports input voltage from 4.7V to 12.5V, making it ideal for automotive power supply applications.
e3
260
MATTE TIN
30
ISL91132IIMZ-T
Renesas Electronics
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
SWITCHING REGULATOR
5.5 V
2.3 V
3 V
S-PBGA-B16
e1
1.78 mm
85 Cel
3.78 A
VFBGA
SQUARE
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.59 mm
BOOST
2500 kHz
INDUSTRIAL
TIN SILVER COPPER
BALL
.4 mm
BOTTOM
TPS61390RTET
Texas Instruments
TPS61390RTET by Texas Instruments is a switching regulator with 1.2A output current, 800kHz max switching frequency, and 84V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style. Supports pulse width modulation control technique for efficient power management in various electronic devices.
PFM TECHNIQUE ALSO USED; ADJUSTABLE OUTPUT VOLTAGE FROM 20 TO 85V
2.5 V
3.3 V
S-PQCC-N16
e4
3 mm
1.2 A
84 V
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.8 mm
BUCK-BOOST
800 kHz
NICKEL PALLADIUM GOLD
NO LEAD
.5 mm
QUAD
MIC23350YFT-TR
Microchip Technology
MIC23350YFT-TR by Microchip is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 125 °C. It offers a max output current of 3A at a frequency of 1200 kHz, suitable for automotive applications due to its TS16949 screening level and BUCK switcher configuration.
0.8, 0.9, 1, 1.2, 1.5, 1.8, 2.5, 3.3V OUTPUT AVAILABLE; SEATED HT-CALCULATED
VOLTAGE-MODE
2.4 V
5 V
S-XQCC-N16
2.5 mm
3 A
.609 V
.591 V
.6 V
UNSPECIFIED
LCC16,.1SQ,20
TS 16949
.6 mm
BUCK
1200 kHz
MIC2128YML-T5
MIC2128YML-T5 by Microchip is a 16-terminal switching controller with BUCK switcher config. It operates b/w -40 to 125 °C, with max output voltage of 30 V and nominal input voltage of 12 V. Ideal for applications requiring high-frequency operation in compact spaces.
75 V
4.5 V
30 V
1.2 V
HQCCN
CHIP CARRIER, HEAT SINK/SLUG
TS16949
.9 mm
ISL78210ARUZ-T7A
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
It has Converter Input Voltage to GND from 3.3 to 25 v
5.25 V
4.75 V
R-PQCC-N16
2.6 mm
105 Cel
.5 V
VQCCN
LCC16,.07X.1,16
CHIP CARRIER, VERY THIN PROFILE
AEC-Q100
.55 mm
1.5 mA
330 kHz
1.8 mm
ISL8117AFRZ-T7A
ISL8117AFRZ-T7A by Renesas Electronics is a switching regulator with a 12V nominal input voltage, 54V max output voltage, and 2375 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and current-mode control technique. The chip carrier package with very thin profile makes it suitable for space-constrained designs.
60 V
4 mm
3
54 V
LCC16,.16SQ,20
1 mm
4 mA
2375 kHz
ADP5033ACBZ-10-R7
ADP5033ACBZ-10-R7 by Analog Devices is a dual switching controller with a max output current of 0.8A and a max switching frequency of 3500 kHz. It operates in automotive temperature grade range, making it suitable for various applications in the automotive industry such as power management systems.
OUTPUT VOLTAGE RANGE FROM 0.8 TO 5.2 VOLT AND 0.8V TO 3.8V FOR LDO
DUAL SWITCHING CONTROLLER
3.6 V
2 mm
.8 A
1.8 V
BGA16,4X4,20
.66 mm
3500 kHz
DMOS
MP8860GQ-0000-P
Monolithic Power Systems
MP8860GQ-0000-P by Monolithic Power Systems is a 16-terminal switching regulator with a max output current of 1A and a wide input voltage range from 2.8V to 22V. It operates at temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring constant on-time control technique and buck-boost switcher configuration.
CONSTANT ON TIME
22 V
2.8 V
1 A
20.47 V
1 V
LCC16,.12SQ,20
636 kHz
ADP1972ARUZ-R7
ADP1972ARUZ-R7 by Analog Devices is a voltage-mode switching controller with buck-boost configuration. It operates b/w -40 to 125°C, suitable for automotive applications. With a wide input voltage range of 6-60V and compact dimensions of 5x4.4mm, it's ideal for space-constrained designs.
6 V
24 V
5 mm
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
.65 mm
4.4 mm
ADP1972ARUZ-RL
ADP1972ARUZ-RL by Analog Devices is a voltage-mode switching controller with buck-boost configuration. It operates b/w -40 to 125 °C, suitable for automotive applications. With a wide input voltage range of 6-60V and compact design (5x4.4mm), it's ideal for space-constrained environments.
SSL2101T/N1,518
NXP Semiconductors
The NXP Semiconductors SSL2101T/N1,518 is a switching controller with a max input voltage of 40V and operating temperature range from -40 to 100°C. It features pulse width modulation control technique, single switcher configuration, and operates at a max frequency of 200 kHz. Ideal for industrial applications requiring compact design and high efficiency.
40 V
8.5 V
20 V
9.9 mm
100 Cel
1.75 mm
200 kHz
NICKEL PALLADIUM
3.9 mm
TEA1610T/N6,518
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RESONANT CONTROL
13 V
70 Cel
-25 Cel
LSOP
SMALL OUTLINE, LOW PROFILE
1.65 mm
PUSH-PULL
550 kHz
OTHER
TEA1610T/N6/DG,518
NCP1063AD100R2G
Onsemi
NCP1063AD100R2G by Onsemi is a 16-terminal switching controller with current-mode control, operating b/w -40 to 125 °C. It features a buck-boost switcher configuration, supporting a max switching frequency of 100 kHz. Ideal for automotive applications due to its small outline package and matte tin terminal finish.
14 V
100 kHz
A8590KLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A8590KLPTR-T is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a buck switcher config, PWM control mode, and max frequency of 2400 kHz. Ideal for automotive applications due to its compact size (5x4.4mm) and wide input voltage range (4-35V).
ALSO OPERATES IN PFM CONTROL TECHNIQUE
35 V
4 V
5.3 V
2
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
2400 kHz
TPS62134DRGTT
TPS62134DRGTT by Texas Instruments is a 16-terminal switching regulator with PWM control, BUCK configuration, and 3.2A output current. It operates b/w -40 to 85°C, suitable for industrial applications requiring a min input voltage of 3V and max of 17V. The chip carrier package style with a very thin profile makes it ideal for space-constrained designs.
SELECTABLE FIXED OUTPUT VOLTAGE IS 0.7 TO 1.05V
17 V
3.2 A
.7 V
1000 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
LM43602QPWPTQ1
LM43602QPWPTQ1 by Texas Instruments is a switching regulator with 2A output current, 3.3V nominal output voltage, and 2200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
ALSO OPERATES IN PFM CONTROL TECHNIQUE, ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 28 V
36 V
3.5 V
2 A
28 V
2200 kHz
LM43603QPWPTQ1
LM43603QPWPTQ1 by Texas Instruments is a switching regulator with 3A output current, 28V max output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design suitable for space-constrained environments.
ALSO OPERATES IN PFM CONTROL TECHNIQUE; ADJUSTABLE OUTPUT MODE FROM 1 TO 28V
LM43601QPWPTQ1
LM43601QPWPTQ1 by Texas Instruments is a switching regulator with a max output current of 1A and max output voltage of 28V. Ideal for automotive applications, it operates in temp range -40 to 125°C using pulse width modulation control technique. Package style: small outline, heat sink/slug, thin profile.
VOUT RANGE=(1-28 VOLT);PFM TECHNIQUE ALSO USED
TSSOP16,.25
Not Qualified
Switching Regulator or Controllers
LM46000QPWPTQ1
LM46000QPWPTQ1 by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 28V, suitable for automotive applications. It operates b/w -40 to 125°C, has a control mode of current-mode, and uses pulse width modulation as the control technique.
.5 A
LM46001QPWPTQ1
LM46001QPWPTQ1 by Texas Instruments is a switching regulator with 1A max output current, 3.3V nominal output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
LM46002QPWPTQ1
LM46002QPWPTQ1 by Texas Instruments is a switching regulator with 2A output current, 3.3V nominal output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with a small outline package style.
LM536023QPWPRQ1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPTS IN PFM CONTROL TECH, ALSO AVLB VOUT = 5V, ALSO OPTS IN ADJ MODE FROM 3.3 TO 6V
42 V
13.5 V
150 Cel
9.9 V
3.2 V
HSOP
SMALL OUTLINE, HEAT SINK/SLUG
2350 kHz
LM536025QPWPRQ1
LM536025QPWPRQ1 by Texas Instruments is a switching regulator with 2A output current, 3.3V nominal output voltage, and 2350 kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design in a small outline package.
LM53602AQPWPTQ1
LM53602AQPWPTQ1 by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 150°C, and output current up to 2A. Ideal for automotive applications, it offers a wide input voltage range from 3.5V to 42V and precise output voltage control at 3.3V.
LM536033QPWPRQ1
Texas Instruments LM536033QPWPRQ1 is a switching regulator with 3A output current, 3.2V min output voltage, and 9.9V max output voltage. Ideal for automotive applications due to its -40 to 150°C operating temperature range and pulse width modulation control technique.
LM536035QPWPTQ1
LM536035QPWPTQ1 by Texas Instruments is a switching regulator with 3A output current, 3.2V min output voltage, and 9.9V max output voltage. Ideal for automotive applications due to its -40°C to 150°C operating temperature range and pulse width modulation control technique. This compact IC offers a wide input voltage range of 3.5V to 42V and operates at a max frequency of 2350kHz.
A6985F3V3TR
STMicroelectronics
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 2200 kHz;
.635 mm
A6985F3V3
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
A6985F5VTR
STMicroelectronics A6985F5VTR is a switching regulator with max output current of 0.5A and max switching frequency of 2200 kHz. It features a small outline package, dual terminal position, and gull wing terminals. Ideal for applications requiring efficient power management in compact electronic devices.
A6985F5V
A6985FTR
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: CURRENT-MODE;
A6985F
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED;
A6986F3V3
STMicroelectronics A6986F3V3 is a switching regulator with 1.5A output current and 2200 kHz max switching frequency. It features a small outline, thin profile package for surface mount applications. Ideal for current-mode control in various electronic devices.
1.5 A
A6986F
SWITCHING REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
ADP1974ARUZ-R7
ADP1974ARUZ-R7 by Analog Devices is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C, suitable for automotive applications. With a buck-boost switcher config and max freq of 300 kHz, it supports input voltages from 6V to 60V.
300 kHz
VIPER37HD
VIPER37HD by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -25 to 125°C, and a max switching frequency of 127 kHz. It is used in applications requiring pulse width modulation control technique for buck-boost switcher configuration.
23.5 V
SOP16,.25
3.5 mA
127 kHz
VIPER37LDTR
VIPER37LDTR by STMicroelectronics is a versatile switching regulator with a max input voltage of 23.5V and operates in current-mode control. It features a compact SO package, ideal for space-constrained applications. With a max temp of 125 °C, it's perfect for robust designs.
66 kHz
VIPER37LD
VIPER37LD by STMicroelectronics is a versatile switching regulator with a max input voltage of 23.5V and operates in current-mode control. It features a compact SO-16 package, ideal for space-constrained applications. With a max switching frequency of 66kHz, it efficiently manages power in various electronic devices.
LNBH30QTR
LNBH30QTR by STMicroelectronics is a compact switching regulator designed for efficient power management. It operates with a nominal input voltage of 12V, supports a max frequency of 440kHz, and functions in temperatures from -25 °C to 125 °C. Ideal for applications requiring space-saving solutions and reliable performance.
17.5 V
10 V
440 kHz
L6985FTR
L6985FTR by STMicroelectronics is a compact buck switching regulator with a max input voltage of 38 V and output current of 2 A. It features a high switching frequency of 2200 kHz, ideal for efficient power management in space-constrained applications. Its dual terminal design ensures easy surface mounting.
OUTPUT VOLTAGE RANGE FROM 0.85 V TO 38 V
38 V
L6985F
L6985F by STMicroelectronics is a compact switching regulator designed for efficient power management. It supports a nominal input voltage of 12V, delivers up to 2A output current, and operates at a max frequency of 2200kHz. Ideal for space-constrained applications, it features a thin profile with gull-wing terminals.
L6986FTR
L6986FTR by STMicroelectronics is a compact buck switching regulator with a max input voltage of 38V and output current of 2A. It features a high switching frequency of 2200 kHz, ideal for efficient power management in space-constrained applications. Its dual terminal design ensures easy surface mounting.
L6986F
L6986F by STMicroelectronics is a 16-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates at a max switching frequency of 2200 kHz, making it suitable for applications requiring efficient power management in compact spaces. With a small outline package style and pulse width modulation control technique, this device is ideal for use in various buck converter configurations.
TPS62770YFPT
TPS62770YFPT by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 85°C. It offers a min output voltage of 1V and max of 15V, suitable for industrial applications requiring precise power management in compact spaces. With a BUCK-BOOST switcher config and PWM control technique, it can handle up to 0.3A output current at a frequency of 2000kHz.
ADJ O/P VOLTAGE= 1V TO 15V; ALSO OPERATES WITH PFM MODE
1.582 mm
.3 A
15 V
2000 kHz
Tin/Silver/Copper (Sn/Ag/Cu)
© 2023 All rights reserved
