Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ADG431BRZ-REEL
Analog Devices
ADG431BRZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 24 ohm and switching voltage of +-15V. Ideal for industrial applications requiring precise signal routing in compact spaces.
CAN ALSO OPERATE WITH 12V SUPPLY
SPST
R-PDSO-G16
e3
9.9 mm
1
-16.5 V
-13.5 V
-15 V
NC
4
16
68 dB
.85 ohm
24 ohm
85 Cel
-40 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
SOP
SOP16,.25
RECTANGULAR
SMALL OUTLINE
260
5,12/+-15
Not Qualified
1.75 mm
Multiplexer or Switches
16.5 V
13.5 V
15 V
YES
130 ns
165 ns
BREAK-BEFORE-MAKE
CMOS
INDUSTRIAL
MATTE TIN
GULL WING
1.27 mm
DUAL
30
3.9 mm
ADG436BNZ
ADG436BNZ by Analog Devices is a CMOS SPDT multiplexer with 2 functions, 16 terminals, and a max on-state resistance of 25 ohm. It operates at temperatures b/w -40 to 85 °C and has a nominal voltage of +-15 V. Ideal for industrial applications requiring precise signal switching within a temperature range.
SPDT
R-PDIP-T16
20.07 mm
2
72 dB
1 ohm
25 ohm
DIP
DIP16,.3
IN-LINE
12/+-15
5.33 mm
NO
120 ns
125 ns
THROUGH-HOLE
2.54 mm
7.62 mm
ADG453BRZ
ADG453BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 12 ohm max on-state resistance. It operates b/w -40 to 85 °C and has a small outline package suitable for industrial applications requiring separate outputs. With a nominal voltage of 5 V, it offers break-before-make switching and high off-state isolation at -5 V.
ALSO OPERATE WITH 12V SINGLE SUPPLY
-20 V
-4.5 V
-5 V
NO/NC
65 dB
.3 ohm
12 ohm
20 V
4.5 V
5 V
140 ns
220 ns
ADG507AKRZ
ADG507AKRZ by Analog Devices is a CMOS differential multiplexer with 8 channels. It has a max on-state resistance of 450 ohm and operates at an industrial temperature grade of -40 to 85 °C. This multiplexer is commonly used in applications requiring signal switching and isolation.
DIFFERENTIAL MULTIPLEXER
R-PDSO-G28
17.9 mm
-10.8 V
8
28
22.5 ohm
450 ohm
SOP28,.4
12/15,GND/-12/-15
2.65 mm
.02 A
1.5 mA
10.8 V
300 ns
40
7.5 mm
ADG507AKRZ-REEL
ADG507AKRZ-REEL by Analog Devices is a CMOS differential multiplexer with 8 channels. It has a max supply voltage of 16.5V and a nominal off-state isolation of 68dB. This multiplexer is commonly used in industrial applications requiring high signal current and precise resistance matching.
14 ohm
ADG508FBRNZ-REEL7
ADG508FBRNZ-REEL7 by Analog Devices is a single-ended multiplexer with 8 channels. It has a max on-state resistance of 390 ohm and operates at temperatures ranging from -40 to 85 °C. This multiplexer is commonly used in industrial applications requiring signal switching and isolation.
ACTIVE OVERVOLTAGE PROTECTION
SINGLE-ENDED MULTIPLEXER
93 dB
8.1 ohm
390 ohm
.2 mA
150 ns
ADG511BRZ
ADG511BRZ by Analog Devices is a 4-function multiplexer with a max on-state resistance of 50 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a switching time of 375 ns. Ideal for applications requiring high-speed signal routing in compact designs.
-5.5 V
50 ohm
3.3/+-5
MIL-STD-883
5.5 V
375 ns
ADG511BRZ-REEL
ADG511BRZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 50 ohm on-state resistance. It operates at -40 to 85 °C and has a small outline package suitable for industrial applications requiring separate outputs and break-before-make switching.
ADG513BRZ
ADG513BRZ by Analog Devices is a 4-function multiplexer with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a max on-state resistance of 50 ohms, switching time of 375ns, and off-state isolation of 68dB. This CMOS technology switch has a small outline package style and operates in temperatures ranging from -40°C to 85°C.
3.3/5/+-5
ADG513BRZ-REEL
ADG513BRZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 50 ohm and switching voltage of BREAK-BEFORE-MAKE. Ideal for industrial applications requiring CMOS technology and separate output voltages up to ±5V.
ADG604YRUZ-REEL
ADG604YRUZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 2.7V to 5.5V and offers a max on-state resistance of 115 ohm. Ideal for automotive applications, this switch has a fast switch-on time of 105 ns and off-state isolation of 75 dB.
R-PDSO-G14
5 mm
-2.7 V
14
75 dB
2 ohm
115 ohm
125 Cel
TSSOP
TSSOP14,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
3/5/+-5
1.2 mm
.001 mA
2.7 V
45 ns
105 ns
AUTOMOTIVE
.65 mm
4.4 mm
ADG609BRUZ
ADG609BRUZ by Analog Devices is a 16-terminal differential multiplexer with a max on-state resistance of 30 ohm and switching voltage of BREAK-BEFORE-MAKE. It operates in industrial temperature grades, suitable for applications requiring high isolation and low on-state resistance such as signal routing in electronic systems.
OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
85 dB
30 ohm
TSSOP16,.25
75 ns
BICMOS
ADG609BRZ
ADG609BRZ by Analog Devices is a 16-terminal BICMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 30 ohm. Ideal for industrial applications requiring fast switching times and high off-state isolation levels.
.002 mA
ADG611YRUZ-REEL
ADG611YRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching time of 260 ns. Ideal for automotive applications due to its small size, low power consumption, and high isolation level.
.01 A
65 ns
260 ns
ADG613YRUZ
ADG613YRUZ by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching voltage of 5.5 V, suitable for automotive applications requiring high isolation and low signal current.
ADG613YRUZ-REEL
ADG613YRUZ-REEL by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching voltage of 5 V, suitable for automotive applications requiring precise signal routing in compact spaces.
ADG702BRTZ-REEL
ADG702BRTZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm and off-state isolation of 55 dB. Ideal for industrial applications requiring fast switching times and low profile design.
R-PDSO-G6
2.9 mm
6
55 dB
5 ohm
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
3/5
1.45 mm
1.8 V
3 V
13 ns
20 ns
.95 mm
1.6 mm
ADG709CRUZ-REEL
ADG709CRUZ-REEL by Analog Devices is a 16-terminal CMOS differential multiplexer with 4 channels. It operates at temperatures from -40 to 85 °C, with a max on-state resistance of 4.5 ohm and switching voltage of 3/5V. Ideal for industrial applications requiring precise signal routing in compact spaces.
ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY
-2.75 V
-2.25 V
-2.5 V
60 dB
.4 ohm
4.5 ohm
3/5/+-3
.03 A
2.75 V
2.25 V
2.5 V
15 ns
25 ns
ADG711BRZ
ADG711BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 1.8-5.5V supply voltage range. It offers low on-state resistance of 8 ohm, fast switching times (20ns on, 12ns off), and high isolation (58dB). Ideal for industrial applications requiring precise signal routing in compact designs.
CAN ALSO OPERATE WITH 5 V SUPPLY
58 dB
.1 ohm
8 ohm
12 ns
ADG713BRZ
ADG713BRZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and a max on-state resistance of 8 ohm. It operates at temperatures from -40 to 85 °C and has a nominal voltage of 3V. Ideal for industrial applications requiring high isolation and fast switching times.
ADG713BRZ-REEL
ADG713BRZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 3V nominal voltage. It operates in industrial temperature range (-40 to 85°C) and has a max on-state resistance of 8 ohm. Ideal for applications requiring fast switching times (20ns on, 12ns off) and high isolation (58dB).
ADG713BRZ-REEL7
ADG713BRZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 1.8V to 5.5V supply voltage range. With -40 to 85°C operating temperature, it's ideal for industrial applications requiring fast switching (20ns on, 12ns off) and high isolation (58dB).
ADG742BKSZ-REEL
ADG742BKSZ-REEL by Analog Devices is a CMOS SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 5 ohm, switching time of 20 ns, and off-state isolation of 55 dB. Ideal for industrial applications requiring fast and reliable signal routing in compact spaces.
CAN ALSO OPERATE WITH 5 VOLT SUPPLY
e4
2 mm
TSSOP6,.08
1.1 mm
NICKEL PALLADIUM GOLD
1.25 mm
ADG1438BRUZ-REEL7
ADG1438BRUZ-REEL7 by Analog Devices is a 20-terminal SPDT switch with 25 ohm Ron, suitable for automotive applications. It operates at -40 to 125 °C and supports Vsup range of +-5/+-15/12 V. With fast switching times of 350 ns, it offers high isolation of 70 dB for precise signal routing.
R-PDSO-G20
6.5 mm
20
70 dB
.6 ohm
TSSOP20,.25
+-5/+-15/12
350 ns
ADG1438BRUZ
ADG1438BRUZ by Analog Devices is a SPDT multiplexer with 20 terminals, operating at -40 to 125°C. It features a max on-state resistance of 25 ohm and switching time of 350 ns. Ideal for automotive applications due to its CMOS technology and small outline package design.
ADG1439BRUZ-REEL7
ADG1439BRUZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 20 terminals, and 25 ohm on-state resistance. It operates in automotive-grade temperatures from -40 to 125 °C and is ideal for signal routing applications requiring fast switching times.
ADG1613BRUZ-REEL
ADG1613BRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive-grade temperature range (-40 to 125°C) and supports power supplies of 3.3V, 12V, ±5V. Ideal for applications requiring fast switching (493 ns) and separate output control.
4 ohm
3.3/12/+-5
493 ns
.635 mm
ADG1613BRUZ
ADG1613BRUZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, 16 terminals, and on-state resistance of 4 ohm. It operates in automotive grade temperature range (-40 to 125°C) and has separate output voltage supplies (3.3/12/±5V). Ideal for applications requiring fast switching (493ns) and break-before-make functionality in small outline packages.
ADG1636BRUZ
ADG1636BRUZ by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and is ideal for automotive applications requiring separate output switching with a nominal voltage of 5 V.
.04 ohm
1.2 ohm
281 ns
176 ns
NLAS4501DTT1G
Onsemi
NLAS4501DTT1G by Onsemi is a CMOS SPST switch with 5 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 55 ohm and offers 93 dB off-state isolation. Ideal for military-grade applications requiring a compact, surface-mountable solution with fast switching times.
R-PDSO-G5
3 mm
5
55 ohm
-55 Cel
TSOP5/6,.11,37
2/5.5
2 V
16 ns
MILITARY
Tin (Sn)
1.5 mm
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
R-PBGA-B10
e1
1.965 mm
10
.06 ohm
VFBGA
BGA10,3X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
2/5
50 ns
60 ns
Tin/Silver/Copper (Sn/Ag/Cu)
BALL
.5 mm
BOTTOM
1.465 mm
MC74VHC1G66DTT1G
MC74VHC1G66DTT1G by Onsemi is a SPST switch with 60 ohm Ron, 50 ns switch-on/off time, and 80 dB isolation. It operates at -55 to 125 °C, ideal for military-grade applications requiring fast switching and high isolation in a compact SOT package.
0 V
80 dB
60 ohm
.04 mA
MAKE-BEFORE-BREAK
AD7503JNZ
AD7503JNZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels, 300 ohm max on-state resistance, and 16 terminals. It operates b/w 0 to 70 °C and has a supply voltage of ±15V. Ideal for applications requiring precise signal routing in commercial temperature environments.
19.05 mm
6.8 ohm
300 ohm
70 Cel
0 Cel
.8 mA
COMMERCIAL
AD7503KNZ
AD7503KNZ by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 300 ohm. It operates at +-15V power supplies, has a package style of IN-LINE, and a temperature grade of COMMERCIAL. Ideal for applications requiring precise signal switching in commercial-grade environments.
20.13 mm
+-15
.035 A
80 ns
AD7506KNZ
AD7506KNZ by Analog Devices is a CMOS single-ended multiplexer with 16 channels and a max on-state resistance of 450 ohm. It operates at +-15V power supplies, has a package style of IN-LINE, and offers a nominal off-state isolation of 70 dB. Ideal for commercial applications requiring precise signal switching in electronic circuits.
R-PDIP-T28
37.4 mm
DIP28,.6
6.35 mm
1 mA
1000 ns
1500 ns
15.24 mm
AD8180ARZ
AD8180ARZ by Analog Devices is a video multiplexer with 2 channels, operating at -40 to 85°C. It has a supply voltage range of ±5V, offering 89dB off-state isolation. With a compact rectangular package and dual terminals, it's ideal for industrial applications requiring fast switching times of 10ns.
VIDEO MULTIPLEXER
R-PDSO-G8
4.9 mm
-6 V
-4 V
89 dB
SOP8,.25
+-5
4.75 mA
6 V
4 V
10 ns
BIPOLAR
AD8182ARZ
AD8182ARZ by Analog Devices is a video multiplexer with 2 channels, operating at ±5V supplies. It features a small outline package, industrial temperature grade, and 93dB off-state isolation. Ideal for applications requiring fast switching times and high supply voltage tolerance in industrial settings.
8.65 mm
SOP14,.25
8.5 mA
ADG221KNZ
ADG221KNZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp range, and 90 ohm max on-state resistance. It is used in industrial applications for signal routing with +-15V supplies and 80dB isolation.
19.055 mm
90 ohm
4.32 mm
250 ns
ADG512BRZ
ADG512BRZ by Analog Devices is a CMOS SPST multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 68 dB. Ideal for industrial applications requiring fast switching times and high reliability in a compact small outline package.
ADG528AKNZ
ADG528AKNZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of +/-16.5V and has a max on-state resistance of 450 ohm. With a package style of IN-LINE, it is ideal for industrial applications requiring precise signal switching in temperature ranges from -40 to 85 °C.
R-PDIP-T18
21.97 mm
18
DIP18,.3
4.57 mm
ADG713BRUZ-REEL
ADG713BRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 3V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and offers low on-state resistance (8 ohm). Ideal for applications requiring fast switching times and high isolation levels.
ADG739BRUZ
ADG739BRUZ by Analog Devices is a CMOS multiplexer with 2 functions, 4 channels, and 16 terminals. It operates b/w -40 to 85°C, with a max supply voltage of 5.5V. Ideal for audio/video switching applications due to its low on-state resistance of 11 ohm and high off-state isolation of 55 dB.
AUDIO/VIDEO SWITCH
11 ohm
70 ns
ADG739BRUZ-REEL
ADG739BRUZ-REEL by Analog Devices is a CMOS audio/video switch with 4 channels. It operates at -40 to 85 °C, with a max on-state resistance of 11Ω and nominal off-state isolation of 75dB. Ideal for industrial applications requiring fast switching times and low power consumption.
DG301BDJ-E3
Vishay Intertechnology
DG301BDJ-E3 by Vishay Intertechnology is a SPDT switch with 14 terminals, operating at -40 to 85°C. With a max on-state resistance of 50 ohm and switching time of 150 ns, it's ideal for industrial applications requiring high-speed signal routing. The switch has separate outputs, -15 to +15 V supplies, and offers 62 dB isolation.
R-PDIP-T14
18.285 mm
62 dB
DIP14,.3
5.08 mm
DG303BDJ-E3
Vishay Intertechnology's DG303BDJ-E3 is a CMOS DPST switch with 2 functions, -40 to 85 °C operating temp, and 15 V supply voltage. With a package style of IN-LINE and through-hole terminal form, it offers separate outputs for industrial applications requiring high isolation and fast switching times.
DPST
DG303BDY-E3
Vishay Intertechnology's DG303BDY-E3 is a CMOS DPST switch with 2 functions, -40 to 85 °C operating temp range, and 50 ohm max on-state resistance. Ideal for industrial applications requiring separate output control at +-15 V supplies. Small outline package with dual terminals and matte tin finish ensures reliable performance in compact designs.
DG333ADJ-E3
Vishay Intertechnology's DG333ADJ-E3 is a CMOS SPDT switch with 4 functions, -40 to 85 °C operating temp, and 20 terminals. It has a max on-state resistance of 45 ohm, switching time of 175 ns, and nominal off-state isolation of 72 dB. Ideal for industrial applications requiring precise signal routing in compact spaces.
R-PDIP-T20
25.905 mm
-22 V
45 ohm
DIP20,.3
22 V
145 ns
175 ns
DG406DJ-E3
Vishay Intertechnology's DG406DJ-E3 is a CMOS single-ended multiplexer with 16 channels. It operates at industrial temperature grade (-40 to 85 °C) and has a max on-state resistance of 100 ohm. With a package style of IN-LINE, it is suitable for applications requiring high-speed switching in various electronic circuits.
69 dB
100 ohm
400 ns
© 2023 All rights reserved
