Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Digital potentiometers, also known as DigiPOTs, are electronic devices that allow the user to adjust the resistance of a circuit digitally. They are designed to replace traditional mechanical potentiometers and offer several advantages, such as greater precision, faster response, and remote control.DigiPOTs consist of a set of resistive elements, divided into several segments, and a wiper that can be moved to change the resistance between two terminals. The position of the wiper is controlled by digital signals, which are decoded to select the appropriate resistance segment. DigiPOTs can be programmed to provide a specific resistance value or to change the resistance in response to a specific input signal.DigiPOTs are used in a wide range of applications, such as audio amplifiers, motor control circuits, and power management systems. They offer several advantages over traditional potentiometers, such as faster response time, more precise adjustment, and greater reliability. DigiPOTs also eliminate the need for mechanical parts, which can wear out over time and require replacement.DigiPOTs come in different configurations, including single, dual, and quad-channel versions, each with different resistance ranges and step sizes. They can be controlled by a microcontroller or other digital circuit, and some models offer features such as non-volatile memory, temperature compensation, and programmable resolution.
Add filters
All
Selected
AD5248BRM10-RL7
Analog Devices
AD5248BRM10-RL7 by Analog Devices is a 2-function digital potentiometer with 10k ohm total resistance, controlled via 2-wire serial interface. Suitable for automotive applications, it operates b/w -40 to 125 °C with a bandwidth of 0.6 kHz.
Digital Potentiometers
600 Hz
Linear
10 KΩ
2-Wire Serial
2
20 %
It also operates at 5 V supply
3 V
0 V
5.5 V
-40 °C (-40 °F)
125 °C (257 °F)
Automotive
35 ppm/°C
240 °C (464 °F)
1
Gull Wing
Dual
10
Tin Lead
0.02 in (0.5 mm)
256
0.043 in (1.1 mm)
0.118 in (3 mm)
Square
Plastic/Epoxy
Small Outline, Thin Profile, Shrink Pitch
TSSOP
TSSOP10,.19,20
No
S-PDSO-G10
e0
AD5248BRM100-RL7
AD5248BRM100-RL7 by Analog Devices is a 2-function digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. It operates on 3/5V supplies, has a linear resistance law, and uses a 2-wire serial control interface. Ideal for automotive applications due to its small outline package and wide operating temperature range.
40 Hz
100 KΩ
AD5248BRM100
AD5248BRM100 by Analog Devices is a 2-function, 100k ohm digital potentiometer with 2-wire serial control interface. It operates b/w -40 to 125 °C and has a resistance tolerance of 20%. Ideal for automotive applications due to its small outline package style and low temperature coefficient of 35 ppm/°C.
AD5248BRM50-RL7
AD5248BRM50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a bandwidth of 0.1 kHz.
100 Hz
50 KΩ
AD5248BRM50
AD5248BRM50 by Analog Devices is a 2-function, 10-terminal digital potentiometer with 256 positions and a total resistance of 50k ohm. It operates on 3/5V supplies, has a linear resistance law, and uses a 2-wire serial control interface. Ideal for automotive applications due to its wide temperature range and small form factor.
DS1859B-020
Maxim Integrated
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: LBGA; Package Shape: SQUARE;
20 KΩ
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply
3.3 V
-300 mV
3.6 V
0 °C (32 °F)
70 °C (158 °F)
Commercial
50 ppm/°C
245 °C (473 °F)
3
Ball
Bottom
16
0.039 in (1 mm)
0.059 in (1.5 mm)
0.157 in (4 mm)
GRID ARRAY, LOW PROFILE
LBGA
BGA16,4X4,40
S-PBGA-B16
DS1859B-050
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply
DS1859E-020
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
0.026 in (0.65 mm)
0.173 in (4.4 mm)
0.197 in (5 mm)
Rectangular
TSSOP16,.25
R-PDSO-G16
DS1859E-050
AD5171BRJZ10-R2
AD5171BRJZ10-R2 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 35 ppm/°C temp coefficient, and 64 positions. Ideal for automotive applications due to its low profile design, -40 to 125 °C operating range, and nickel palladium gold finish.
CMOS
30 %
It can also operate from a 5 V nominal supply
260 °C (500 °F)
8
Nickel Palladium Gold
64
0.057 in (1.45 mm)
0.063 in (1.6 mm)
0.114 in (2.9 mm)
Small Outline, Low Profile, Shrink Pitch
LSSOP
TSSOP8,.1
R-PDSO-G8
e4
AD5171BRJZ100-R2
AD5171BRJZ100-R2 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm resistance, 35 ppm/°C temp coefficient, and 3V max terminal voltage. Ideal for automotive applications due to its low profile design, -40 to 125 °C operating range, and nickel palladium gold finish.
60 Hz
AD5171BRJZ5-R2
AD5171BRJZ5-R2 by Analog Devices is a 5000 ohm digital potentiometer with 35 ppm/°C temp coefficient. It features 2-wire serial control interface, operates at -40 to 125 °C, and has a bandwidth of 1.5 kHz. Ideal for automotive applications requiring precise resistance adjustments in compact spaces.
1.5 kHz
5 KΩ
AD5171BRJZ50-R7
AD5171BRJZ50-R7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm resistance, 35 ppm/°C temp coefficient, and 64 positions. It is ideal for automotive applications due to its low profile design, CMOS technology, and wide operating temperature range from -40 to 125 °C.
110 Hz
MCP41010-E/P
Microchip Technology
MCP41010-E/P by Microchip Tech is a 3-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 256 positions, and 20% resistance tolerance. It operates at -40 to 125 °C and is ideal for automotive applications due to its TS16949 screening level. The compact rectangular package with matte tin finish makes it suitable for various electronic designs.
1 kHz
3-Wire Serial
5 V
600 μA
800 ppm/°C
Through-Hole
Matte Tin
0.1 in (2.54 mm)
0.17 in (4.32 mm)
0.3 in (7.62 mm)
0.372 in (9.46 mm)
In-Line
DIP
DIP8,.3
TS 16949
R-PDIP-T8
e3
MCP41010-E/SN
MCP41010-E/SN by Microchip: 3-WIRE SERIAL control interface, 10000 ohm total resistance, 5 V max terminal voltage. Ideal for automotive applications due to TS 16949 screening level and -40 to 125 °C operating temperature range.
30 s
0.05 in (1.27 mm)
0.069 in (1.75 mm)
0.154 in (3.9 mm)
0.193 in (4.9 mm)
Small Outline
SOP
SOP8,.23
MCP41010T-E/SN
MCP41010T-E/SN by Microchip: 3-WIRE SERIAL control interface, 10000 ohm total resistance, 1 kHz nominal bandwidth. Ideal for automotive applications due to TS 16949 screening level and -40 to 125 °C operating temperature range.
MCP41100-E/P
MCP41100-E/P by Microchip is a 100k ohm digital potentiometer with 3-wire serial interface. It operates at -40 to 125 °C and has a resistance tolerance of 20%. Ideal for automotive applications, it offers a bandwidth of 0.145 kHz and requires only 0.6 mA supply current.
145 Hz
MCP41100-E/SN
MCP41100-E/SN by Microchip is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 125 °C, suitable for automotive applications. With a compact design of 4.9mm length and 1.75mm height, it offers precise voltage control up to 5V for various electronic systems.
MCP42010-E/P
MCP42010-E/P by Microchip is a 3-WIRE SERIAL Digital Potentiometer with 10000 ohm total resistance, 256 positions, and 1 kHz bandwidth. Ideal for automotive applications due to its TS16949 screening level and -40 to 125 °C operating temperature range. Package style is IN-LINE with DUAL terminals and matte tin finish.
14
0.75 in (19.05 mm)
DIP14,.3
R-PDIP-T14
MCP42050-E/P
MCP42050-E/P by Microchip Technology is a 3-WIRE SERIAL digital potentiometer with 2 functions, 50000 ohm total resistance, and 256 positions. It has a temperature coefficient of 800 ppm/°C and operates in automotive grade applications. The device features a CMOS technology, operates at -40 to 125 °C, and has a max supply current of 0.6 mA.
280 Hz
MCP42050T-E/SL
MCP42050T-E/SL by Microchip Technology is a digital potentiometer with 2 functions and a total resistance of 50k ohm. It has a linear resistance law, operates at temperatures ranging from -40 to 125 °C, and is commonly used in automotive applications.
40 s
0.341 in (8.65 mm)
SOP14,.24
R-PDSO-G14
MCP42100-E/P
MCP42100-E/P by Microchip Technology is a 3-WIRE SERIAL Digital Potentiometer with 100k ohm total resistance, 256 positions, and 20% resistance tolerance. It operates b/w -40 to 125 °C and has a bandwidth of 0.145 kHz. Ideal for automotive applications due to its TS16949 screening level and CMOS technology.
AD5227BUJZ10-R2
AD5227BUJZ10-R2 by Analog Devices is a Digital Potentiometer with 10000 ohm resistance, 35 ppm/°C temp coefficient, and 64 positions. It operates at -40 to 105 °C, has a 1 mm max seated height, and uses INCREMENT/DECREMENT control interface. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
460 Hz
Increment/Decrement
105 °C (221 °F)
Industrial
Small Outline, Very Thin Profile, Shrink Pitch
VSSOP
AD5228BUJZ10-R2
AD5228BUJZ10-R2 by Analog Devices is a digital potentiometer with a nominal total resistance of 10k ohm and max resistor terminal voltage of 5.5V. It is used in industrial applications, has a temperature range of -40 to 105°C, and operates on power supplies of 3/5V.
Push-Button
32
AD5228BUJZ50-R2
AD5228BUJZ50-R2 by Analog Devices is a digital potentiometer with 50000 ohm resistance, 35 ppm/°C temp coefficient, and 32 positions. It is used in industrial applications for precise resistance adjustments via push-button control interface in a small outline package.
MAX5418META
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
BICMOS
50 Hz
85 °C (185 °F)
No Lead
0.031 in (0.8 mm)
Small Outline, Heat Sink/Slug, Very Thin Profile
HVSON
SOLCC8,.12,25
S-XDSO-N8
MAX5419NETA
25 Hz
200 KΩ
AD5206BRZ10
AD5206BRZ10 by Analog Devices is a 3-wire serial digital potentiometer with 6 functions and 10000 ohm total resistance. It operates in industrial temperature range (-40 to 85 °C) with a bandwidth of 0.721 kHz. Ideal for applications requiring precise resistance adjustments in compact designs.
721 Hz
6
Can also operate from ±2.3 V to ±2.7 V supply
2.5 V
-2.3 V
2.7 V
-2.5 V
700 ppm/°C
24
0.104 in (2.65 mm)
0.295 in (7.5 mm)
0.606 in (15.4 mm)
SOP24,.4
R-PDSO-G24
AD5206BRUZ100
AD5206BRUZ100 by Analog Devices is a 3-wire serial digital potentiometer with 6 functions, 100k ohm total resistance, and 256 positions. It operates b/w -40 to 85 °C and has a max terminal voltage of ±2.7 V. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
69 Hz
0.047 in (1.2 mm)
0.307 in (7.8 mm)
TSSOP24,.25
AD8402ARZ100
AD8402ARZ100 by Analog Devices is a 3-wire serial controlled digital potentiometer with 100k ohm total resistance, 256 positions, and linear resistance law. It operates b/w -40 to 125 °C and is ideal for automotive applications due to its small outline package and CMOS technology.
71 Hz
500 ppm/°C
SOP14,.25
AD8402ARUZ10
AD8402ARUZ10 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 2 functions, 10000 ohm total resistance, and 256 positions. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V. The compact package style makes it suitable for space-constrained designs.
TSSOP14,.25
AD5251BRU1-RL7
AD5251BRU1-RL7 by Analog Devices is a 2-function digital potentiometer with 1000 ohm total resistance, controlled via 2-wire serial interface. Operating temperature range from -40 to 85 °C makes it suitable for industrial applications requiring precise resistance adjustments in compact designs. With a linear resistance law and 64 positions, this CMOS technology-based device offers a bandwidth of 4 kHz for versatile usage scenarios.
4 kHz
1 KΩ
Nonvolatile memory; device supports dual supply operation
-2.25 V
2.75 V
650 ppm/°C
AD5251BRU10-RL7
AD5251BRU10-RL7 by Analog Devices is a 2-function digital potentiometer with 10000 ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
400 Hz
AD5251BRU50-RL7
AD5251BRU50-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, suitable for industrial applications. It offers a linear resistance law, operates b/w -40 to 85 °C, and has a max tolerance of 20%. The package style is small outline with thin profile and shrink pitch.
80 Hz
AD5252BRU1-RL7
AD5252BRU1-RL7 by Analog Devices is a 2-function digital potentiometer with 1000 ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5252BRU100-RL7
AD5252BRU100-RL7 by Analog Devices is a 2-function digital potentiometer with 100k ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85 °C) and has a max resistor terminal voltage of 2.75 V. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5252BRU50-RL7
AD5252BRU50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85 °C) and has a max resistor terminal voltage of 2.75 V. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5253BRU10-RL7
AD5253BRU10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
4
20
0.256 in (6.5 mm)
TSSOP20,.25
R-PDSO-G20
AD5254BRU1-RL7
AD5254BRU1-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 1000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRU10-RL7
AD5254BRU10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 10000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRU100-RL7
AD5254BRU100-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in industrial temperature range (-40 to 85 °C) and is ideal for applications requiring precise resistance adjustments in compact electronic devices.
AD5254BRU50-RL7
AD5254BRU50-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in industrial temperature range (-40 to 85 °C) and has a CMOS technology. Ideal for applications requiring precise resistance adjustments in compact spaces.
MAX5403EUB-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
MAX5408ETE-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
Logarithmic
Quad
Chip Carrier, Heat Sink/Slug, Very Thin Profile
HVQCCN
LCC16,.16SQ,25
S-XQCC-N16
MAX5418META-T
MAX5428EUA-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
TSSOP8,.19
S-PDSO-G8
MAX5439EUD-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
200 Hz
Device supports dual supply operation
15 V
-15 V
128
MAX5450EUB-T
© 2023 All rights reserved
