Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MCP4331T-503E/ST
Microchip Technology
MCP4331T-503E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, suitable for automotive applications. It operates b/w -40 to 125 °C with a max voltage of 5.5 V, offering precise control in compact dimensions.
CMOS
Digital Potentiometers
200 Hz
Linear
50 KΩ
3-Wire Serial
4
20 %
2.7 V
0 V
5.5 V
450 μA
-40 °C (-40 °F)
125 °C (257 °F)
Automotive
150 ppm/°C
260 °C (500 °F)
40 s
1
Gull Wing
Dual
20
Matte Tin
0.026 in (0.65 mm)
129
0.047 in (1.2 mm)
0.173 in (4.4 mm)
0.256 in (6.5 mm)
Rectangular
Plastic/Epoxy
Small Outline, Thin Profile, Shrink Pitch
TSSOP
TSSOP20,.25
No
TS 16949
R-PDSO-G20
e3
MCP4341-103E/ST
MCP4341-103E/ST by Microchip is a 3-wire serial controlled digital potentiometer with 4 functions, 10000 ohm total resistance, and 150 ppm/°C temperature coefficient. Ideal for automotive applications due to its CMOS technology, -40 to 125 °C operating range, and TS16949 screening level.
1 kHz
10 KΩ
600 μA
Matte Tin - annealed
MCP4351-502E/ST
MCP4351-502E/ST by Microchip Technology is a digital potentiometer with 4 functions and a linear resistance law. It has a nominal total resistance of 5000 ohm and can handle a max resistor terminal voltage of 5.5 V. This device, which operates at temperatures ranging from -40 to 125 °C, is commonly used in automotive applications due to its temperature grade and moisture sensitivity level (MSL) rating of 1.
2 kHz
5 KΩ
257
MCP4351-503E/ML
MCP4351-503E/ML by Microchip: 3-wire serial control interface, 50kΩ total resistance, and 20% resistance tolerance. Ideal for automotive applications due to its CMOS technology and -40°C to 125°C operating temperature range.
No Lead
Quad
0.02 in (0.5 mm)
0.039 in (1 mm)
0.157 in (4 mm)
Square
Chip Carrier, Heat Sink/Slug, Very Thin Profile
HVQCCN
LCC20,.16SQ,20
S-PQCC-N20
MCP4351-503E/ST
MCP4351-503E/ST by Microchip: 4 functions, 50kΩ total resistance, 3-wire serial control. Ideal for automotive applications with -40 to 125°C operating range and TS16949 screening level.
MCP4351T-103E/ST
MCP4351T-103E/ST by Microchip Technology is a 3-WIRE SERIAL digital potentiometer with 4 functions, 10000 ohm total resistance, and 150 ppm/°C temperature coefficient. It is ideal for automotive applications due to its CMOS technology, -40 to 125 °C operating temperature range, and small outline package style.
MCP4361-104E/ST
MCP4361-104E/ST by Microchip: 100kΩ linear digital potentiometer with 3-wire serial control interface. Operating temp -40 to 125°C, suitable for automotive applications. Features 20% resistance tolerance, 257 positions, and 0.6mA max supply current.
100 Hz
100 KΩ
MCP4361-503E/ST
MCP4361-503E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 20% tolerance, and 257 positions. It operates in automotive grade applications with -40 to 125 °C temperature range and 0.6 mA supply current.
AD5253BRU10
Analog Devices
AD5253BRU10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in a compact package.
400 Hz
2-Wire Serial
Nonvolatile memory; device supports dual supply operation
2.5 V
-2.25 V
2.75 V
-2.5 V
85 °C (185 °F)
Industrial
650 ppm/°C
240 °C (464 °F)
30 s
Tin/Lead (Sn85Pb15)
64
e0
AD5253BRU1
AD5253BRU1 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 1000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
4 kHz
1 KΩ
30 %
Tin Lead
AD5253BRU50
AD5253BRU50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 50000 ohm total resistance, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in circuits requiring a linear response.
80 Hz
AD5254BRU100
AD5254BRU100 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.04 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
40 Hz
256
AD5254BRU10
AD5254BRU10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions and 10000 ohm total resistance. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRU1
AD5254BRU1 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 1000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) with a bandwidth of 4 kHz. Ideal for applications requiring precise resistance adjustments in compact designs.
AD5254BRU50
AD5254BRU50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 50000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.08 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
CAT5221WI-00
Catalyst Semiconductor
CAT5221WI-00 by Catalyst Semiconductor is a 2-function Digital Potentiometer with 100kΩ total resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates at -40 to 85°C, has a 2-wire serial control interface, and is ideal for industrial applications requiring precise resistance adjustments in compact designs.
2
Nonvolatile memory
3 V
300 ppm/°C
0.05 in (1.27 mm)
0.104 in (2.64 mm)
0.295 in (7.5 mm)
0.504 in (12.8 mm)
Small Outline
SOP
SOP20,.4
CAT5221WI-10
CAT5221WI-10 by Catalyst Semiconductor is a 2-function digital potentiometer with 10000 ohm total resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates at -40 to 85 °C, suitable for industrial applications requiring precise resistance adjustments in compact designs. The device features a 2-wire serial control interface and matte tin terminal finish for reliable performance.
AD5253BRU10-RL7
AD5253BRU10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
AD5254BRU1-RL7
AD5254BRU1-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 1000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRU10-RL7
AD5254BRU10-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 4 functions, 10000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRU100-RL7
AD5254BRU100-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in industrial temperature range (-40 to 85 °C) and is ideal for applications requiring precise resistance adjustments in compact electronic devices.
AD5254BRU50-RL7
AD5254BRU50-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in industrial temperature range (-40 to 85 °C) and has a CMOS technology. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5254BRUZ1
AD5254BRUZ1 by Analog Devices is a 1000 ohm linear digital potentiometer with 256 positions. It operates at -40 to 105 °C, has a bandwidth of 4 kHz, and uses CMOS technology. Suitable for industrial applications, it features an increment/decrement control interface and a small outline package style.
Increment/Decrement
105 °C (221 °F)
AD5253BRUZ1-RL7
AD5253BRUZ1-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 1000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
AD5253BRUZ100-RL7
AD5253BRUZ100-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.
AD5253BRUZ1
AD5253BRUZ1 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 1000 ohm total resistance, 4 functions, and 650 ppm/°C temperature coefficient. It operates in industrial temperatures (-40 to 85 °C) and has a bandwidth of 4 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5253BRUZ50-RL7
AD5253BRUZ50-RL7 by Analog Devices is a Digital Potentiometer with 50000 ohm resistance, 650 ppm/°C temp coefficient, and 64 positions. It operates b/w -40 to 105 °C, suitable for industrial applications requiring precise resistance control in compact designs.
AD5253BRUZ50
AD5253BRUZ50 by Analog Devices is a Digital Potentiometer with 50000 ohm total resistance, 650 ppm/°C temp coefficient, and 20% resistance tolerance. It is used in industrial applications for precise increment/decrement control with a CMOS technology interface.
AD5254BRUZ100
AD5254BRUZ100 by Analog Devices is a 4-function digital potentiometer with 100kΩ total resistance, linear resistance law, and 256 positions. It operates b/w -40 to 105°C and has a control interface for increment/decrement applications in industrial settings. The package is small outline, thin profile, with shrink pitch and matte tin terminal finish.
X9241AWVIT1
Intersil
Intersil X9241AWVIT1 is a 2-WIRE SERIAL digital potentiometer with 10000 ohm resistance, 4 functions, and 64 positions. It operates b/w -40 to 85 °C for industrial applications requiring precise resistance adjustments in compact spaces.
Rest 3 resistor array values are: 10000 Ω; nonvolatile memory
5 V
-3 V
AD5144TRUZ10-EP-R7
AD5144TRUZ10-EP-R7 by Analog Devices is a 4-function, linear digital potentiometer with 10000 ohm total resistance and 35 ppm/°C temperature coefficient. It operates in military-grade applications, offering 256 positions and a bandwidth of 3 kHz. Ideal for precise voltage control in compact electronic systems.
3 kHz
8 %
5.5 μA
-55 °C (-67 °F)
Military
35 ppm/°C
TSOP20,.25,26
AD5144TRUZ10-EP
AD5144TRUZ10-EP by Analog Devices is a 10000 ohm linear digital potentiometer with 256 positions. It operates b/w -55 to 125 °C, has a bandwidth of 3 kHz, and consumes 0.0055 mA supply current. Ideal for military-grade applications requiring precise resistance adjustments in compact spaces.
© 2023 All rights reserved
