Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
1608126
Phoenix Contact
The Phoenix Contact 1608126 is a Telecom & Datacom Connector with GOLD OVER NICKEL finish. Featuring GLASS FILLED POLYAMIDE insulator, it has 4 contacts for IDC termination. Ideal for telecom and datacom applications, this connector is UL 94V-0 rated and designed for cable mounting.
SHIELDED
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
GOLD OVER NICKEL
MALE
NO
GLASS FILLED POLYAMIDE
e4
CABLE
GENERAL PURPOSE
IDC
4
94V-0
5607-4200-SH
3m Electronic Products Division
5607-4200-SH by 3M is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board mounting applications in telecom and datacom systems, featuring a male plug body style with surface mount termination.
3M, POLARIZED
SPLIT BOARD LOCK
.157 inch
.453 inch
.688 inch
PLUG
GOLD FLASH OVER NICKEL (50)
TIN OVER NICKEL
COPPER ALLOY
RECTANGULAR
500VAC
1000000000 ohm
BLACK
POLYETHYLENE
e3
0.05
LOCKING
RIGHT ANGLE
BOARD
ONE
1
85
-40 Cel
FLASH
POLARIZED HOUSING
1.5 A
UL
COMMERCIAL
Headers and Edge Type Connectors
1.27
SURFACE MOUNT
7
5607-5102-SH
The 3m Electronic Products Division 5607-5102-SH is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. It is used for board mounting with split board lock option, suitable for commercial applications in telecommunications and data communication systems.
.224 inch
.331 inch
.661 inch
STRAIGHT
2
STAGGERED
.9906
SOLDER
5622-1200-ML
5622-1200-ML by 3M is a telecom & datacom connector with body dimensions of 1.593" x 0.266" x 0.507". It features insulation resistance of 1G ohm, dielectric voltage withstand of 500VAC, and gold-nickel mating contacts. Ideal for commercial applications requiring reliable male connectors with surface mount termination in black insulator color.
.266 inch
.507 inch
1.593 inch
RECEPTACLE
S7P15
GOLD (30) OVER NICKEL (50)
SQ PIN-SKT
MULTIPLE MATING PARTS AVAILABLE
YES
DETENT
55
0 Cel
30u
22
5622-4100-ML
5622-4100-ML by 3M is a telecom/datacom connector with insulation resistance of 1G ohm, gold mating contacts, and UL94V-0 flammability rating. It features a male plug body style with right-angle mounting for board applications. Ideal for commercial use in telecommunications and data communication systems.
.221 inch
.433 inch
1.685 inch
Tin (Sn) - with Nickel (Ni) barrier
GUIDE SLOT
PX0845/A
Bulgin
Bulgin's PX0845/A USB connector features gold termination, polyamide6 insulator, and nickel shell finish. Ideal for telecom/datacom applications, with 4 contacts, solder termination, and steel shell material. Male contact gender suitable for board/panel mounting in 94V-0 UL flammability code environments.
USB CONNECTOR
GOLD (30)
GOLD
POLYAMIDE6
BOARD AND PANEL
NICKEL
STEEL
PX0849/A
Bulgin's PX0849/A USB connector features gold termination, polyamide6 insulator, and nickel shell finish. Ideal for telecom/datacom applications, it has 4 contacts with male gender and steel shell material. Suitable for cable/panel mounting with UL94V-0 flammability rating.
CABLE AND PANEL
WITH CABLE ASSEMBLY
USB-AM-S-F-B-TH-R
Samtec
Samtec's USB-AM-S-F-B-TH-R is a 4-contact USB connector with Tin-Nickel finish, PBT insulator, and steel shell. Ideal for board mounting in telecom/datacom applications due to its right-angle male contact design and UL 94V-0 flammability rating.
POLYBUTYLENE TEREPHTHALATE
USB-AM-S-S-B-SM1-R
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: USB A; MIL Conformity: NO; Plating Thickness (inch): 30u;
.177 inch
.472 inch
USB A
1500 Cycles
HIGH TEMPERATURE NYLON
-50 Cel
5084488-1
TE Connectivity
TE Connectivity's 5084488-1 is a Telecom & Datacom Connector with 80 contacts, made of Phosphor Bronze. It features Liquid Crystal Polymer insulator and Tin over Nickel termination finish. Ideal for board mounting applications in telecom and datacom systems.
PHOSPHOR BRONZE
LIQUID CRYSTAL POLYMER
5084488
80
10044471-120200LF
Amphenol Icc
Amphenol Icc's 10044471-120200LF is a Telecom & Datacom Connector with 12 contacts, rated at 0.5A signal current. It features a dielectric voltage of 750VDC and insulation resistance of 1Gohm. Ideal for board and panel mounting applications requiring durability up to 200 cycles.
LOCATING POSTS
.48 inch
.354 inch
1.535 inch
40 mohm
750VDC
200 Cycles
MULTIPLE MATING PARTS AVAILBLE
5
1.5
.5 A
TIN
.053 inch
1.85
12
10044471-121110LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10044471-121110LF is a telecom & datacom connector with 20 contacts, rated at 0.5A signal current. It features a body length of 1.535", insulation resistance of 1Gohm, and dielectric voltage withstand of 750VDC. Ideal for board and panel mounting applications in telecom and datacom systems.
20
10119313-301CLF
Amphenol's 10119313-301CLF USB connector features a body length of 0.303", insulation resistance of 100M ohm, and shell finish in nickel. Ideal for telecom & datacom applications, this male connector with 5 contacts is designed for board mounting with solder termination and staggered PCB contact pattern.
.154 inch
.372 inch
.303 inch
NOT APPLICABLE
50 mohm
USB, SER B SQ
100000000 ohm
GLASS FILLED POLYETHYLENE
1.8034
POLARIZED KEY
Telecom and Datacom Connectors
.079 inch
1.6002
1546907-1
TE Connectivity's 1546907-1 is a Telecom & Datacom Connector with EMI shielding, Nylon66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 85°C, rated for 1.5A signal current. Ideal for cable mounting applications in telecom and datacom systems.
SOLID
NYLON66
1.5A
47151-1002
Molex
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
PANEL MOUNTABLE
SOLDER HOLDING POSTS
.243 inch
.478 inch
.591 inch
Tin/Bismuth (Sn/Bi)
30 mohm
USB, SER A FLAT
300VAC
10000 Cycles
10000000 ohm
e6
MOUNTING FLANGE
-20 Cel
.508
19
74233-201LF
Amphenol Icc's 74233-201LF is a Telecom & Datacom Connector with POLYETHYLENE insulator, TIN shell finish, and 8 contacts. Ideal for cable mounting, this male plug connector has a COPPER ALLOY shell and SOLDER termination. UL Flammability Code: 94V-0.
KEYED, SHIELDED
8
74233-300LF
Amphenol Icc's 74233-300LF is a Telecom & Datacom Connector with POLYETHYLENE insulator, TIN shell finish, and COPPER ALLOY shell material. Featuring 8 contacts, it is a male plug connector for cable mounting with solder termination. Ideal for telecom and datacom applications requiring UL Flammability Code 94V-0 compliance.
3E106-0220KV
3m Electronic Products Division's 3E106-0220KV is a Telecom & Datacom Connector with 0.531" body length, 500M ohm insulation resistance, and 700VAC dielectric voltage. Ideal for board mounting with solder holding posts, this male plug connector has a total of 6 contacts and operates b/w -55 to 85°C.
LOW PROFILE, POLARIZED
.531 inch
GOLD (20) OVER NICKEL
700VAC
500000000 ohm
GLASS FILLED POLYESTER
-55 Cel
2.0066
20u
1 A
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
.118 inch
6
5-6123283-5
TE Connectivity 5-6123283-5 is a Telecom & Datacom Connector with Insulation Resistance of 1MΩ, TIN OVER NICKEL Termination Contact Finish, and 0.715" Body Depth. It features LIQUID CRYSTAL POLYMER Insulator Material and LOCATING POST Board Mounting Option. Ideal for applications requiring a 40-contact MALE PLUG connector with SOLDER termination in telecom and datacom systems.
LOCATING POST
.715 inch
1000000 ohm
115/230VAC
39.37u
40
79610-102
Amphenol Icc 79610-102 is a Telecom & Datacom Connector with 20 contacts, rated at 3A signal current. It features POLYCARBONATE insulator, right-angle mounting style, and solder termination type. With a mating contact pitch of 0.1 inch, it's ideal for commercial applications requiring durable connectors with a polarization key for secure connections.
PACKAGING TRAY, OFF WHITE
.57 inch
.954 inch
1.405 inch
35 mohm
1000 Cycles
WHITE
POLYCARBONATE
0.1
3
2.54
3 A
CSA, UL
.13 inch
10079510-001TLF
The Amphenol Icc 10079510-001TLF is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with 26 contacts, UL 94V-0 flammability rating. It features a right angle mounting style for board surface mount termination. Ideal for telecom and datacom applications requiring male plug connectors.
26
10078837-001LF
10078837-001LF by Amphenol is a telecom & datacom connector with 21 contacts, nickel shell finish, and stainless steel shell material. It is a male surface mount connector for board mounting applications in telecommunications and data communication systems.
STAINLESS STEEL
21
10099099-111LF
The Amphenol Icc 10099099-111LF is a telecom/datacom connector with 0.031" mating contact pitch, 300VDC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in telecom/datacom systems, it features a male contact gender, gold mating finish over nickel, and polyethylene insulator material.
PEG
.209 inch
20 mohm
300VDC
100 Cycles
0.031
8.2042
.7874
10035690-002-3WLF
The Amphenol Communications Solutions 10035690-002-3WLF is a telecom & datacom connector with POLYETHYLENE insulator. Featuring 7 contacts, it has a 94V-0 UL flammability code and solder termination. Ideal for board mounting, this male plug connector is commonly used in telecommunications and data communication applications.
10035690
1932355-1
TE Connectivity 1932355-1 is a Telecom & Datacom Connector with 0.563" body length, 0.607" width, and 0.776" depth. Featuring 100VAC dielectric voltage, it has POLYETHYLENE insulation material. Ideal for telecom applications, this connector offers 9+9 contacts in a polarized housing with AU ON NI finish.
.607 inch
.776 inch
.563 inch
AU ON NI
100VAC
TWO
105
.091 inch
9+9
KUSBX-AP-KIT-SC
Kycon
Kycon's KUSBX-AP-KIT-SC is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm. Ideal for telecom/datacom applications, this male plug has a white insulator and operates b/w -55 to 85°C.
1.616 inch
POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
TM21P-88P(21)
Hirose Electric
The Hirose Electric TM21P-88P(21) is a Telecom & Datacom Connector with 8 contacts, gold-plated termination, and clear insulator. It has an insulation resistance of 100M ohm, withstands up to 500VAC, and operates b/w -25°C to 60°C. Ideal for telecom and datacom applications requiring durable connectors with male contact gender.
1.758 inch
.528 inch
Gold (Au) - with Nickel (Ni) barrier
230 mohm
TELCOM, MODULAR
CLEAR
60
-25 Cel
CRIMP
ZX62D-B-5P8
ZX62D-B-5P8 by Hirose Electric is a USB connector with 5 contacts, rated at 1.8A signal current. It features gold termination finish, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom/datacom applications, it has a durability of 10k cycles and operates b/w -30 to 85°C temperatures.
ROHS COMPLIANT
SOLDERABLE RETENTION CLIPS
.11 inch
.22 inch
.295 inch
35.1392
-30 Cel
1.8 A
.635
8.0064
98028-8092LF
Fci
The Fci 98028-8092LF is a Telecom & Datacom Connector with 8 contacts, made of Polycarbonate insulator and Nickel shell finish. It features Brass Tin shell material, Male contact gender, and Plug body style. Ideal for cable mounting applications in telecom and datacom systems.
POLARIZED
98028
BRASS TIN
36110-1110PL
The 3M Electronic Products Division's 36110-1110PL is a Telecom & Datacom Connector with GOLD FLASH OVER NICKEL termination. It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator and GOLD (8) OVER NICKEL mating contact finish. Ideal for board/cable mounting, this male plug connector has 10 contacts and UL Flammability Code of 94V-0.
3M, POLARIZED, SHROUDED
GOLD (8) OVER NICKEL
GOLD FLASH OVER NICKEL
GLASS FILLED LIQUID CRYSTAL POLYMER
361
BOARD/CABLE
10
1-1734099-2
TE Connectivity 1-1734099-2 is a Telecom & Datacom Connector with 120 contacts, rated at 12V and 1A. Featuring a mating contact pitch of 0.05", it has an insulation resistance of 4MOhm and operates b/w -35°C to +85°C. Ideal for board mounting applications in commercial settings, this connector offers durability up to 500 cycles.
CHAMP
BOARD LOCK
3.391 inch
PREASSEM CONN
Tin (Sn)
15 mohm
CENTRONIC
500 Cycles
.8896
4000000 ohm
1A
-35 Cel
1.9685u
12 V
Other Rectangular Connectors
.122 inch
120
.139
TM21P-88P(03)
The Hirose Electric TM21P-88P(03) is a telecom & datacom connector with 8 contacts, made of copper alloy shell material and polycarbonate insulator. It has a contact finish of Tin (Sn), insulation resistance of 100M ohm, and operates b/w -25 to 60°C. Ideal for commercial applications requiring reliable crimp termination in telecommunications and data communication systems.
EMI SHIELDED TYPE, LATCHED
94V-2
XM9B-18844-10
Omron
Omron's XM9B-18844-10 is a telecom & datacom connector with a body length of 0.646", width of 0.52", and depth of 0.618". It has an insulation resistance of 500MΩ and can withstand voltages up to 500VAC. This connector is commonly used in telecommunications and data communication applications.
.52 inch
.618 inch
.646 inch
JACK
750 Cycles
XM9B
-45 Cel
BRASS
2.032
XM9B-18844-11
Omron XM9B-18844-11 is a telecom & datacom connector with 8 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC, insulation resistance of 500MΩ, and durability for 750 cycles. Ideal for board mounting in applications requiring reliable male connectors with solder termination and staggered PCB contact pattern.
787229-1
TE Connectivity's 787229-1 is a EMI shielded, nickel-finished telecom & datacom connector with 68 contacts. It features IDC termination, UL94V-0 flammability rating, and steel shell material. Ideal for applications requiring male plug connectors in telecom and datacom systems at 115/230VAC mains rating.
68
749195-2
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
.44 inch
#2-56 UNC
SCREW
ZINC ALLOY
1-750913-7
TE Connectivity 1-750913-7 is a Telecom & Datacom Connector with EMI Shielding, Polyester Insulator, and Tin/Lead Termination. It has 68 contacts, rated for 1A signal current, suitable for commercial applications in telecom and datacom systems. Operating temperature range from -55 to 105°C makes it versatile for various environments.
AMPLIMITE
ROUND
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
25 mohm
133.44
.029 inch
GRAY
POLYESTER
e0
TIN-NICKEL
D Type Connectors
28 AWG
30 AWG
13.344
1657834
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Total No. of Contacts: 8; Mating Contact Finish: NOT SPECIFIED;
STANDARD: RJ45, SHIELDED
1608139
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
937-SP-301010R-031
Bel Fuse
Bel Fuse's 937-SP-301010R-031 is a Telecom & Datacom Connector with POLYCARBONATE insulator, UL 94V-0 flammability rating, and 10 contacts. It operates b/w -40 to 85°C, has a plating thickness of 50u, and offers durability up to 750 cycles. Ideal for wire/stranded cable termination in commercial applications.
.312 inch
.885 inch
.46 inch
WIRE, STRANDED
BLUE
50u
937-SP-301010R-K1
Bel Fuse's 937-SP-301010R-K1 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.331" x 0.885". It has 10 contacts, UL94V-0 rated clear polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for commercial telecom applications with IDC termination on cables.
POLARIZATION AVAILABLE
937-SP-301010R-K2
Bel Fuse's 937-SP-301010R-K2 is a telecom & datacom connector with dimensions of 0.46" x 0.312" x 0.845". It features 10 contacts, IDC termination, and clear polycarbonate insulator. Ideal for wire/stranded cable connections in commercial applications.
.845 inch
937-SP-3088R-K1-031
Bel Fuse's 937-SP-3088R-K1-031 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.286" x 0.885". It has 8 contacts, POLYCARBONATE insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability of 750 cycles.
.286 inch
940-SP-3088R-A286
Bel Fuse's 940-SP-3088R-A286 is a telecom and datacom connector with dimensions of 0.46" x 0.312" x 0.845". It has a clear polycarbonate insulator, 1 row loaded, and 8 contacts. This plug-style connector is suitable for wire or stranded cable termination in commercial applications.
937-SP-3088-2PC-A192
Bel Fuse's 937-SP-3088-2PC-A192 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.457" x 0.885". It has 8 contacts, polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability and UL certification.
ROHS COMPLIANT, BULK PKG
.457 inch
937-SP-360808-A218
Bel Fuse's 937-SP-360808-A218 is a telecom and datacom connector with a polycarbonate insulator material and tin shell finish. It has 8 contacts, uses IDC termination type, and is suitable for cable mounting.
937-SP-361010-A161
Bel Fuse's 937-SP-361010-A161 is a Telecom & Datacom Connector with dimensions of 0.54" x 0.36" x 1.046". Made of Polycarbonate, it has a Tin shell finish and Brass shell material. Featuring 10 contacts in a plug style, it is ideal for telecom and datacom applications requiring IDC termination on cables.
.36 inch
1.046 inch
.54 inch
1-5750913-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .293 inch;
.293 inch
.261 inch
2.829 inch
Nickel/Gold (Ni/Au)
100
© 2023 All rights reserved
