Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
1466328-1
TE Connectivity
TE Connectivity's 1466328-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a male plug with crimp termination on cables, operating up to 2 GHz frequency range. Temperature range from -55 to 125°C suits various environments.
VSWR MAX AT 2GHZ, CAPTIVE CONTACT
PLUG
50 ohm
RF CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
MALE
THREADED
NO
YES
POLYTETRAFLUOROETHYLENE
115/230VAC
MULTIPLE MATING PARTS AVAILABLE
4.83-32
SCREW
STRAIGHT
CABLE
ONE
1
2 GHz
125
-55 Cel
GENERAL PURPOSE
GOLD
BRASS
CRIMP
1.2
1467938-1
TE Connectivity's 1467938-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 2 GHz frequency range, with female contact gender and right angle mounting style.
VSWR MAX AT 2GHZ
RECEPTACLE
FEMALE
1467938
RIGHT ANGLE
BOARD
SOLDER
3-1532004-2
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
COMPATIBLE CONTACT: 003-0095-0002
93 ohm
1532004
4-1532005-9
TE Connectivity's 4-1532005-9 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications up to 2 GHz, this male plug connector is designed for cable mounting with crimp termination.
7-1532004-0
TE Connectivity 7-1532004-0 is a threaded RF connector with PTFE insulator. It has a VSWR of 1.2, impedance of 50 ohm, and operates up to 2 GHz. Ideal for applications requiring right angle mounting on cables with male contact gender.
CLAMP SOLDER
3-1532005-5
TE Connectivity's 3-1532005-5 RF Connector features threaded coupling, 50 ohm impedance, and crimp termination. With panel mount capability, it is ideal for cable and panel mounting applications in various electronic devices.
.44 inch
.605 inch
.65 inch
CABLE AND PANEL
1045621-1
TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.
JACK
RF SSMA CONNECTOR
COAX
LOCKING
PANEL
18 GHz
165
-65 Cel
COMMERCIAL
STAINLESS STEEL
RF SMA/SSMA Connectors
1330019-1
TE Connectivity's 1330019-1 RF SMP Connector features an insertion loss of 0.06 dB, dielectric voltage of 1400VAC, and insulation resistance of 5000000000 ohm. Ideal for commercial applications with a frequency up to 3 GHz, this connector is designed for RG-178/U cables with a characteristic impedance of 50 ohm.
RG-178/U
RF SMP CONNECTOR
3 mohm
1400VAC
.06 dB
5000000000 ohm
1330019
3 GHz
BERYLLIUM COPPER
Other RF Connectors
2-330312-2
TE Connectivity's 2-330312-2 RF Connector features a 0.391" body diameter, threaded coupling type, and fluoropolymer insulator material. Ideal for applications requiring a polarized housing, this connector supports RG 161, RG 178A, RG 196, and RG 178 cables with a max operating frequency of 4 GHz.
APPLICABLE CABLES: RG 161/U; RG 178/U; RG 178A/U; RG 196/U
.391 inch
RG 161, RG 178A, RG 196, RG 178
FLUOROPOLYMER
2-330311-2
4 GHz
85
-40 Cel
POLARIZED HOUSING
SILVER
2-330311-1
TE Connectivity 2-330311-1 RF Connector features threaded coupling, fluoropolymer insulator, and brass shell with gold finish. Suitable for RG-174/U cable type, it has a characteristic impedance of 75 ohm. Used in commercial applications with a temperature range of -65 to 85°C.
APPLICABLE CABLES: RG 179A/U, RG 187/U, RG 174/U, RG 188/U
.275 inch
RG-174/U
75 ohm
2-330312-1
1063357-1
TE Connectivity 1063357-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications with -65 to 125 °C operating range. Female crimp termination with stainless steel shell for reliable panel mounting.
.475 inch
1-330723-2
RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Durability: 200 Cycles;
APPLICABLE CABLES: RG 180/U, RG 180A/U, RG 195/U
RG-180/U
BAYONET
200 Cycles
2 A
1.3
1056550-1
TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.
.23 inch
.047 SEMI-RIGID
6 mohm
SNAP
100 Cycles
.62 dB
26.5 GHz
1.35
5-1814821-1
TE Connectivity 5-1814821-1 RF Connector features SCREW coupling, 75 ohm impedance, and brass shell material. Ideal for commercial applications with a frequency up to 1 GHz. Panel mounted F connector with crimp termination and nickel finish for durability.
APPLICABLE CABLES: RG 59B/U, RG 62A/U, RG 140/U, RG 210/U
.803 inch
.374 inch
RF F CONNECTOR
500 Cycles
1 GHz
NICKEL
5-1814826-1
TE Connectivity 5-1814826-1 RF F Connector has 75 ohm impedance, polypropylene insulator, and nickel shell finish. Ideal for RG-59B/U cable types, it is panel mountable with threaded coupling for commercial applications up to 2 GHz frequency.
.846 inch
RG-59B/U
TIN
100 mohm
50 Cycles
POLYPROPYLENE
5-1814826-3
TE Connectivity 5-1814826-3 RF Connector features threaded coupling, polypropylene insulator, and nickel shell finish. With 75 ohm impedance and RG 6 cable compatibility, it is ideal for commercial applications up to 2 GHz frequency range. The panel mount connector has a durability of 50 cycles and operates b/w -55°C to 85°C temperatures.
APPLICABLE CABLE: RG 6/U
RG 6
1996318-1
TE Connectivity's 1996318-1 RF SMPM Connector features a snap coupling type, PTFE insulator material, and 50 ohm impedance. Ideal for commercial applications requiring a durable connector with a max operating frequency of 20 GHz.
.257 inch
RF SMPM CONNECTOR
20 GHz
.123 inch
PRESS FIT
1996705-4
TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.
.85 inch
.392 inch
1.12 inch
105
6.1
8
1996777-2
TE Connectivity's 1996777-2 RF SMPM CONNECTOR has a temp range of -55 to 105°C, with 8 contacts and characteristic impedance of 50 ohm. It features stainless steel shell material, suitable for board mounting applications.
2101510-2
TE Connectivity's 2101510-2 RF SMPM Connector operates b/w -65 to 165°C, with a characteristic impedance of 50Ω. Featuring a stainless steel shell, it has one connector and four contacts for board mounting applications.
4
2157248-1
TE Connectivity's 2157248-1 RF SMPM Connector features a 0.19" body diameter, SNAP coupling type, and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 26 GHz frequency with male contact gender and solder termination.
.328 inch
.19 inch
.047 SEMI-RIGID, FLEXIBLE
26 GHz
.073 inch
1049081-2
TE Connectivity's 1049081-2 RF Connector features a 0.24" body diameter, 0.57" body depth, and 0.169 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for panel mount applications in high-frequency environments requiring a characteristic impedance of 50 ohm. The connector's snap coupling type and gold shell finish make it suitable for use in various RF communication systems.
.57 inch
.24 inch
.169 dB
1.23
1052075-1
TE Connectivity's 1052075-1 RF Connector features 0.665" body length, 0.07 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for commercial applications with a frequency up to 26 GHz, this threaded connector has PTFE insulator material and operates b/w -65°C to 125°C.
APPLICABLE CABLES: RG 188/U; CAPTIVE CENTER CONTACT
.666 inch
.665 inch
RG 188A
.07 dB
10000000000 ohm
PTFE
1.18
1056722-1
TE Connectivity's 1056722-1 RF SMP Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring high-frequency signal transmission in harsh environments.
POLYTETRAFLUORO ETHYLENE/POLYETHYLENE
1056522-1
The TE Connectivity 1056522-1 RF SMP Connector features a body diameter of 0.135", insulation resistance of 5G ohm, and max operating frequency of 40 GHz. It is used in applications requiring a female contact gender, straight mounting style, and characteristic impedance of 50 ohm for commercial reliability at temperatures ranging from -65 to 165°C.
.25 inch
.135 inch
RG 405 SEMI-RIGID
40 GHz
5-1814822-1
TE Connectivity 5-1814822-1 is a RF F CONNECTOR with 75 ohm impedance, 700VAC dielectric voltage, and 50 cycles durability. Ideal for commercial applications at temperatures ranging from -55 to 85 °C, it features a 0.374" body diameter and NICKEL finish.
.827 inch
700VAC
1814822
5-1814822-3
TE Connectivity 5-1814822-3 RF Connector has a body diameter of 0.413" and operates at temperatures from -55 to 85°C. With characteristic impedance of 75 ohm, it is suitable for RG 6 cables and supports up to 1 GHz frequency. Ideal for panel mounting applications requiring a male plug connector with nickel finish brass shell.
.413 inch
5-1634540-1
TE Connectivity 5-1634540-1 RF Connector features threaded coupling, TPX insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack connector with a max operating frequency of 2 GHz.
.515 inch
TPX
ZINC ALLOY
.114 inch
1056551-1
TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.
.265 inch
.12 dB
1056721-1
TE Connectivity's 1056721-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring a single port RF connection with straight mounting style.
1056724-1
TE Connectivity's 1056724-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring high-frequency signal transmission in harsh environments.
1056729-1
1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.
1056731-1
TE Connectivity's 1056731-1 RF Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165°C operating temperature range. Ideal for applications requiring reliable RF connections in various industries.
1056736-1
TE Connectivity's 1056736-1 RF Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring press fit termination in straight mounting style with mains connector rating of 115/230VAC.
1056744-1
TE Connectivity's 1056744-1 RF Connector features threaded coupling, PTFE/PE insulator, and stainless steel shell. With a 50 ohm impedance, it operates b/w -65 to 165°C. Ideal for applications requiring male contact gender and straight mounting style at 115/230VAC mains rating.
6-1393696-7
TE Connectivity's 6-1393696-7 RF CONNECTOR features SNAP coupling, 75 ohm impedance, and operates up to 2 GHz. Ideal for board mounting in applications requiring surface mount termination, this FEMALE connector with RIGHT ANGLE mounting is commonly used in RF systems.
SURFACE MOUNT
2406846-1
TE Connectivity's 2406846-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 40 GHz, such as cable mounting in high-frequency communication systems.
.086 SEMI-RIGID, FLEXIBLE
2406855-1
TE Connectivity's 2406855-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a straight jack with 0.086 semi-rigid or flexible cable termination up to 18 GHz frequency range.
2406869-1
TE Connectivity's 2406869-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a right angle mounted jack with 0.086 semi-rigid or flexible cable types, operating up to 15 GHz.
15 GHz
2406845-1
TE Connectivity's 2406845-1 RF SMPM Connector features SNAP coupling, POLYETHERETHERKETONE insulator, and BERYLLIUM COPPER shell. With a max operating frequency of 40 GHz, it is ideal for applications requiring high-frequency signal transmission in telecommunications and aerospace industries.
POLYETHERETHERKETONE
CX020L2HN
TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.
RG 178
THREADED HOLE
60 GHz
1 A
ALUMINUM ALLOY
2.54
2
1252294-1
The TE Connectivity 1252294-1 RF Connector features a body diameter of 0.177", insulation resistance of 10^10 ohm, and dielectric voltage rating of 1400VAC. Ideal for applications requiring a reliable board and panel mount RF connection with a characteristic impedance of 50 ohm, suitable for frequencies up to 6 GHz in commercial settings.
.211 inch
.177 inch
5 mohm
BOARD AND PANEL
6 GHz
RF MCX/MMCX Connectors
.115 inch
1058574-1
TE Connectivity's 1058574-1 RF Connector features a 0.25" body diameter, 0.39" body depth, and 0.13 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and panel mounting in high-frequency environments.
.39 inch
OTHER RF CONNECTOR
.13 dB
1.14
© 2023 All rights reserved
