Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
FN1394-10-05-11
Schaffner Holding Ag
FN1394-10-05-11 by Schaffner Holding Ag is a mains power connector with dimensions of 2.559" x 1.969" x 2.972". It has a snap coupling type and can operate at temperatures ranging from -25°C to 85°C. This male plug connector is suitable for applications requiring a max rating of 10A, 250VAC.
APPROVAL: ENEC; UL
1.969 inch
2.972 inch
2.559 inch
PLUG
MAINS POWER CONNECTOR
NOT SPECIFIED
MALE
SNAP
NO
YES
10A, 250VAC
CABLE AND PANEL
85
-25 Cel
GENERAL PURPOSE
CE; CSA
SOLDER
3
FN281-2-06
FN281-2-06 by Schaffner Holding Ag is a SNAP-type mains power connector with 3 contacts, rated at 2A and 250VAC. It is IEC compliant, features solder termination, and is designed for panel mounting applications.
STANDARDS: CSA, UL
2A, 250VAC
PANEL
FN282-1-06
FN282-1-06 by Schaffner Holding Ag is a mains power connector with SNAP coupling type. It has a max operating temperature of 85°C and IEC conformity. This male connector, with 3 contacts, is suitable for panel mounting and has a rating of 1A, 250VAC.
1A, 250VAC
FN282-10-06
Schaffner Holding Ag's FN282-10-06 is a SNAP mains power connector with 3 contacts, rated at 10A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
FN282-4-06
FN282-4-06 by Schaffner Holding Ag is a SNAP mains power connector with 3 contacts, rated at 4A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications. This male connector is ideal for various electronic devices requiring reliable power connections.
4A, 250VAC
FN282-6-06
FN282-6-06 by Schaffner Holding Ag is a SNAP mains power connector with 3 contacts, rated at 6A and 250VAC. It features IEC conformity, solder termination, and male contact gender. Ideal for panel mounting applications requiring reliable power connections.
STANDARDS: IEC/EN 60939, UL; CSA
6A, 250VAC
FN282B-2-06
FN282B-2-06 by Schaffner Holding Ag is a SNAP mains power connector with 3 contacts, rated at 2A, 250VAC. It features IEC conformity and solder termination for panel mounting applications. Ideal for use in various electronic devices requiring reliable power connections.
FN282B-4-06
Schaffner Holding Ag's FN282B-4-06 is a SNAP mains power connector with 3 contacts, rated at 4A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
FN282B-6-06
Schaffner Holding Ag's FN282B-6-06 is a SNAP mains power connector with 3 contacts, rated at 6A, 250VAC. It features solder termination and panel mounting, conforming to IEC standards. Ideal for applications requiring reliable male connectors in mains power systems.
FN283-6-06
Schaffner Holding Ag's FN283-6-06 is a SNAP mains power connector with 3 contacts, rated at 6A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
FN284-6-06
FN284-6-06 by Schaffner Holding Ag is a mains power connector with 3 contacts, rated at 6A, 250VAC. It features tin termination finish and SNAP coupling type, suitable for panel mounting applications. With IEC conformity and operating temperatures from -25 to 85°C, it's ideal for various electronic devices.
Tin (Sn)
e3
FN286-2-06
Schaffner Holding Ag's FN286-2-06 is a SNAP mains power connector with 3 contacts, rated at 2A, 250VAC. It conforms to IEC standards and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in mains power systems.
FN286-6-06
Schaffner Holding Ag's FN286-6-06 is a SNAP mains power connector with 3 contacts, rated at 6A and 250VAC. It features IEC conformity, male contact gender, solder termination, and panel mounting type. Ideal for applications requiring reliable power connections in various electronic devices.
FN286B-6-06
Schaffner Holding Ag's FN286B-6-06 is a SNAP mains power connector with 3 contacts, rated at 6A, 250VAC. It features IEC conformity and solder termination, suitable for panel mounting applications.
BZM42/Z0000/55/B
Bulgin
Bulgin's BZM42/Z0000/55/B is a SNAP coupling type MAINS POWER CONNECTOR with 3 contacts, rated at 10A, 250VAC. It features PANEL mounting and SOLDER termination, suitable for various mains power applications.
STANDARDS: UL; VDE; CSA
1683824
Phoenix Contact
MAINS POWER CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Coupling Type: SNAP; Reference Standard: UL; Contact Material: NOT APPLICABLE;
.846 inch
1.968 inch
1.102 inch
NOT APPLICABLE
POLYBUTYLENE TEREPHTHALATE
4A, 24V
CABLE
80
-20 Cel
WITH CABLE ASSEMBLY
UL
WIRE
1683879
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 4A, 24V; Contact Material: NOT APPLICABLE; Minimum Operating Temperature: -20 Cel;
BZH01/Z0000/11
Bulgin's BZH01/Z0000/11 is a SNAP coupling type mains power connector with 3 contacts. It conforms to IEC standards and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in power systems.
MULTIPLE MATING PARTS AVAILABLE
PX0598/15/63
Bulgin's PX0598/15/63 is a mains power connector with 3 contacts, rated at 16/20A, 250VAC. Featuring snap coupling and polyamide insulator, it has brass contacts with tin finish for solder termination. Ideal for panel mounting applications requiring IEC conformity.
STANDARD: IEC/EN 60320-1/C20; UL94V-0; CSA; VDE
TIN
BRASS
POLYAMIDE
16/20A, 250VAC
B84771A0003A000
TDK
TDK's B84771A0003A000 is a SNAP mains power connector with 3 contacts rated at 3A, 250VAC/DC. It features IEC conformity and solder termination, suitable for panel mounting applications.
STANDARDS: IEC/EN 60320-1, UL 1283; CSA C22.2
3A, 250VAC/DC
712-00/00
Qualtek Electronics
Qualtek Electronics' 712-00/00 is a mains power connector with dimensions of 1.14" x 0.86" x 2.04". It has a SNAP coupling type, operates b/w -40 to 70°C, and supports up to 10A at 250VAC. Ideal for cable mounting applications, this male plug connector complies with CSA and UL standards.
APPROVAL: VDE
.86 inch
2.04 inch
1.14 inch
10A, 250 VAC
70
-40 Cel
CSA; UL
BVA01/Z0000/02
Bulgin's BVA01/Z0000/02 is a SNAP coupling type mains power connector with 3 contacts, rated at 10A, 250VAC. It conforms to IEC standards and features solder termination for male contact gender. Ideal for panel mounting applications requiring reliable power connections.
PF0033/20/63
Bulgin PF0033/20/63 is a 10A, 250VAC mains power connector with SNAP coupling. It features TIN finish on brass contacts and POLYAMIDE insulator. Ideal for panel mounting applications requiring IEC conformity.
STANDARD: IEC/EN 60320-1/C14; UL94V-0; CSA; VDE
PF0033/30/63
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: YES;
PX0686/WH
Bulgin PX0686/WH is a mains power connector with 3 contacts, rated at 10A, 250VAC. Featuring nickel termination contact finish and snap coupling type, it is ideal for cable mounting applications requiring IEC conformity. The connector's brass contact material and polyamide insulator make it suitable for male contact gender in various electrical setups.
STANDARDS: IEC/EN 60320-2-2, UL 94V-0, CSA, VDE
NICKEL
PX0686
SCREW
FN261-10-06
Schaffner Holding Ag's FN261-10-06 is a SNAP mains power connector with 3 contacts, rated at 10A, 250VAC. It conforms to IEC standards and has CE and ENEC certifications. Ideal for panel mounting applications requiring solder termination.
STANDARDS: IEC/EN 60939, UL 94V-2; UL 1283; CSA 22.2
CE; ENEC
FN261-4-06
Schaffner Holding Ag's FN261-4-06 is a SNAP mains power connector with 3 contacts, rated at 4A, 250VAC. It conforms to IEC standards and features solder termination for panel mounting. Ideal for applications requiring reliable male mains power connections with CE and ENEC certifications.
FN9260-1-06
The Schaffner Holding Ag FN9260-1-06 is a mains power connector with dimensions 1.811" x 1.378" x 1.831". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a male plug with 3 contacts rated at 1A, 250VAC.
APPROVAL: IEC/EN 60601-1, CSA, ENEC, UL
1.378 inch
1.831 inch
1.811 inch
PLASTIC
CE; CQC
FN9260-10-06
FN9260-10-06 by Schaffner Holding Ag is a mains power connector with dimensions 1.811" x 1.378" x 1.831". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a 10A, 250VAC mains connector with solder termination.
FN9260-4-06
FN9260-4-06 by Schaffner Holding Ag is a mains power connector with dimensions 1.811" x 1.378" x 1.831". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a 4A, 250VAC mains connector with solder termination.
FN9260-6-06
FN9260-6-06 by Schaffner Holding Ag is a mains power connector with SNAP coupling type and plastic insulator material. It has a max operating temperature of 85°C and can handle 6A at 250VAC. Ideal for applications requiring a male plug with 3 contacts, suitable for cable and panel mounting.
FN9260B-1-06
FN9260B-1-06 by Schaffner Holding Ag is a mains power connector with dimensions 1.811" x 1.378" x 1.831". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a male plug with 3 contacts, rated at 1A, 250VAC for cable and panel mounting.
FN9260B-10-06
FN9260B-10-06 by Schaffner Holding Ag is a mains power connector with dimensions 1.811" x 1.378" x 1.831". It has a max operating temperature of 85°C and conforms to IEC standards, suitable for applications requiring a 10A, 250VAC mains connector with snap coupling for cable and panel mounting.
PX0575/15/63
Bulgin PX0575/15/63 is a mains power connector with 3 contacts, rated at 10/15A, 250VAC. It features snap coupling, polyamide insulator, and brass contact material. Ideal for panel mounting applications requiring IEC conformity and solder termination.
10/15A, 250VAC
PX0411/12P/6065
The Bulgin PX0411/12P/6065 is a threaded mains power connector with 12 gold-plated contacts. It has a temperature range of -40 to 80°C and can handle 1A at 50VAC/DC. Ideal for cable mounting applications, it meets CSA and UL standards for reliable performance in various industries.
STANDARD: VDE
Gold (Au)
THREADED
e4
1A, 50VAC/DC
CRIMP
12
3EJS1
TE Connectivity
3EJS1 by TE Connectivity is a mains power connector with SNAP coupling type. It operates b/w -10 to 40°C, suitable for 115/230VAC applications. Featuring solder termination and right angle mounting, it's ideal for panel installations requiring a male contact gender.
STANDARD: IEC 320/C20; UL; CSA; VDE, EMI/RFI SHIELDED
115/230VAC
RIGHT ANGLE
1
40
-10 Cel
15SRB8-S
15SRB8-S by TE Connectivity is a SNAP mains power connector with 3 contacts, rated for 115/230VAC. It has a temperature range of -10 to 40°C and features a straight mounting style for panel installation. Ideal for applications requiring reliable male contact gender in electrical connections.
STANDARDS: CSA, UL; VDE
STRAIGHT
04BEEG3H
Delta Electronics
Delta Electronics' 04BEEG3H is a SNAP coupling type MAINS POWER CONNECTOR with 3 contacts, rated at 4A, 115/250VAC. It features PANEL mounting and SOLDER termination, suitable for various power applications requiring a MALE contact gender.
STANDARDS: CSA; UL; VDE
4A, 115/250VAC
06BEEG3H
Delta Electronics 06BEEG3H is a SNAP coupling type mains power connector with 3 contacts, rated at 6A, 115/250VAC. It features a panel mounting type and solder termination, suitable for various applications requiring male contact gender in electrical systems.
6A, 115/250VAC
1210120071
Molex
Molex 1210120071 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
10A, 250VAC/300VDC
4
1210230278
Molex 1210230278 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
1210230433
Molex 1210230433 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It has a solder termination type and operates b/w -40 to 70°C. Ideal for panel mounting applications requiring reliable male connectors.
1210230438
Molex 1210230438 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70 °C and uses SOLDER termination. Ideal for PANEL mounting in various applications requiring reliable male MAINS POWER CONNECTOR connections.
HBL1447
Hubbell
HBL1447 by Hubbell is a 15A, 125V mains power connector with SNAP coupling type and PVC insulator. Ideal for cable mounting applications, it has a temperature range of -40 to 75°C. Compliant with CSA and NEMA standards, this plug connector features 3 contacts for wire termination.
APPROVAL: UL, IP20
2.19 inch
POLYVINYLCHLORIDE
15A, 125V
75
CSA; NEMA
1-1609112-3
TE Connectivity 1-1609112-3 is a mains power connector with IEC conformity and empty shell. It has a mains connector rating of 115/230VAC, male contact gender, and receptacle body style. Ideal for applications requiring reliable power connections in compliance with IEC 60320 standards.
RECEPTACLE
IEC 60320
1-1609112-8
TE Connectivity's 1-1609112-8 is a mains power connector with IEC conformity and empty shell. Featuring male contact gender, it has a mains connector rating of 115/230VAC. This receptacle type connector follows the reference standard IEC 60320 for various applications.
2-1609114-7
TE Connectivity's 2-1609114-7 is a mains power connector conforming to IEC 60320 standards, with an empty shell and male contact gender. Rated for 115/230VAC, it features a receptacle body style. Ideal for applications requiring reliable power connections in various electronic devices.
HBL5965VY
Hubbell's HBL5965VY is a SNAP coupling type mains power connector with 2 contacts, rated at 15A, 125V. It features a male contact gender and plug body style, suitable for cable mounting applications.
STANDARD: NEMA
HBL
2
© 2023 All rights reserved
