Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Headers and edge type connectors are a type of electrical connector used to make connections between printed circuit boards (PCBs) and other electronic devices. They are commonly used in a wide range of applications, including computers, consumer electronics, and industrial equipment.Headers and edge type connectors typically consist of two or more rows of pins or contacts, which are inserted into corresponding sockets or holes on a PCB or other electronic device. They may include features such as polarization, locking mechanisms, or keying to ensure proper alignment and prevent accidental disconnection.Headers and edge type connectors are available in a variety of configurations, with different pitch sizes, pin counts, and orientations. They may be straight or right-angled, and may be designed for surface mount or through-hole mounting.One advantage of headers and edge type connectors is their ability to provide a reliable and secure connection between PCBs and other electronic devices. They are designed to maintain a stable connection, even when subjected to vibration or other environmental factors that can affect other types of connectors.Headers and edge type connectors are also relatively easy to install and remove, making them a convenient option for use in a wide range of applications. They may include features such as shrouding or other protective features to prevent damage to the pins or contacts during handling or use.
Add filters
All
Selected
SSW-115-01-S-D-030
Samtec
Samtec's SSW-115-01-S-D-030 is a 2-row, 30-contact board connector with phosphor bronze contacts and gold mating finish. Featuring tin termination with nickel barrier, it has a terminal pitch of 2.54mm for solder mounting. Ideal for applications requiring female socket connectors in straight mounting style.
POLARIZED
SOCKET
BOARD CONNECTOR
GOLD (30)
Tin (Sn) - with Nickel (Ni) barrier
FEMALE
PHOSPHOR BRONZE
NO
e3
STRAIGHT
BOARD
2
GENERAL PURPOSE
2.54
SOLDER
30
94V-0
SSW-125-01-S-D-001
Samtec's SSW-125-01-S-D-001 header connector features 0.1" contact pitch, 2.52" body length, and 1410VAC dielectric voltage. Ideal for board connections in applications requiring high durability and reliability at temperatures ranging from -55 to 125°C.
.195 inch
.335 inch
2.52 inch
Matte Tin (Sn) - with Nickel (Ni) barrier
RECTANGULAR
15 mohm
SQ PIN-SKT
1410VAC
1000 Cycles
1000000000 ohm
BLACK
VECTRA E130I
0.1
MULTIPLE MATING PARTS AVAILABLE
ONE
125
-55 Cel
30u
4.7 A
UL
50
SSW-125-01-S-D-LL
Samtec SSW-125-01-S-D-LL is a 2-row, 50-contact board connector with 0.1" pitch and Liquid Crystal Polymer insulator. It features Matte Tin termination finish and Gold mating contacts, suitable for commercial applications requiring reliable connections on PCBs.
LOCKING LEAD
GOLD (30) OVER NICKEL (50)
1.668
LIQUID CRYSTAL POLYMER
SSW-1
LOCKING
COMMERCIAL
Headers and Edge Type Connectors
TMMH-115-01-G-D-RA-ES
Samtec's TMMH-115-01-G-D-RA-ES is a 30-contact board connector with gold over nickel finish, ideal for PCB applications. Featuring a mating contact pitch of 0.079", it offers a rated signal current of 4.5A and operates b/w -55°C to 125°C temperature range.
SHROUDED
.157 inch
.208 inch
1.185 inch
GOLD
GOLD OVER NICKEL
MALE
e4
0.079
RIGHT ANGLE
4.5 A
.103 inch
879371601
Molex
Molex 879371601 is a 16-contact board stacking connector with 2.54mm terminal pitch, UL 94V-0 flammability rating. It features male contacts for solder termination and straight mounting style. Ideal for applications requiring reliable board-to-board connections in electronics manufacturing.
BOARD STACKING CONNECTOR
NOT SPECIFIED
1
16
879371602
Molex 879371602 is a 16-contact board stacking connector with TIN over nickel finish. It has a terminal pitch of 2.54mm and UL94V-0 flammability rating. Ideal for male contact gender applications requiring solder termination on boards.
TIN (98) OVER NICKEL (49)
TIN OVER NICKEL
351710
Lumberg Connect
The Lumberg Connect 351710 is a BOARD CONNECTOR with 10 FEMALE contacts, UL 94V-0 rated. It features IDC termination and CABLE mounting. Ideal for use in Headers & Edge Type Connectors applications.
CABLE
IDC
10
M80-5T11205M2-04-331-00-000
Harwin PLC
The Harwin PLC M80-5T11205M2-04-331-00-000 is a 16-contact board connector with 0.079" mating pitch, gold termination finish, and glass-filled polyphenylene sulfide insulator. It operates b/w -55°C to 125°C, rated for 3A signal current, and has a durability of 500 cycles. Ideal for commercial applications requiring reliable male connectors with hybrid contact style.
TERMINAL PITCH FOR POWER CONTACTS: 4 MM
HOLE .086-.098
.238 inch
.22 inch
1.496 inch
S12P4
Gold (Au)
25 mohm
HYBRID
500 Cycles
2.78
100000000 ohm
GLASS FILLED POLYPHENYLENE SULFIDE
YES
M2X0.4
JACKSCREW
75u
3 A
.129 inch
.199882
350-10-132-00-001101
Preci-dip Sa
350-10-132-00-001101 by Preci-dip Sa is a board connector with 32 contacts, gold-plated brass material, and 0.1" pitch. It has a durability of 500 cycles and operates b/w -55 to 125°C. Ideal for commercial applications requiring high insulation resistance and dielectric voltage withstand capabilities.
.1 inch
3.2 inch
GOLD (10)
BRASS
RND PIN-SKT
1400VAC
10000000000 ohm
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
10u
.164 inch
32
ISDF-08-D-M
The Samtec ISDF-08-D-M is a 16-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring liquid crystal polymer insulator, it has a 0.545" body length and 0.25" width. With a polarized housing and female contact gender, this plug-style connector supports crimp termination for 28-30 AWG wires.
.25 inch
.44 inch
.545 inch
PLUG
ISDF
0.05
LATCH
POLARIZED HOUSING
CRIMP
28 AWG
30 AWG
ISDF-13-D-M
The Samtec ISDF-13-D-M is a 26-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring liquid crystal polymer insulator and crimp termination, it offers reliable connectivity. With a polarized housing and locking mechanism, this female connector suits cable mounting setups efficiently.
.795 inch
26
ISDF-14-D-M
ISDF-14-D-M by Samtec is a 28-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring liquid crystal polymer insulator and crimp termination, it offers reliable connectivity. With a compact body size of 0.845" x 0.25" x 0.44", this polarized housing connector is suitable for cable mounting in various electronic devices.
.845 inch
28
LCW-103-15-L-S-300
Samtec LCW-103-15-L-S-300 is a 3-contact board connector with 0.1" pitch, suitable for commercial applications. It features matte tin finish, 10u plating thickness, and glass-filled polyester insulator material. Ideal for PCB mounting with a temperature range of -65 to 125°C.
MATING LENGTH=0.300 INCHES
.2 inch
.31 inch
.3 inch
RECEPTACLE
GOLD (10) OVER NICKEL (50)
1000VAC
5000000000 ohm
GLASS FILLED POLYESTER
-65 Cel
.23 inch
3
LCW-121-07-G-S-230
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
MATING LENGTH=0.230 INCHES
2.1 inch
Gold (Au) - with Nickel (Ni) barrier
21
LCW-128-07-G-S-230
Samtec LCW-128-07-G-S-230 is a 28-contact board connector with 0.1" pitch, gold-plated phosphor bronze contacts, and UL94V-0 rated black insulator. It operates b/w -65°C to 125°C, has 1000VAC dielectric voltage, and offers 3A signal current. Ideal for commercial applications requiring reliable connections in straight mounting configurations.
2.8 inch
LSH-040-01-H-D-A
LSH-040-01-H-D-A by Samtec is a 80-contact, 2-row board connector with gold over nickel termination. Featuring liquid crystal polymer insulator and beryllium copper contacts, it has a mating contact pitch of 0.02" and operates b/w -55°C to 125°C. Ideal for commercial applications requiring high reliability and signal currents up to 1.5A.
HEAVY GOLD PLATING
PEG
.256 inch
.07 inch
.987 inch
BERYLLIUM COPPER
0.02
5.8674
1.5 A
.5
SURFACE MOUNT
80
SSQ-108-03-L-S
SSQ-108-03-L-S by Samtec is a board connector with 8 contacts, featuring a mating contact pitch of 0.1" and rated current of 4.7A. With a durable design for 100 cycles, it is ideal for applications requiring high signal integrity and reliability in electronic systems.
TIGER BUY CONTACT
.095 inch
.82 inch
100 Cycles
.394 inch
8
SSQ-110-01-L-S
SSQ-110-01-L-S by Samtec is a 10-contact board connector with a mating contact pitch of 0.1". It features phosphor bronze contacts with gold finish, suitable for applications requiring a durable and reliable socket connection. With a temperature range from -55 to 125°C, it is ideal for various electronic devices.
1.02 inch
.104 inch
SSQ-119-02-T-S
The Samtec SSQ-119-02-T-S is a 19-contact board connector with a 0.1" pitch, ideal for commercial applications. Featuring tin-plated phosphor bronze contacts, it operates b/w -65°C to 105°C. With a rectangular PCB pattern and solder termination, it offers reliable signal transmission up to 3A.
1.92 inch
TIN
10 mohm
105
200u
UL, CSA
.19 inch
19
SSQ-123-01-L-D
The Samtec SSQ-123-01-L-D is a 2-row board connector with 46 contacts, featuring phosphor bronze contact material and gold mating finish. With a terminal pitch of 2.54mm, it is ideal for solder termination in applications requiring female connectors such as sockets on straight mounting boards.
SSQ-1
46
SSQ-123-24-F-D
The Samtec SSQ-123-24-F-D is a 2-row, 46-contact board connector with phosphor bronze contacts and gold flash mating finish. It has a terminal pitch of 2.54mm and uses solder termination for female contacts. This socket connector is ideal for board mounting applications requiring reliable connections in electronic devices.
GOLD FLASH
SSQ-128-23-G-D
SSQ-128-23-G-D by Samtec is a 2-row, 56-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1", operates b/w -65°C to 125°C, and features liquid crystal polymer insulator material. Ideal for commercial applications requiring a reliable connection with a rated signal current of 3A.
2.82 inch
20u
.39 inch
56
SSQ-131-01-L-T
Samtec SSQ-131-01-L-T is a 3-row board connector with 93 contacts, featuring phosphor bronze contact material and gold mating finish. It has a terminal pitch of 2.54mm, solder termination, and female contact gender. Ideal for applications requiring straight mounting style in headers & edge type connectors.
93
SSQ-132-01-L-T
The Samtec SSQ-132-01-L-T is a 3-row board connector with 96 contacts, featuring phosphor bronze female contacts with gold finish. It has a terminal pitch of 2.54mm and uses solder termination for secure mounting on the board. Ideal for applications requiring reliable connections in headers & edge type connectors.
96
SSQ-139-03-G-T
The Samtec SSQ-139-03-G-T is a 3-row board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1 inch and can handle up to 3A signal current. Ideal for commercial applications, this connector operates b/w -65°C to 125°C temperature range on PCBs with rectangular contact patterns.
.295 inch
3.92 inch
POLYETHYLENE
117
SSQ-140-03-F-S
The Samtec SSQ-140-03-F-S is a 40-contact female board connector with phosphor bronze contacts and gold flash finish. It features a terminal pitch of 2.54mm, solder termination, and straight mounting style. Ideal for applications requiring reliable connections in headers & edge type connectors.
40
SSW-103-01-L-S
SSW-103-01-L-S by Samtec is a 3-contact board connector with a mating contact pitch of 0.1". It features a liquid crystal polymer insulator, matte tin termination finish, and gold mating contact finish. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
.32 inch
SSW-106-01-L-D
Samtec SSW-106-01-L-D is a 2-row, 12-contact board connector with 0.1" pitch. Featuring Liquid Crystal Polymer insulator and Phosphor Bronze contacts plated with Gold over Nickel, it offers high reliability for commercial applications. With a straight socket body style and solder termination, it is ideal for PCB mounting in various electronic devices.
.62 inch
12
SSW-108-01-L-D
SSW-108-01-L-D by Samtec is a 16-contact board connector with a mating contact pitch of 0.1". It features a liquid crystal polymer insulator, phosphor bronze contact material, and matte tin termination finish. Ideal for commercial applications requiring reliable connections on PCBs with 2 rows spaced at 2.54mm apart.
SSW-108-01-L-S
SSW-108-01-L-S by Samtec is a board connector with 8 contacts, featuring phosphor bronze contact material and gold mating finish. With a temperature range of -55 to 125°C, it is ideal for commercial applications requiring a durable socket style connector with solder termination. The UL-certified header has a 2.54mm terminal pitch and black insulator color, suitable for PCB mounting in various electronic devices.
6.3 A
SSW-109-21-L-T
Samtec SSW-109-21-L-T is a 27-contact board connector with 3 rows, 0.1" pitch, and Liquid Crystal Polymer insulator. Featuring Phosphor Bronze contacts plated with Gold over Nickel, it is ideal for commercial applications requiring high reliability and UL flammability rating of 94V-0.
.92 inch
27
SSW-113-01-L-D
Samtec SSW-113-01-L-D is a 26-contact board connector with 0.1" pitch, featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel. It has a body length of 1.32" and width of 0.195", suitable for commercial applications requiring reliable connections on PCBs with rectangular contact patterns at a spacing of 2.54mm.
1.32 inch
SSW-116-01-L-S
SSW-116-01-L-S by Samtec is a 16-contact board connector with a body length of 1.62", matte tin termination, and liquid crystal polymer insulator. It operates b/w -55°C to 125°C, has gold mating contacts over nickel, and is rated for 100 cycles. Ideal for commercial applications requiring a durable, polarized socket connection with a 2.54mm terminal pitch.
1.62 inch
SSW-116-06-L-S
Samtec SSW-116-06-L-S is a 16-contact board connector with Phosphor Bronze contacts and Matte Tin finish. It features Gold mating contact finish, suitable for applications requiring a 2.54mm terminal pitch. Ideal for use in electronic devices with strict UL Flammability Code requirements.
SSW-117-21-L-D
Samtec SSW-117-21-L-D is a 2-row, 34-contact board connector with matte tin finish. Featuring liquid crystal polymer insulator, it has a temperature range of -55 to 125°C. Ideal for commercial applications, it offers durability of 100 cycles and polarization key for secure mating.
1.72 inch
34
TCMD-04-01
Samtec's TCMD-04-01 is a 2-row, 8-contact board connector with IDC/solder termination. It has a terminal pitch of 2mm and supports both board and cable mounting. Ideal for applications requiring male contact gender in straight mounting style.
BOARD AND CABLE
IDC/SOLDER
TCMD-15-01
The Samtec TCMD-15-01 is a 30-contact, dual-row board connector with gold over nickel finish. It features phosphor bronze contacts and supports IDC/solder termination. Ideal for applications requiring male connectors, it can be mounted on both boards and cables with a terminal pitch of 2mm.
TCMD
TCMD-22-01
Samtec's TCMD-22-01 is a 44-contact, dual-row board connector with phosphor bronze contacts. It supports IDC/solder termination and has a 2mm terminal pitch for straight mounting on both boards and cables. Ideal for applications requiring reliable male connectors in headers & edge type setups.
44
TMM-117-03-T-Q
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
LOW PROFILE
.315 inch
.059 inch
1.343 inch
MATTE TIN
4
3.2 A
.106 inch
68
TMM-123-02-L-D
Samtec's TMM-123-02-L-D is a 2-row board connector with 46 contacts, featuring a contact pitch of 0.079" and body length of 1.817". It uses liquid crystal polymer insulator material and has a max operating temperature of 125°C. Ideal for commercial applications requiring reliable signal transmission on PCBs.
.155 inch
1.817 inch
.118 inch
TMMH-104-01-F-T-RA
Samtec TMMH-104-01-F-T-RA is a 3-row, 12-contact board connector with a mating contact pitch of 0.079". Featuring phosphor bronze contacts with gold flash finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
.286 inch
.43 inch
GOLD FLASH OVER NICKEL (50)
2.0066
FLASH
TMMH-133-01-F-T-RA
Samtec TMMH-133-01-F-T-RA header connector has 3 rows, 99 contacts, and a mating contact pitch of 0.079". With a max operating temp of 125°C, it is ideal for commercial applications requiring a right-angle mounting style and solder termination. The connector features phosphor bronze contacts with gold flash finish over nickel for reliable signal transmission.
2.712 inch
99
TMS-128-02-L-S
Samtec's TMS-128-02-L-S header connector has a 0.05" pitch, liquid crystal polymer insulator, and gold over nickel finish. With 28 contacts, it is ideal for board-to-board connections in commercial applications requiring a temperature range of -55 to 125°C.
.196 inch
TMS
5 A
.12 inch
1.27
TMS-130-02-L-S
The Samtec TMS-130-02-L-S is a board connector with 30 contacts, featuring a mating contact pitch of 0.05", gold finish over nickel, and phosphor bronze contact material. It has a temperature range from -55 to 125°C and is ideal for commercial applications requiring a reliable connection in black insulator color.
TMS-132-01-L-S-RA
TMS-132-01-L-S-RA by Samtec is a right angle board connector with a mating contact pitch of 0.05 inches and a max operating temperature of 125°C. It is commonly used in commercial applications requiring a reliable connection for up to 5A signal current.
.14 inch
CLM-103-02-F-D-BE-A
Samtec's CLM-103-02-F-D-BE-A is a 2-row board connector with TIN over nickel termination. Featuring 6 contacts made of phosphor bronze, it has gold flash mating finish and UL94V-0 flammability rating. Ideal for surface mount applications, this female connector is designed for straight mounting on boards.
BOTTOM ENTRY, LOW PROFILE
GOLD FLASH (3)
6
CLM-103-02-F-D-BE-TR
The Samtec CLM-103-02-F-D-BE-TR is a 2-row board connector with a mating contact pitch of 0.039". It features a liquid crystal polymer insulator, gold flash mating contact finish, and phosphor bronze contact material. Ideal for applications requiring durability, it has a rated current of 1.5A and operates b/w -65°C to 125°C temperature range.
.084 inch
.135 inch
.417
0.039
3.175
.2085
CLM-103-02-F-D-BE
Samtec's CLM-103-02-F-D-BE is a 2-row board connector with 6 contacts, featuring a mating contact pitch of 0.039" and termination finish of Tin (Sn) with Nickel (Ni). With a durability of 100 cycles, it is ideal for commercial applications requiring a rated signal current of 1.5A in temperatures ranging from -65 to 125°C.
GOLD FLASH (3) OVER NICKEL (50)
© 2023 All rights reserved
