Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D-Sub connectors, also known as D-subminiature connectors, are a type of electrical connector that are commonly used in computer and telecommunications equipment. They are named for their distinctive D-shaped metal shell, which provides mechanical support and helps to shield the connectors from electromagnetic interference.D-Sub connectors are available in a range of sizes, with the most common sizes being 9-pin, 15-pin, and 25-pin. They feature a combination of male and female connectors, with the male connector featuring pins that plug into the female connector, which has sockets to receive the pins.D-Sub connectors are designed to be reliable and durable, with a locking mechanism that ensures a secure connection. They are also capable of supporting a wide range of signal types, including analog and digital signals, making them versatile connectors for a variety of applications.One common use of D-Sub connectors is in computer and telecommunications equipment, where they are used for connections such as serial ports, parallel ports, and VGA connectors. They are also used in industrial and military applications, where their robust design and ability to withstand harsh environments make them a popular choice.D-Sub connectors are available in a variety of styles, including standard, high-density, and mixed-layout connectors. They may also include features such as grounding, filtering, or EMI shielding, depending on the specific application requirements.
Add filters
All
Selected
K202XHT-E9S-NJ30
Kycon
Kycon's K202XHT-E9S-NJ30 D-Sub Connector features 2 rows, 9 contacts, gold-plated phosphor bronze contacts with 13 mohm resistance. With a dielectric voltage of 700VAC and operating temperatures from -55 to 105 °C, it is ideal for board mounting in commercial applications.
.494 inch
.194 inch
1.213 inch
RECEPTACLE
D SUBMINIATURE CONNECTOR
GOLD (30)
Gold (Au)
FEMALE
PHOSPHOR BRONZE
STAGGERED
13 mohm
RND PIN-SKT
NO
700VAC
1000000000 ohm
BLACK
POLYETHYLENE
e4
0.112
MULTIPLE MATING PARTS AVAILABLE
LOCKING
JACKSCREW
RIGHT ANGLE
BOARD
1
2
105
-55 Cel
GENERAL PURPOSE
RECTANGULAR
30u
2 A
UL
COMMERCIAL
TIN
STEEL
1/E
D Type Connectors
1.3716
SURFACE MOUNT
9
K202XHT-E9S-NJ
K202XHT-E9S-NJ by Kycon is a D-Sub connector with 9 contacts, gold flash termination, and 700VAC dielectric voltage. Ideal for board mounting applications in commercial settings, it offers a temperature range of -55 to 105°C and high insulation resistance of 1Gohm. With a compact body size of 1.213" x 0.494" x 0.194", this connector ensures reliable signal transmission at up to 2A current rating.
NOT SPECIFIED
Gold Flash (Au)
FLASH
K31X-A15S-NJ
Kycon's K31X-A15S-NJ D-Sub Connector features 15 contacts, gold flash finish, and polyethylene insulator. With a dielectric voltage of 1000VAC, it operates b/w -55 to 105°C. Ideal for board mounting applications requiring high insulation resistance and signal current up to 2A.
ROHS COMPLIANT
.157 inch
1.541 inch
GOLD FLASH OVER NICKEL
1000VAC
#4-40
.7874
2/A
.087 inch
2.7686
SOLDER
15
K61X-E15S-NJ
K61X-E15S-NJ by Kycon is a D-Sub connector with 15 contacts, rated at 2A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 1Gohm, suitable for PCB mounting applications. With a temperature range from -55 to 105°C, it offers reliable performance in various commercial electronic systems.
.35 inch
POLYBUTYLENE TEREPHTHALATE
0.078
3
1.9558
UL, CSA
.125 inch
2.286
K61X-E15S-NVESA
K61X-E15S-NVESA D-Sub Connector by Kycon features 15 contacts, gold flash finish, and polybutylene terephthalate insulator. With a dielectric voltage of 1000VAC, it is ideal for commercial applications requiring a reliable signal current of 2A. This right-angle receptacle has a temperature range from -55 to 105°C, making it suitable for various board mounting configurations.
GOLD FLASH
K61X
THREADED INSERT
D09S24A6RV12LF
Amphenol Communications Solutions
D09S24A6RV12LF by Amphenol is a 9-contact D-sub connector with female contact gender, suitable for board mounting via solder termination. Its shell size is 1/E. Ideal for applications requiring reliable and secure connections in electronic devices.
D25S24A6RL12LF
D25S24A6RL12LF by Amphenol is a 25-contact D-Sub connector with 2 rows, rated for 5A signal current. Featuring polyethylene insulation and nickel shell finish, it operates b/w -55°C to 125°C. Ideal for board and panel mounting applications due to its staggered PCB contact pattern and female contact gender.
STANDARD: DIN 41652
SPLIT BOARD LOCK
.236 inch
2.07 inch
5000000000 ohm
0.109
M3
STRAIGHT
BOARD AND PANEL
ONE
125
2.84
5 A
NICKEL
3/B
2.76
25
94V-0
D25S24A6RX12LF
D25S24A6RX12LF by Amphenol is a 25-contact D-Sub connector with 2 rows, ideal for board and panel mounting. Featuring a body length of 2.07" and insulation resistance of 5G ohm, it operates b/w -55°C to 125°C. With a shell made of steel and nickel finish, it's suitable for applications requiring reliable signal connections at up to 5A current rating.
NOT APPLICABLE
DCO8W8S543H30LF
DCO8W8S543H30LF by Amphenol is a D-Sub connector with 8 contacts, POLYETHYLENE insulator, and STEEL shell. It features FEMALE contact gender, SOLDER termination, and BOARD mounting type. Ideal for applications requiring reliable data transmission in industrial equipment and communication systems.
4/C
8
DAO3V3P500H30LF
DAO3V3P500H30LF by Amphenol is a D-Sub Connector with 3 contacts, rated at 7.3A signal current. It features bright tin over nickel termination, polyethylene insulator, and copper nickel tin shell finish. Ideal for board and panel mounting in commercial applications requiring high insulation resistance of 5Gohm.
S0P3
BRIGHT TIN OVER NICKEL
MALE
7.3 mohm
e3
YES
7.3 A
COPPER NICKEL TIN
DBO13W3P700G30LF
DBO13W3P700G30LF by Amphenol is a D-Sub connector with 13 contacts, rated at 7.5A signal current. It features pure bright tin over nickel termination finish and polyethylene insulator material. Ideal for board mounting applications requiring high insulation resistance of 5000000000 ohm.
S10P3
PURE BRIGHT TIN OVER NICKEL
THREADED
7.5 A
13
DCL8W8P500G40LF
DCL8W8P500G40LF by Amphenol Communications Solutions is a D-Sub connector with 8 contacts and a shell size of 4/C. It has an insulation resistance of 5 Gohm, mixed contacts, and a contact material of brass. This connector is commonly used in board and panel mounting applications.
S0P8
TIN OVER NICKEL
Bright Tin (Sn) - with Nickel (Ni) barrier
BRASS
D
D09P24A6RL09LF
The Amphenol D09P24A6RL09LF is a 9-contact D-SUB connector with male gender, suitable for board mounting via solder termination. Featuring shell size 1/E, it is ideal for applications requiring reliable data transmission in industrial and telecommunications equipment.
D15S24A6RV09LF
D15S24A6RV09LF by Amphenol is a 15-contact D-sub connector with polyethylene insulator, nickel shell finish, and steel shell material. It is ideal for board and panel mounting applications requiring a female socket contact gender. This UL 94V-0 rated connector offers reliable solder termination in various electronic devices.
SOCKET
D25P24A6RV09LF
D25P24A6RV09LF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a body length of 2.07", insulation resistance of 5000000000 ohm, and operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable male contact pins in staggered patterns.
SCREWLOCKS
D25S24A6RL09LF
D25S24A6RL09LF by Amphenol is a 25-contact D-Sub connector with 2 rows, rated for 5A signal current. Featuring polyethylene insulation and nickel shell finish, it operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable female socket contacts in a compact steel shell design.
D25S24A6RV09LF
D25S24A6RV09LF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a body length of 2.07", insulation resistance of 5000000000 ohm, and shell material made of steel. Ideal for applications requiring reliable board and panel mounting in environments ranging from -55°C to 125°C.
D25S24A6RX09LF
Amphenol D25S24A6RX09LF is a 25-contact D-Sub connector with 2 rows, ideal for board and panel mounting. Featuring polyethylene insulation, it offers high insulation resistance of 5 Gohm. With a rated current of 5A, this female socket connector has a shell made of steel and operates b/w -55°C to 125°C.
D37P24A6RL09LF
The Amphenol D37P24A6RL09LF is a D-sub connector with 37 contacts, nickel shell finish, and polyethylene insulator. Ideal for board mounting applications, it features male contact gender and steel shell material. UL 94V-0 flammability code ensures safety in various electronic devices.
37
D50P24A6RL09LF
D50P24A6RL09LF by Amphenol is a 50-contact D-sub connector with nickel finish and polyethylene insulator. It features male contacts, steel shell material, and solder termination. Ideal for board mounting applications requiring a compact 5/D shell size with UL 94V-0 flammability rating.
5/D
50
D50P24A6RV09LF
D50P24A6RV09LF by Amphenol is a 50-contact D-sub connector with nickel finish and polyethylene insulator. It features male contact gender, solder termination, and steel shell material. Ideal for board mounting applications requiring a reliable UL 94V-0 flammability code compliant connector.
D50S24A6RV09LF
D50S24A6RV09LF by Amphenol is a 50-contact D-sub connector with nickel finish, polyethylene insulator, and steel shell. It is ideal for board and panel mounting applications requiring reliable solder termination. This female socket connector with UL 94V-0 flammability code is designed for use in various electronic devices.
DB5W5SA00LF
DB5W5SA00LF by Amphenol is a D-Sub Connector with 5 contacts, made of steel shell material and polyethylene insulator. It has a body length of 2.073" and width of 0.494", operating temperature range from -55 to 125°C. Ideal for commercial applications requiring high insulation resistance up to 5000000000 ohm.
2.073 inch
PLUG
S0P5
COPPER TIN
5
DBO9W4S500G40LF
DBO9W4S500G40LF by Amphenol is a D-Sub connector with 9 contacts, pure tin termination, and copper nickel tin shell finish. It features mixed contacts and polyethylene insulator material. Ideal for board mounting applications requiring a female socket connector with UL 94V-0 flammability rating.
Pure Tin (Sn) - with Nickel (Ni) barrier
DC8W8SA00LF
DC8W8SA00LF by Amphenol is a D-Sub connector with 8 contacts, made of steel shell and polyethylene insulator. It has a temperature range of -55 to 125°C, UL94V-0 flammability rating. Ideal for applications requiring reliable female connectors in harsh environments.
DAP15S065TLF
DAP15S065TLF by Amphenol is a 15-contact D-sub connector with polyethylene insulator, tin/zinc chromium finish, and steel shell. It is ideal for board mounting applications requiring a female contact gender. This UL 94V-0 rated connector offers reliable solder termination in a compact 2/A shell size.
TIN/ZINC CHROMIUM
5745410-1
TE Connectivity
TE Connectivity's 5745410-1 D-Sub Connector features 2 rows, tin finish with nickel barrier contacts, and polyethylene insulator. With a temperature range of -55 to 105°C, it is ideal for board mounting applications requiring a male plug with round pin sockets. Rated at 6A signal current, UL certified for safety.
PREASSEM CONN
Tin (Sn) - with Nickel (Ni) barrier
6A
6 A
CARBON STEEL
2.77
5747375-2
TE Connectivity 5747375-2 D-Sub Connector features 37 contacts, 0.109" pitch, and 1000000000 ohm insulation resistance. Ideal for board mounting applications with a temperature range of -55 to 105 °C, UL-rated for reliability in commercial settings.
AMPLIMITE
2.732 inch
20 mohm
POLYESTER
HOLE .112-.124
2.8448
865637PLTXLF
Amphenol's 865637PLTXLF D-Sub Connector features 37 contacts, 5A power rating, and 1414VAC dielectric voltage. Ideal for cable and panel mounting applications with a temperature range of -55 to 125°C. Contact design includes round pin sockets with crimp termination for durability up to 200 cycles.
.479 inch
.453 inch
2.714 inch
STRIP OR LOOSE
10 mohm
1414VAC
200 Cycles
CABLE AND PANEL
CRIMP
20 AWG
28 AWG
DA15P064HTXLF
DA15P064HTXLF by Amphenol is a D-sub connector with 15 contacts, made of steel shell material and terminated with matte tin finish. It is commonly used in cable and panel mounting applications, providing reliable connectivity with its solder termination type.
Matte Tin (Sn) - with Nickel (Ni) barrier
DA15P364TXLF
DA15P364TXLF by Amphenol is a D-Sub connector with 15 contacts, tin finish, and polyethylene insulator. It is a male solder type connector suitable for board and panel mounting applications. The shell material is steel with UL94V-0 flammability rating, making it ideal for various electronic devices.
DA15S065TLF
The Amphenol DA15S065TLF is a D-Sub connector with 15 contacts, featuring matte tin finish and polyethylene insulator. It is a female solder type connector suitable for cable and panel mounting applications. The shell material is steel with TIN/ZINC CHROMIUM finish, meeting UL Flammability Code 94V-0 standards.
DA15S364TLF
The Amphenol DA15S364TLF D-Sub Connector features 15 contacts, female gender, and polyethylene insulator material. With tin finish and nickel barrier, it is ideal for board and panel mounting applications requiring a reliable solder termination solution. The connector's steel shell construction ensures durability while meeting UL 94V-0 flammability standards.
DAO15S065TLF
Amphenol's DAO15S065TLF D-Sub Connector features 15 contacts, matte tin finish with nickel barrier, and polyethylene insulator. Ideal for cable and panel mounting applications, this female connector has a steel shell with tin/zinc chromium finish. Compliant with UL 94V-0 flammability code, it offers reliable solder termination.
DAP15P465TXLF
DAP15P465TXLF by Amphenol is a D-Sub connector with 15 contacts, gold termination finish, and polyethylene insulator. It features a tin/zinc chromium shell finish, male contact gender, and wire wrap termination type. Ideal for board and panel mounting applications due to its steel shell material and UL 94V-0 flammability code.
Gold (Au) - with Nickel (Ni) barrier
WIRE WRAP
DB25P064HTXLF
DB25P064HTXLF by Amphenol is a D-Sub Connector with 25 contacts, rated for 5A signal current. Featuring a shell size of 3/B and male contact gender, it has a mating contact pitch of 0.109" and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications due to its locking option and solder termination type.
.185 inch
HOLE .122
DB25S064HTLF
DB25S064HTLF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a mating contact pitch of 0.109", matte tin finish, and polyethylene insulator material. Ideal for applications requiring a temperature range from -55°C to 125°C, it is commonly used in cable and panel mounting setups for reliable connectivity.
DB25S364TLF
DB25S364TLF by Amphenol is a D-Sub connector with 25 contacts, rated at 7.5A signal current. It features a body length of 2.07", insulation resistance of 5Gohm, and operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable female contact connections in a compact steel shell design.
.165 inch
DB25S565CTLF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.76; No. of PCB Rows: 2;
.51 inch
GOLD OVER NICKEL/GOLD FLASH OVER PALLADIUM NICKEL
COPPER ALLOY
25 mohm
2.54
DBP25S465TLF
DBP25S465TLF by Amphenol is a D-Sub connector with 25 contacts, rated at 7.5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
.226 inch
GOLD OVER NICKEL
1400VAC
HOLE .12
.5 inch
DC37P064HTXLF
DC37P064HTXLF by Amphenol Communications Solutions is a D-Sub connector with 37 contacts. It has a matte tin finish with nickel barrier and is made of polyethylene insulator material. This connector is suitable for use in cable and panel mounting applications.
DC37P064TXLF
DC37P064TXLF by Amphenol is a D-Sub Connector with 37 contacts, rated for 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications, it has a temperature range from -55 to 125°C and uses solder termination on steel shell material.
.23 inch
MATTE TIN OVER NICKEL
NATURAL
79u
.106 inch
DC37S064TLF
DC37S064TLF by Amphenol is a D-Sub Connector with 37 contacts, rated for 5A signal current. Featuring a dielectric voltage of 1400VAC, it has an insulation resistance of 5000000000 ohm. Ideal for commercial applications, this connector operates b/w -55 to 125°C and uses solder termination on steel shell material.
.238 inch
DD50P064TXLF
DD50P064TXLF by Amphenol is a D-Sub Connector with 50 contacts, rated for 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
.59 inch
2.62 inch
DD50P364TXLF
Amphenol DD50P364TXLF D-Sub Connector features 50 contacts, Tin finish with Nickel barrier, and Polyethylene insulator. Ideal for board and panel mounting applications requiring a male connector with solder termination. Shell made of steel with UL 94V-0 flammability rating.
DD50P564TXLF
DD50P564TXLF by Amphenol is a D-Sub Connector with 50 contacts, rated at 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
.605 inch
.609 inch
2.635 inch
0.056
DD50S064TLF
DD50S064TLF by Amphenol is a D-Sub Connector with 50 contacts, 5A signal rating, and 1400VAC dielectric voltage. It features a polyethylene insulator, matte tin over nickel finish, and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable cable or panel mounting with a locking option.
DD50S564TLF
DD50S564TLF by Amphenol is a D-Sub connector with 50 contacts, featuring tin finish with nickel barrier. Its insulator material is polyethylene, and it has a steel shell with UL 94V-0 flammability rating. Ideal for board mounting applications, this female connector uses solder termination and belongs to the 5/D shell size category.
© 2023 All rights reserved
