Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
3549-2002
3m Electronic Products Division
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.085", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. With a total of 24 contacts, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -55 to 105°C.
ROHS COMPLIANT
.81 inch
.5 inch
2.169 inch
PLUG
PREASSEM CONN
NOT SPECIFIED
FEMALE
RECTANGULAR
CENTRONIC
1400VAC
1000000000 ohm
GRAY
0.085
#4-40
LOCKING
CABLE
2
105
-55 Cel
GENERAL PURPOSE
30u
1 A
UL
COMMERCIAL
NICKEL
STEEL
D Type Connectors
WIRE
24
26 AWG
28 AWG
3565-1002
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.085", insulation resistance of 1G ohm, and dielectric voltage rating of 1400VAC. Ideal for commercial applications, this connector has a body length of 3.272", operates b/w -55 to +105 °C, and accommodates up to 50 contacts with wire termination.
.598 inch
3.272 inch
50
N10226-52B3PC
N10226-52B3PC by 3M Electronic Products Division is a D-Sub Connector with 26 contacts, gold termination finish, and UL flammability rating. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels in tight spaces.
3M, SHIELDED
.37 inch
.45 inch
1.46 inch
RECEPTACLE
OTHER D TYPE CONNECTOR
Gold (Au) - with Nickel (Ni) barrier
NO
500VAC
500000000 ohm
BEIGE
GLASS FILLED POLYESTER
e4
0.05
M2.5
THREADED
RIGHT ANGLE
BOARD AND PANEL
4
STAGGERED
1.905
ZINC ALLOY
.11 inch
2.54
SOLDER
26
94V-0
8225-8009
8225-8009 D-Sub Connector by 3M EPD features a body length of 2.09", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications, it has a contact gender of male, shell material of steel, and termination type of crimp.
.49 inch
.41 inch
2.09 inch
D SUBMINIATURE CONNECTOR
MALE
COPPER ALLOY
RND PIN-SKT
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
0.109
0.11
RIVET
ONE
TIN
3/B
CRIMP
25
N10214-52B2PC
N10214-52B2PC by 3M is a D-Sub Connector with 14 contacts, gold mating finish, and UL-rated. It has a body length of 1.16", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting in commercial applications requiring high reliability.
3M
1.16 inch
GOLD (30) OVER NICKEL (80)
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
GLASS FILLED PCT
.15 inch
14
N10236-52B2PC
N10236-52B2PC by 3m Electronic Products Division is a D-Sub Connector with a mating contact pitch of 0.05 inches, body length of 1.71 inches, and insulation resistance of 500MΩ. It is commonly used in board and panel mounting applications for its right angle mounting style and female contact gender.
1.71 inch
36
N10250-52G3PC
N10250-52G3PC by 3M Electronic Products Division is a D-Sub Connector with 50 contacts, gold-plated copper alloy material, and UL flammability rating of 94V-0. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting applications requiring high reliability in commercial settings.
2.06 inch
10114-3000PE
The 3m Electronic Products Division D-Sub Connector (10114-3000PE) features a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this connector has a Body Length of 0.717" and is designed with GOLD OVER NICKEL Termination Contact Finish for reliability in temperatures ranging from -55 to 105°C.
3M, SHROUDED
.358 inch
.717 inch
GOLD (20) OVER NICKEL (80)
GOLD OVER NICKEL
700VAC
100000000 ohm
BLACK
0.091
20u
24 AWG
30 AWG
10126-5212PC
10126-5212PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for board and panel mounting applications, this connector features gold flash over nickel termination contact finish and is suitable for commercial use in various electronic devices.
3M, PANEL MOUNTABLE
.382 inch
.461 inch
1.465 inch
GOLD FLASH OVER NICKEL (80)
SCREWLOCKS
85
-20 Cel
2/A
10136-3000PC
10136-3000PC by 3M Electronic Products Division is a D-Sub Connector with 36 contacts, gold/nickel finish, and glass-filled polyester insulator. It has a mating contact pitch of 0.05", insulation resistance of 100M ohm, and can operate b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission in a compact form factor.
1.268 inch
10140-3000PE
10140-3000PE D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.05", Insulation Resistance of 100M ohm, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this connector has a body length of 1.366" and termination contact finish in Gold over Nickel, suitable for signal currents up to 1A with a temperature range from -55°C to +105°C.
1.366 inch
101
40
10150-3000PE
10150-3000PE D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this connector has a body length of 1.618" and is designed with GOLD OVER NICKEL termination contact finish for reliability in temperatures ranging from -55 to +105°C.
1.618 inch
5/D
10214-1210PE
10214-1210PE by 3M Electronic Products Division is a D-Sub Connector with a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 700VAC. Ideal for board and panel mounting applications, this connector features gold over nickel termination finish and operates b/w -55°C to 105°C temperature range.
.368 inch
.394 inch
102
1
.635
SURFACE MOUNT
10214-R21TS
OTHER D TYPE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; PCB Contact Row Spacing (mm): 1.905;
.36 inch
.23 inch
GOLD FLASH OVER NICKEL
POLYBUTYLENE TEREPHTHALATE
.16 inch
PRESS FIT
10220-55G3PC
10220-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. It is used in applications requiring a reliable, right-angle mounting solution for PCB connections in commercial environments.
1.31 inch
GOLD (30) OVER NICKEL (100)
20
10226-2200PE
10226-2200PE by 3M Electronic Products Division is a D-Sub Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for board mounting applications in commercial settings due to its high reliability, gold-plated contacts, and surface mount termination type.
3M, LATCHED, PANEL MOUNTABLE, SHROUDED
PCT-POLYESTER
MOUNTING FLANGE
STRAIGHT
BOARD
6.8072
1.27
10226-2210PE
10226-2210PE by 3M is a D-Sub Connector with 26 contacts, gold-plated copper alloy, and PCT-POLYESTER insulator. It has a mating contact pitch of 0.05", withstands up to 700VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its high insulation resistance and UL certification.
10226-55G3PL
The 3m Electronic Products Division D-Sub Connector 10226-55G3PL features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a female contact gender with gold flash over nickel finish for reliable signal transmission in commercial settings at temperatures ranging from -55 to 105°C.
GOLD (8) OVER NICKEL (50)
8u
10226-R21TS
10226-R21TS D-Sub Connector by 3M EPD features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a total of 26 contacts, gold flash termination finish, and operates b/w -20°C to 85°C temperature range.
Gold Flash (Au) - with Nickel (Ni) barrier
10236-55G3PC
10236-55G3PC by 3M is a D-Sub Connector with 36 contacts, rated for 1A signal current. It features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting applications requiring reliable female connectors with gold-nickel finish.
10236-55H3PC
10236-55H3PC by 3M is a D-Sub Connector with 36 contacts, gold/nickel finish, and glass-filled PCT shell. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission.
10240-1210PE
10240-1210PE D-Sub Connector by 3M EPD features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 700VAC. Ideal for board and panel mounting applications, this connector has a female contact gender, gold-plated contacts, and operates in temperatures ranging from -55°C to 105°C.
COMPLIANT BOARDLOCK & PEGS
1.85 inch
10240-55G3PC
10240-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. Ideal for commercial applications requiring a reliable right-angle receptacle connector with female contact gender and solder termination on board or panel mounting.
1.81 inch
10250-55H3PC
The 3m Electronic Products Division D-Sub Connector 10250-55H3PC features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for board and panel mounting applications, this connector has gold flash over nickel termination finish for reliable signal transmission in commercial settings.
10268-55H3PC
The 3M Electronic Products Division's 10268-55H3PC D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this connector has a total of 68 contacts, with a right-angle receptacle design suitable for board and panel mounting.
2.51 inch
68
10220-6212PC
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 707VAC. Ideal for board and panel mounting applications, this connector has a total of 20 contacts, gold-plated copper alloy contacts, and UL flammability rating of 94V-0.
BELLOWED TYPE
707VAC
JACKSCREW
1.9
.134 inch
10280-6212PC
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage withstand of 700VAC. Ideal for board and panel mounting applications, this connector has a total of 80 contacts, gold-plated finish, and UL flammability rating of 94V-0.
.228 inch
2.81 inch
SQ PIN-SKT
80
12226-8250-00FR
3m Electronic Products Division's 12226-8250-00FR D-Sub Connector features 26 contacts, gold-plated with nickel barrier. With a mating contact pitch of 0.031", it has an insulation resistance of 500MΩ and can withstand up to 350VAC. Ideal for board and panel mounting applications, this connector operates b/w -40°C to +70°C temperatures.
EMI SHIELDED
.2 inch
.42 inch
1.12 inch
350VAC
LIQUID CRYSTAL POLYMER
0.031
70
-40 Cel
.5 A
0.8
12226-8250-00PL
3M Electronic Products Division's 12226-8250-00PL D-Sub Connector features GOLD OVER NICKEL termination, LIQUID CRYSTAL POLYMER insulator, and 26 contacts. Ideal for surface mount applications in electronics requiring a reliable FEMALE connector with 94V-0 flammability rating.
10236-55G3PL
The 3m Electronic Products Division D-Sub Connector features a Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. Ideal for board and panel mounting applications with a max operating temperature of 105°C.
10268-M218PE
10268-M218PE D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for board and panel mounting applications requiring reliable signal transmission in commercial settings.
.969 inch
.811 inch
2.917 inch
4+4
2+2
.13 inch
12214-5150-00FR
3m Electronic Products Division's 12214-5150-00FR D-Sub Connector features 500M ohm Insulation Resistance, Gold (Au) - Ni Termination Contact Finish, and 350VAC Dielectric Withstanding Voltage. Ideal for board and panel mounting applications with a total of 14 contacts, this connector has a temperature range from -40 to 70°C.
.197 inch
.376 inch
.79 inch
POLYAMIDE
0.016
0.03
1.143
.09 inch
1.5748
8215-6009
8215-6009 by 3M Electronic Products Division is a D-sub connector with GLASS FILLED PBT/PET insulator, operating from -55 to 105°C. Featuring COPPER ALLOY contacts with GOLD/NICKEL finish, it has 15 contacts and a TIN shell. Ideal for male crimp termination in cable and panel mounting applications.
3M, LOW PROFILE
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER
CABLE AND PANEL
15
8250-6005
8250-6005 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.108", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1400VAC. Ideal for commercial applications, this male connector has a total of 50 contacts, gold termination finish, and operates b/w -55 to +105°C.
3M, EMI/ESD PROTECTION
.6 inch
.236 inch
2.79 inch
0.108
0.112
3
IDC
8309-6009
8309-6009 D-Sub Connector by 3M has a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1400VAC. Ideal for commercial applications, it features a female contact gender, socket body style, and IDC termination type for reliable signal transmission in temperatures ranging from -55 to 105°C.
.25 inch
1.23 inch
SOCKET
1/E
9
8325-6009
8325-6009 D-Sub Connector by 3M EPD features a mating contact pitch of 0.109", insulation resistance of 1G ohm, and dielectric voltage rating of 1400VAC. Ideal for commercial applications, this connector has a body length of 2.09" and is designed with a socket shell style for female contacts in cable and panel mounting configurations.
8350-6005
8350-6005 D-Sub Connector by 3M features a Mating Contact Pitch of 0.108", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1400VAC. Ideal for commercial applications, this connector has a total of 50 contacts, gold termination finish, and operates b/w -55 to 105°C.
2.77 inch
N10220-6212PC
N10220-6212PC by 3M Electronic Products Division is a D-Sub Connector with 20 contacts, gold flash termination, and 700VAC dielectric voltage. It is used in commercial applications, has a temperature range of -20 to 85°C, and features a female contact gender for board and panel mounting.
POLYCYCLOHEXYLENE TEREPHTHALATE
N10250-6212PC
N10250-6212PC by 3M is a D-Sub Connector with 50 contacts, rated at 1A signal current. It features gold flash termination finish, glass-filled PCT shell material, and UL flammability rating of 94V-0. Ideal for board and panel mounting applications in commercial settings due to its high insulation resistance of 500MΩ and dielectric voltage withstand of 700VAC.
N10280-6212PC
N10280-6212PC by 3M is a D-Sub Connector with 80 contacts, rated at 1A signal current. It features gold flash over nickel termination finish and operates b/w -20°C to 85°C. Ideal for board and panel mounting applications requiring reliable signal connections in commercial settings.
8209-6000
8209-6000 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for commercial applications, it has a Body Length of 1.22" and is designed with GLASS FILLED PBT/PET insulator material for reliability in temperatures ranging from -55 to +105°C.
1.22 inch
1000VAC
HOLE .112-.124
8209-6003
8209-6003 D-Sub Connector by 3M features a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for commercial applications, this connector has a Body Length of 1.22" and is designed with a Shell Material made of steel for durability in various environments.
8215-6000
8215-6000 D-Sub Connector by 3M EPD features a mating contact pitch of 0.109", insulation resistance of 1G ohm, and dielectric voltage rating of 1000VAC. Ideal for commercial applications, this connector has a body length of 1.54" and is designed with gold-plated copper alloy contacts for reliable signal transmission in temperatures ranging from -55 to 105°C.
1.54 inch
8309-6000
8309-6000 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for commercial applications, this connector has a Body Length of 1.23" and is designed with GLASS FILLED PBT insulator material for reliability in temperatures ranging from -55 to +105°C.
8315-6003
8315-6003 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.109", Insulation Resistance of 1x10^9 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for commercial applications, this connector has a Body Length of 1.54" and is designed with a Socket Body Style for female contacts in cable and panel mounting configurations.
8325-7003
8325-7003 D-Sub Connector by 3M EPD features a mating contact pitch of 0.109", insulation resistance of 1G ohm, and dielectric voltage withstand of 1000VAC. Ideal for commercial applications, it has a body length of 2.09" and operates b/w -55°C to 105°C, with a total of 25 contacts for signal currents up to 1A.
8337-6000
8337-6000 by 3M Electronic Products Division is a D-Sub Connector with 37 contacts, rated for 1A signal current. Featuring gold over nickel mating contact finish, it has a body length of 2.73", width of 0.49", and depth of 0.25". Ideal for commercial applications, it operates b/w -55°C to 105°C and offers high insulation resistance at 1000000000 ohm.
2.73 inch
4/C
37
8337-6003
8337-6003 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for commercial applications, it has a contact design of Preassem Conn and can operate b/w -55 to 105°C, with UL Flammability Code rating of 94V-0.
NOT APPLICABLE
© 2023 All rights reserved
