Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
5748526-1
TE Connectivity
TE Connectivity D-Sub Connector 5748526-1 with 9 contacts, 0.109" pitch, and EMI shielding is ideal for applications requiring a male plug with wire termination. Operating b/w -55°C to 105°C, it features a steel shell, UL insulation material, and tin finish for high performance in various environments.
.509 inch
1.575 inch
1.228 inch
PLUG
D SUBMINIATURE CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
MALE
STAGGERED
15 mohm
RND PIN-SKT
NO
YES
.165 inch
500000000 ohm
BLACK
GLASS FILLED POLYAMIDE
115/230VAC
0.109
0.112
#4-40 UNC
CLINCH NUT
STRAIGHT
CABLE
ONE
1
2
105
-55 Cel
GENERAL PURPOSE
UL
TIN
STEEL
1/E
2.74
WIRE
9
94V-0
5748634-1
TE Connectivity's 5748634-1 D-Sub Connector features EMI shielding, polyethylene insulator, and a max operating temperature of 105°C. Ideal for applications requiring a receptacle connector with 15 contacts, UL flammability rating of 94V-0, and steel shell material.
RECEPTACLE
POLYETHYLENE
2.28
15
5748642-1
TE Connectivity 5748642-1 D-Sub Connector features 0.095" mating contact pitch, 500M ohm insulation resistance, and EMI shielding. Ideal for applications requiring a female connector with 62 contacts, crimp termination, and steel shell material.
.6 inch
2.01 inch
2.865 inch
FEMALE
.338 inch
0.095
LOCKING
JACKSCREW
3
4/C
2.41
CRIMP
62
747516-7
TE Connectivity 747516-7 D-Sub Connector with EMI shielding, polyethylene insulator, and tin plating. Rated for 5A signal current, suitable for commercial applications requiring reliable cable termination in a temperature range of -55 to 105°C.
DISCRETE, ROUND
TIN OVER NICKEL
.455 inch
5A
30u
5 A
COMMERCIAL
D Type Connectors
1.38
IDC
22 AWG
26 AWG
749805-7
TE Connectivity 749805-7 D-Sub Connector features EMI shielding, Tin (Sn) termination with Nickel (Ni) barrier, and Glass Filled Polyamide/Polyester insulator. Ideal for commercial applications, this connector has a max operating temperature of 105°C and min of -55°C.
Tin (Sn) - with Nickel (Ni) barrier
.185 inch
GLASS FILLED POLYAMIDE/POLYESTER
e3
FLASH
20 AWG
24 AWG
749805-8
TE Connectivity's 749805-8 D-Sub Connector is EMI shielded with TIN over NICKEL finish. It has 15 contacts, UL94V-0 rated insulator in BLACK color, and operates b/w -55 to 105°C. Ideal for commercial applications, it features CRIMP termination and PLUG body style for cable mounting.
2/A
749805-9
TE Connectivity 749805-9 D-Sub Connector with EMI shielding, TIN over nickel termination, and glass-filled insulator. Operating temp -55 to 105°C. Ideal for commercial applications requiring a reliable male plug connector with 25 contacts and crimp termination on 20-24 AWG wires.
3/B
25
749806-7
TE Connectivity 749806-7 D-Sub Connector features EMI shielding, TIN over nickel termination, and glass-filled polyamide/polyester insulator. Ideal for commercial applications with 9 contacts, crimp termination, and a temperature range of -55 to 105°C.
749806-9
TE Connectivity's 749806-9 is a D-Sub Connector with a mating contact pitch of 0.109 inch and body length of 2.103 inch. It is EMI shielded and has a max operating temperature of 105°C. This connector is commonly used in applications requiring reliable electrical connections, such as in industrial machinery or computer systems.
.424 inch
2.103 inch
HOLE .12
749809-9
The TE Connectivity 749809-9 D-Sub Connector features 25 contacts, UL 94V-0 flammability rating, and a max operating temperature of 105°C. Ideal for applications requiring a male contact gender, straight mounting style, and IDC termination type.
ROUND
.18 inch
2.4 A
2.77
C115371-5004
C & K Components
C115371-5004 by C & K Components is a D-Sub Connector with 15 contacts, rated at 7.5A signal current. Featuring gold shell finish and male contact gender, it operates b/w -55 to 125°C. Ideal for cable mounting applications due to its solder termination and staggered contact pattern.
PREASSEM CONN
5 mohm
5000000000 ohm
0.108
MULTIPLE MATING PARTS AVAILABLE
125
7.5 A
GOLD
.094 inch
SOLDER
189-015-613R571
Norcomp Interconnect Devices
Norcomp Interconnect Devices' 189-015-613R571 is a D-Sub Connector with a mating contact pitch of 0.11", body length of 1.535", and insulation resistance of 1000 ohm. It is commonly used in board mounting applications, offering a right angle mounting style and male-male contact gender.
OTHER STACKING CONNECTOR: 15 CONTACTS; 2/A SHELL SIZE
SPLIT BOARD LOCK
1.15 inch
.772 inch
1.535 inch
GOLD FLASH
MALE-MALE
BRASS
1400VAC
1000 ohm
POLYAMIDE9T
e4
0.11
.112/.15
#4-40
STANDOFF
RIGHT ANGLE
BOARD
TWO
2+2
2.84/3.91
NICKEL
2/A; 2/A
.125 inch
15+15
189-025-413R571
Norcomp Interconnect Devices' 189-025-413R571 D-Sub Connector features 25+25 contacts, gold flash mating contact finish, and polyamide9T insulator material. With a rated current of 5A, it is ideal for board mounting applications in electronics requiring reliable signal transmission at temperatures ranging from -55 to 105°C.
OTHER STACKING CONNECTOR: 25 CONTACTS; 3/B SHELL SIZE
2.087 inch
MALE-FEMALE
3/B; 3/B
25+25
623-009-661-033
Edac
Edac's 623-009-661-033 D-Sub Connector features TIN termination, POLYETHYLENE/POLYESTER insulator, and NICKEL shell finish. Ideal for board mounting applications, this male connector with 9 contacts has a GOLD mating finish over nickel and UL94V-0 flammability rating.
SHIELDED, POLARIZED
GOLD (30) OVER NICKEL
BRASS/PHOSPHOR BRONZE
POLYETHYLENE/POLYESTER
624-009-661-033
Edac 624-009-661-033 D-Sub Connector features 9 contacts with TIN finish, GOLD mating contact finish over NICKEL, and POLYETHYLENE/POLYESTER insulator. Ideal for board mounting applications requiring FEMALE connectors with RECEPTACLE shell style.
624-025-661-033
Edac's 624-025-661-033 D-Sub Connector features 25 contacts with TIN finish, POLYETHYLENE/POLYESTER insulator, and NICKEL shell. Ideal for board mounting applications, this FEMALE connector has BRASS/PHOSPHOR BRONZE contacts and GOLD mating finish over NICKEL.
171-015-203L021
Norcomp Interconnect Devices' 171-015-203L021 D-Sub Connector features gold flash termination, 5A power rating, and 100M ohm insulation resistance. Ideal for cable mounting applications with a temperature range of -50 to 100°C, this connector has a durable steel shell and UL certification.
.496 inch
1.061 inch
1.541 inch
STAMPED
Gold Flash (Au)
150 Cycles
1000000000 ohm
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
100
-50 Cel
28 AWG
171-037-103L001
The Norcomp D-Sub Connector 171-037-103L001 features Gold Flash termination, Glass Filled Polybutylene Terephthalate/Nylon66 insulator, and Nickel shell finish. With 37 contacts, male gender, and solder termination, it is ideal for cable mounting applications in various industries.
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/NYLON66
37
171-015-203L031
Norcomp Interconnect Devices' 171-015-203L031 D-Sub Connector features gold flash termination, 5A power rating, and 100M ohm insulation resistance. Ideal for cable mounting applications with a temperature range of -50 to 100°C.
380-025-113L001
Norcomp Interconnect Devices' 380-025-113L001 is a D-sub connector with a mating contact pitch of 0.05 inch. It has a body length of 1.169 inch and insulation resistance of 1G ohm. This connector is commonly used in applications requiring reliable signal transmission and can withstand temperatures from -55 to 85°C.
.289 inch
.212 inch
1.169 inch
D MICROMINIATURE CONNECTOR
45 mohm
500VAC
POLYBUTYLENE TEREPHTHALATE
0.05
0.043
HOLE 0.11
85
1.1
15u
1 A
ZINC ALLOY
D
.118 inch
1.27
180-M26-103L001
180-M26-103L001 D-Sub Connector by Norcomp features a body length of 1.543", insulation resistance of 5000000000 ohm, and dielectric voltage rating of 1000VAC. Ideal for applications requiring a robust connector with gold flash termination, such as industrial machinery or telecommunications equipment.
HIGH DENSITY
.494 inch
.248 inch
1.543 inch
MACHINED
10 mohm
1000VAC
0.078
HOLE 0.12
3 A
.181 inch
26
180-M62-103L001
180-M62-103L001 by Norcomp is a D-Sub Connector with 62 contacts, gold flash termination, and UL-rated. Ideal for applications requiring high insulation resistance (5G ohm), dielectric voltage withstand (1000VAC), and operating temperatures from -55 to 125 °C.
2.732 inch
311P409-1P-B-12
TE Connectivity's 311P409-1P-B-12 D-Sub Connector features 9 contacts, 2 rows, and a body length of 1.228". With insulation resistance of 1000000000 ohm, it is ideal for commercial applications with operating temperatures ranging from -55 to 125°C. The connector has a male contact gender, gold shell finish, and crimp termination type.
ROHS COMPLIANT
7.3 mohm
44.48
BLUE
GLASS FILLED POLYESTER
7.5A
HOLE .115-.125
150u
UL, CSA
3.1136
A29200-009
Omnetics Connector
The Omnetics Connector A29200-009 is a D NANOMINIATURE CONNECTOR with 9 contacts, rated at 1A signal current. It features LIQUID CRYSTAL POLYMER insulator material and NICKEL shell finish. Ideal for board mounting applications requiring a compact design with FEMALE contact gender and SURFACE MOUNT termination type.
.255 inch
.375 inch
SOCKET
D NANOMINIATURE CONNECTOR
71 mohm
LIQUID CRYSTAL POLYMER
0.025
0.04
#0-80
ALUMINUM ALLOY
0.635
SURFACE MOUNT
A29200-015
Omnetics Connector A29200-015 is a D NANOMINIATURE CONNECTOR with 15 contacts, 0.45"x.125"x.255" dimensions, and LIQUID CRYSTAL POLYMER insulator. Ideal for board mounting applications due to its ALUMINUM ALLOY shell and FEMALE contact gender with SURFACE MOUNT termination type.
.45 inch
.635
2221860-5
TE Connectivity's 2221860-5 D-Sub Connector features polyethylene insulator, zinc shell finish, and UL 94V-0 flammability code. With a total of 78 contacts, it is ideal for commercial applications requiring a rated current of 5A. The connector operates in temperatures ranging from -55 to 125°C and uses crimp termination on a carbon steel shell.
PANEL
ZINC
CARBON STEEL
5/D
2.29
78
L17HTNES4R2C
Amphenol Communications Solutions
L17HTNES4R2C by Amphenol is a D-Sub connector with 9 contacts, gold mating finish, and tin shell finish. It features copper alloy contacts and glass-filled polyethylene insulator material. Ideal for board mounting applications requiring a female socket connector with UL94V-0 flammability rating.
GOLD (15)
Tin (Sn)
COPPER ALLOY
GLASS FILLED POLYETHYLENE
780-M44-213R001
Norcomp 780-M44-213R001 D-Sub Connector features 44 contacts, gold flash finish, and polyamide9T insulator. With a temperature range of -55 to 125°C, it is ideal for board mounting applications requiring a current rating of 3A. The connector's staggered contact pattern and steel shell construction ensure reliable signal transmission in various electronic devices.
IP67
HOLE 0.126
.492 inch
.226 inch
2.089 inch
0.090
.256 inch
44
178-025-313R491
Norcomp Interconnect Devices' 178-025-313R491 D-Sub Connector features 25 contacts, gold flash mating finish, and 5A signal current rating. With a body size of 2.087" x 1.25" x 0.24", it is ideal for board mounting applications requiring reliable female-male connections in tight spaces.
1.25 inch
.24 inch
FEMALE-MALE
INSERT
DDMA-50P-K87
ITT Cannon
ITT Cannon's DDMA-50P-K87 D-Sub Connector features 50 contacts, steel shell material with tin finish. Ideal for cable mounting, it uses crimp termination and PCT-Polyester/Polyethylene insulator. UL 94V-0 rated, this male connector is designed for various industrial applications.
PCT-POLYESTER/POLYETHYLENE
50
1654549
Phoenix Contact
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; Shell Size: 1/E; Contact Material: NOT SPECIFIED; UL Flammability Code: 94V-0;
POLYAMIDE
L717SDE09P1ACH4F
Amphenol
The Amphenol D-Sub Connector L717SDE09P1ACH4F features 9 contacts with Tin-Nickel finish, Brass material, and Polybutylene Terephthalate insulator. Ideal for board mounting applications, this male plug connector has a steel shell and gold-nickel mating contacts (50).
GOLD OVER NICKEL (50)
MDM-9SSB-A174
The ITT Cannon MDM-9SSB-A174 is a D Microminiature Connector with 9 contacts, rated at 3A signal current. Featuring Liquid Crystal Polymer insulation and staggered PCB contact pattern, it offers high durability with 500 cycles. Ideal for cable and panel mounting applications requiring a compact design and reliable performance.
.308 inch
.23 inch
.785 inch
8 mohm
600VAC
500 Cycles
HOLE .091
CABLE AND PANEL
A
MDM-9SSP
The ITT Cannon MDM-9SSP D-Sub Connector features 9 contacts, gold finish, and liquid crystal polymer insulator. With a temperature range of -55 to 125°C, it is suitable for cable and panel mounting applications. This microminiature connector has a durability of 500 cycles and is ideal for use in environments requiring high insulation resistance.
Gold (Au)
#2-56 UNC
JACKPOST
YELLOW CHROMATE/CADMIUM
DBMM-25P-A101
The ITT Cannon DBMM-25P-A101 D-Sub Connector features 25 contacts, rated at 5A signal current. With a shell made of carbon steel and finished with cadmium, it is suitable for applications requiring a male plug connector with solder termination. The connector has a body length of 2.088", width of 0.494", depth of 0.186", and mating contact pitch of 0.109".
.186 inch
2.088 inch
CADMIUM
DCMM-8W8S-F225
DCMM-8W8S-F225 by ITT Cannon is a D-Sub Connector with 8 contacts, rated at 7.5A signal current. Featuring stainless steel shell material, it has a dielectric voltage of 500VAC and operates b/w -55 to 150°C. Ideal for cable and panel mounting applications due to its durable design and locking feature.
2.729 inch
RECTANGULAR
POLYETHYLENE PCT
HOLE .120
150
STAINLESS STEEL
8
8 AWG
MDM-15SH003F-F222
MDM-15SH003F-F222 by ITT Cannon is a D Microminiature Connector with 15 contacts, rated at 3A signal current. It features Liquid Crystal Polymer insulation, withstands up to 600VAC, and operates b/w -55°C to 200°C. Ideal for applications requiring high durability and precision connections in tight spaces.
STANDARD: MIL-DTL-83513, POLARIZED
.935 inch
RG-178/U
HOLE .09
FLOAT MOUNT
200
CADMIUM PLATED
B
.11 inch
32 AWG
MDM-21PH003F-F222
MDM-21PH003F-F222 by ITT Cannon is a D Microminiature Connector with 21 contacts, rated at 3A signal current. Featuring Liquid Crystal Polymer insulation, it has a dielectric voltage of 600VAC and operates b/w -55°C to 200°C. Ideal for applications requiring durable connectors with small form factor and high insulation resistance.
1.085 inch
C
21
MDM-21PH003L-F222
MDM-21PH003L-F222 by ITT Cannon is a D MICROMINIATURE CONNECTOR with 21 contacts, rated at 3A signal current. Featuring Liquid Crystal Polymer insulation, it offers high durability with 500 cycles and operates in temperatures ranging from -55 to 200°C. Ideal for applications requiring reliable connections in compact spaces.
MDM-21SCBRM7-F222
MDM-21SCBRM7-F222 by ITT Cannon is a D-sub connector with 21 contacts, rated for 3A signal current. Featuring liquid crystal polymer insulation, it has a dielectric strength of 600VAC and operates b/w -55°C to 200°C. Ideal for board and panel mounting applications requiring high durability with a shell made of aluminum alloy.
.31 inch
.42 inch
#2-56
BOARD AND PANEL
2.54
.109 inch
MDM-25SCBRM7-F222
The ITT Cannon MDM-25SCBRM7-F222 D-Sub Connector features 25 contacts, liquid crystal polymer insulator, and cadmium plated shell. With a rated current of 3A, it is ideal for applications requiring high durability and operating temperatures ranging from -55 to 200°C. Suitable for board and panel mounting in various electronic systems.
1.185 inch
MDM-25SH003B-F222
MDM-25SH003B-F222 by ITT Cannon is a D MICROMINIATURE CONNECTOR with 25 contacts, rated at 3A signal current. Featuring LIQUID CRYSTAL POLYMER insulation material, it offers high durability of 500 cycles and operates in temperatures ranging from -55 to 200 °C. Ideal for applications requiring a compact design and reliable connectivity such as aerospace and military equipment.
MDM-9PH006B-F222
ITT Cannon's MDM-9PH006B-F222 D-sub connector features 9 contacts, 3A signal current rating, and 500 cycles durability. With a body length of 0.785", it is ideal for applications requiring a male contact gender, crimp termination type, and mounting on cable or panel.
MDM-9SCBRM7-F222
MDM-9SCBRM7-F222 by ITT Cannon is a D-sub connector with 9 contacts, rated at 3A signal current. It features liquid crystal polymer insulation material, cadmium plated shell finish, and operates in temperatures ranging from -55 to 200°C. Ideal for board and panel mounting applications requiring a durable microminiature connector with staggered PCB contact pattern.
MDM-9SH003B-F222
The ITT Cannon MDM-9SH003B-F222 D-Sub Connector has 9 contacts, rated at 3A signal current. With a body length of 0.785", it offers high insulation resistance of 5000000000 ohm and withstands up to 600VAC. Ideal for applications requiring a durable, microminiature connector with liquid crystal polymer insulator material.
DEU-9P-K87
DEU-9P-K87 by ITT Cannon is a D-SUB Connector with 9 contacts, rated at 5A power. Made of glass-filled thermoplastic, it withstands up to 1000VAC. Operating b/w -55°C to 125°C, it has a durability of 500 cycles and uses crimp termination for cable mounting applications.
GLASS FILLED THERMOPLASTIC
TIN/NICKEL
18 AWG
30 AWG
MDM-15PSB-A141
MDM-15PSB-A141 by ITT Cannon is a D Microminiature Connector with 15 contacts, rated at 3A signal current. Featuring Liquid Crystal Polymer insulation material, it offers high durability with 500 cycles and operates b/w -55°C to 125°C. Ideal for applications requiring a compact design and reliable connectivity in harsh environments.
IRRIDITE / ALODINE
MDM-15PSB-A172
MDM-15PSB-A172 by ITT Cannon is a D MICROMINIATURE CONNECTOR with 15 contacts, rated at 3A signal current. Featuring LIQUID CRYSTAL POLYMER insulation material, it offers high durability with 500 cycles. Ideal for applications requiring a compact design and reliable performance in temperatures ranging from -55 to 125°C.
© 2023 All rights reserved
