Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
661-009-264-035
Edac
Edac's 661-009-264-035 D-Sub Connector features TIN finish, POLYETHYLENE/POLYESTER insulator, and COPPER ALLOY contacts. Ideal for board and panel mounting applications with 9 male-male contacts in a PLUG shell size of 1/E. MIL compliant with UL94V-0 flammability rating for reliable performance.
STANDARD: MIL-C-24308, EMI/RFI SHIELDED, OTHER STACKING CONNECTOR: 9 CONTACTS, SHELL SIZE: 1/E, POLARIZED
PLUG
D SUBMINIATURE CONNECTOR
GOLD FLASH
TIN
MALE-MALE
COPPER ALLOY
NO
POLYETHYLENE/POLYESTER
e3
YES
MULTIPLE MATING PARTS AVAILABLE
BOARD AND PANEL
GENERAL PURPOSE
STEEL
1/E
SOLDER
9
94V-0
12226-8250-00PL
3m Electronic Products Division
3M Electronic Products Division's 12226-8250-00PL D-Sub Connector features GOLD OVER NICKEL termination, LIQUID CRYSTAL POLYMER insulator, and 26 contacts. Ideal for surface mount applications in electronics requiring a reliable FEMALE connector with 94V-0 flammability rating.
3M
RECEPTACLE
OTHER D TYPE CONNECTOR
NOT SPECIFIED
GOLD OVER NICKEL
FEMALE
LIQUID CRYSTAL POLYMER
e4
SURFACE MOUNT
26
164A17329X
Conec
164A17329X by Conec is a D-Sub connector with 44 contacts, rated at 25A signal current. It features a mating contact pitch of 0.09", insulation resistance of 5Gohm, and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
REAR SPACER & LOCK, HIGH DNTY
.509 inch
2.103 inch
AU ON NI
STAGGERED
10 mohm
RND PIN-SKT
1000VAC
2.6966
5000000000 ohm
GLASS FILLED POLYAMIDE
0.09
0.078
THREADED
STRAIGHT
BOARD
3
125
-55 Cel
1.9812
25 A
UL
COMMERCIAL
3/B
D Type Connectors
.175 inch
2.286
44
164X11779X
The Conec 164X11779X D-Sub Connector has a body length of 1.556" and width of 0.509", with a dielectric voltage rating of 1000VDC. It is designed for commercial use, featuring a total of 15 contacts and rated current of 7.5A for signal transmission. The connector operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring reliable connectivity.
1.556 inch
PREASSEM CONN
1000VDC
BLACK
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
HOLE .115-.125
LOCKING
CABLE
2
7.5 A
CRIMP
15
1688793
Phoenix Contact
Phoenix Contact 1688793 D-Sub Connector features TIN finish, 9 contacts, steel shell, and solder termination. Ideal for cable and panel mounting applications requiring a male connector with UL 94V-0 flammability rating.
NOT APPLICABLE
MALE
CABLE AND PANEL
1688913
Phoenix Contact 1688913 D-Sub Connector features 15 contacts, yellow chromate finish, and steel shell material. Ideal for cable and panel mounting with male contact gender. UL 94V-0 rated for various industrial applications requiring reliable crimp termination.
YELLOW CHROMATE
2/A
638-026-230-042
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707 VAC; No. of Connectors: ONE; Terminal Length: .189 inch;
.496 inch
.256 inch
1.541 inch
BRASS
15 mohm
707 VAC
4.45
1000000000 ohm
GLASS FILLED POLYBUTYLENE TEREPHTHALATE POLYETHYLENE
#4-40
CLINCH NUT
ONE
100
-50 Cel
1.98
FLASH
5 A
MIL; UL
NICKEL
.189 inch
2.29
0.28
638-015-630-047
The Edac 638-015-630-047 is a D-sub connector with a mating contact pitch of 0.09 inches, insulation resistance of 1G ohm, and a body length of 1.213 inches. It is commonly used in applications requiring reliable signal transmission and board mounting options.
BOARD LOCK
1.213 inch
GOLD (30)
STANDOFF
30u
638-015-630-041
Edac D-Sub Connector 638-015-630-041 has Mating Contact Pitch of 0.09", Insulation Resistance of 1Gohm, and Dielectric Withstanding Voltage of 707VAC. Ideal for board and panel mounting applications requiring a reliable female connector with 15 contacts in a straight shell style.
HOLE .12
180-M44-213R001
Norcomp Interconnect Devices
Norcomp's 180-M44-213R001 D-Sub Connector features a Mating Contact Pitch of 0.090", Insulation Resistance of 5000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board mounting applications in electronics, this connector has a temperature range from -55 to 125 °C and UL Flammability Code of 94V-0.
HOLE 0.126
.492 inch
.226 inch
2.089 inch
Gold Flash (Au)
POLYAMIDE9T
0.090
HOLE 0.12
3 A
2.28
178-009-413R571
Norcomp 178-009-413R571 D-Sub Connector features gold termination, polyamide insulator, and nickel shell. Ideal for board mounting applications with male-female contact gender and 9 contacts in size 1/E.
OTHER STACKING CONNECTOR: 9 CONTACTS; 1/E SHELL SIZE
GOLD
MALE-FEMALE
178-025-613R571
Norcomp Interconnect Devices' 178-025-613R571 D-Sub Connector features gold-plated brass contacts, UL94V-0 flammability rating, and a total of 25 contacts. With a mating contact pitch of 0.11", it is ideal for board mounting applications requiring a reliable signal current of up to 5A.
OTHER STACKING CONNECTOR: 25 CONTACTS; 3/B SHELL SIZE
SPLIT BOARD LOCK
1.25 inch
.24 inch
2.087 inch
0.11
RIGHT ANGLE
TWO
2+2
2.84/3.91
2.77
25
181-026-213R561
Norcomp's 181-026-213R561 D-Sub Connector features GOLD FLASH termination, POLYAMIDE9T insulator, and NICKEL shell. Ideal for board mounting applications with FEMALE contact gender, 26 contacts, and UL94V-0 flammability rating.
170-037-273L020
Norcomp's 170-037-273L020 D-Sub Connector features 37 contacts, gold finish, and 5A power rating. With a body length of 2.728", it is ideal for cable mounting applications in temperatures ranging from -50 to 100°C. The connector's polybutylene terephthalate insulator ensures high insulation resistance of 1Gohm.
.196 inch
2.728 inch
POLYBUTYLENE TEREPHTHALATE
0.109
HOLE 0.236
4/C
.272 inch
37
170-009-272L030
Norcomp's 170-009-272L030 D-Sub Connector features 9 contacts, steel shell material with tin finish. It is a female crimp connector with Polybutylene Terephthalate insulator. Ideal for cable mounting applications due to its UL94V-0 flammability rating.
170-037-273L010
The Norcomp Interconnect Devices 170-037-273L010 D-Sub Connector has a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Rated Current of 5A. It is used in applications requiring a reliable female connector with gold finish, UL certification, and operating temperatures ranging from -50°C to 100°C.
HOLE 0.098
170-009-272L020
Norcomp's 170-009-272L020 D-Sub Connector features gold termination, PBT insulator, and steel shell. With 9 contacts, it is ideal for cable mounting applications requiring a female connector with a size of 1/E.
170-015-272L000
Norcomp's 170-015-272L000 D-Sub Connector features 15 contacts, 2 rows, and a mating contact pitch of 0.109". With a rated current of 5A, it is ideal for cable mounting applications in temperatures ranging from -50 to 100°C. The connector boasts an insulation resistance of 1Gohm and a shell made of steel with TIN finish.
170-037-272L000
Norcomp's 170-037-272L000 D-Sub Connector has a mating contact pitch of 0.109", insulation resistance of 1Gohm, and rated current of 5A. Ideal for cable mounting applications, this connector features a steel shell with crimp termination and female contacts in UL black insulator.
DE-9P-A191-K87
ITT Cannon
DE-9P-A191-K87 by ITT Cannon is a D-sub connector with 9 contacts, gold over nickel termination, and PCT-Polyester/Polyethylene insulator. It has a body size of 1.213" x 0.494" x 0.189", suitable for cable and panel mounting applications requiring a male round pin/socket contact style in a steel shell with UL94V-0 flammability rating.
.494 inch
PCT-POLYESTER/POLYETHYLENE
0.108
0.112
HOLE .112-.124
RDBD-25S-LNA(4-40)(55)
Hirose Electric
RDBD-25S-LNA(4-40)(55) by Hirose Electric is a D-Sub connector with 25 contacts, rated at 3A signal current. It features a dielectric voltage of 1800VAC and insulation resistance of 5000000000 ohm. Ideal for board mounting applications requiring a reliable right-angle receptacle with staggered contact pattern.
.516 inch
2.088 inch
25 mohm
1800VAC
2.8448
8u
.157 inch
2.7686
ID15P33E4GX00LF
Amphenol Communications Solutions
ID15P33E4GX00LF by Amphenol is a D-Sub connector with 15 contacts, steel shell material, and polyester insulator. It features tin/zinc chromium finish and solder termination. Ideal for board mounting applications requiring a male contact gender in a compact 2/A shell size.
POLYESTER
TIN/ZINC CHROMIUM
DD15M10000
Positronic Industries
DD15M10000 by Positronic Industries is a D-Sub Connector with dimensions 1.213" x 0.494" x 0.375". Featuring Gold Flash (Au) - Nickel (Ni) termination, it has 15 contacts in a single row for panel mounting applications. The connector is UL certified with a blue insulator and steel shell, suitable for various electronic devices.
STANDARD: MIL-DTL-24308; MIL-C-39029, POLARIZED, COMPATIBLE CONTACTS: MC8022DCH; MC8022DAL
.375 inch
MACHINED
Gold Flash (Au) - with Nickel (Ni) barrier
BLUE
GLASS FILLED POLYESTER
PANEL
ZINC
1-745494-8
TE Connectivity
TE Connectivity 1-745494-8 D-Sub Connector features 15 contacts, matte tin finish, and EMI shielding. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring reliable signal transmission in discrete or round cable types. The connector has a male contact gender and plug body style for easy straight mounting with IDC termination.
.604 inch
DISCRETE, ROUND
Matte Tin (Sn) - with Nickel (Ni) barrier
30 mohm
1.3622
.06 inch
500000000 ohm
POLYETHYLENE
2.4A
INSERT
1
105
50u
2.4 A
IDC
22 AWG
26 AWG
1.3344
9661287700
Harting Electronics & Kg
9661287700 by Harting Electronics & Kg is a D-SUB connector with DIN and IEC conformity. Featuring copper alloy contacts, it has 9 male contacts in shell size 1/E. Ideal for cable and panel mounting with IDC termination, suitable for various industrial applications.
STANDARDS: DIN 41652; IEC 60807
1-745491-7
TE Connectivity 1-745491-7 D-Sub Connector features 9 contacts, EMI shielding, and polyethylene insulator. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring a reliable signal current of 2.4A in a straight receptacle mounting style.
AMPLIMITE
.567 inch
1.228 inch
Tin (Sn) - with Nickel (Ni) barrier
1.112
.1112
1-745491-9
TE Connectivity D-Sub Connector 1-745491-9 with 9 contacts, 2 rows, and EMI shielding. Features include insulation resistance of 5G ohm, operating temp range -55 to 105°C, and rated current of 3A. Ideal for commercial applications requiring reliable signal connections in discrete or round cable types.
115/230VAC
2.74
20 AWG
1-745495-9
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
2.08 inch
3A
1-745496-8
TE Connectivity 1-745496-8 D-Sub Connector with 25 contacts, rated at 2.4A signal current. Features EMI shielding, matte tin finish, and polyethylene insulator for high reliability. Ideal for commercial applications requiring a male plug connector with IDC termination on a cable mount setup.
1.38
1658641-1
TE Connectivity D-Sub Connector 1658641-1 with 50 contacts, insulation resistance of 500M ohm, and operating temperature range from -55 to 105 °C. Ideal for cable and panel mounting applications due to its steel shell material and crimp termination type.
AMPLIMITE, SHIELDED
.605 inch
.471 inch
2.635 inch
1.39
.18 inch
GLASS FILLED POLYAMIDE/POLYESTER
3.1 A
5/D
50
24 AWG
1658641-3
TE Connectivity 1658641-3 D-Sub Connector features 50 contacts, GLASS FILLED POLYAMIDE/POLYESTER insulator, and 105°C max operating temp. Ideal for commercial applications requiring reliable male connectors with crimp termination and UL certification.
.432 inch
2-745495-0
TE Connectivity's 2-745495-0 D-Sub Connector features a Mating Contact Pitch of 0.108", Insulation Resistance of 5G ohm, and EMI Shielding. Ideal for applications requiring a rated current of 2.4A, with a temperature range from -55 to 105°C. Suitable for commercial use in cable mounting setups.
1u
2-745496-0
TE Connectivity 2-745496-0 D-Sub Connector with 25 contacts, rated 3A signal current. Features EMI shielding, matte tin finish, and polyethylene insulator. Ideal for commercial applications requiring reliable cable termination in a temperature range of -55 to 105°C.
207516-6
TE Connectivity 207516-6 is a D-Sub Connector with 25 contacts, UL 94V-0 flammability rating, and EMI shielding. It has a body size of 2.103" x 0.509" x 0.424", suitable for panel mounting applications in temperatures ranging from -55°C to 105°C. The connector features female contact gender, crimp termination type, and steel shell material for reliable performance.
.424 inch
#4-40 UNC
5745908-2
TE Connectivity's 5745908-2 D-Sub Connector features EMI shielding, polyethylene insulator, and a max operating temperature of 105°C. Ideal for applications requiring a male plug with 15 contacts, crimp termination, and steel shell material.
745201-9
TE Connectivity's 745201-9 D-Sub Connector features 2 rows, tin termination with nickel barrier, and polyethylene insulator. With a temperature range of -55 to 105°C, it is ideal for discrete and round cable types in applications requiring a female contact gender and straight mounting style.
PHOSPHOR BRONZE
5745395-2
TE Connectivity's 5745395-2 D-Sub Connector features GLASS FILLED POLYAMIDE/POLYESTER insulator, 105°C max operating temp, and 30u plating thickness. Ideal for board mounting applications with 9 contacts, UL-rated, and female contact gender.
6A
SCREWLOCKS
6 A
.125 inch
5748904-1
TE Connectivity's 5748904-1 D-Sub Connector features GLASS FILLED POLYAMIDE/POLYESTER insulator, 2 rows, and board lock mounting. With a temperature range of -55 to 105 °C, it is ideal for applications requiring a rated current of 2.7A such as signal connections in electronics.
2.7A
THREADED INSERT
2.7 A
5748981-1
TE Connectivity 5748981-1 D-Sub Connector features 25 contacts, GLASS FILLED POLYAMIDE/POLYESTER insulator, and 105°C max operating temp. Ideal for board mounting applications with right angle mounting style and solder termination.
.59 inch
2.84
6.4 A
FCE17-A15PM-250
Amphenol
The Amphenol FCE17-A15PM-250 D-Sub Connector features 15 contacts with Matte Tin finish, Glass Filled Polyethylene insulator, and Steel shell. It is a male connector with solder termination suitable for panel mounting applications. The UL 94V-0 flammability code ensures high safety standards in various electronic devices.
MATTE TIN
Matte Tin (Sn)
GLASS FILLED POLYETHYLENE
FCE17-A15PM-290
The Amphenol FCE17-A15PM-290 D-Sub Connector features 15 contacts, matte tin finish, and glass-filled polyethylene insulator. Ideal for panel mounting applications, with UL 94V-0 flammability rating. Suitable for various electronic devices requiring reliable male connectors.
FCE17-A15SM-250
The Amphenol FCE17-A15SM-250 D-Sub Connector features 15 contacts, matte tin finish, and glass-filled polyethylene insulator. Ideal for panel mounting applications, with a steel shell and solder termination. UL 94V-0 flammability code compliant for reliable performance in various electronic devices.
FCE17-A15SM-290
FCE17-A15SM-290 by Amphenol is a D-Sub Connector with 15 contacts, matte tin finish, and glass-filled polyethylene insulator. It features a filter for noise reduction and is ideal for panel mounting applications requiring reliable female solder connections in a compact steel shell.
FCE17-B25PM-250
FCE17-B25PM-250 by Amphenol is a D-Sub connector with 25 contacts, rated at 5A signal current. Featuring a mating contact pitch of 0.11", it has a body length of 2.088" and is designed for cable mounting applications. The connector's filter feature, matte tin finish, and glass-filled polyethylene insulator make it ideal for high-performance electronic systems requiring reliable signal transmission.
FCE17-B25SM-210
The Amphenol FCE17-B25SM-210 D-Sub Connector features 25 contacts, rated at 5A signal current. With a mating contact pitch of 0.11", it is designed for cable mounting with solder termination. The connector's steel shell and glass-filled polyethylene insulator make it suitable for applications requiring high reliability in harsh environments.
FCE17-B25SM-250
Amphenol's FCE17-B25SM-250 D-Sub Connector features 25 contacts, 5A power/signal rating, and 3 billion ohm insulation resistance. Ideal for applications requiring a mating contact pitch of 0.11", with a temperature range from -40°C to 85°C. Suitable for cable mounting with solder termination in UL-rated black insulator material.
3000000000 ohm
85
-40 Cel
15u
FCE17-C37PM-210
Amphenol's FCE17-C37PM-210 D-Sub Connector features 37 contacts, matte tin finish, and glass-filled polyethylene insulator. Ideal for panel mounting applications, with male contact gender and solder termination type. Shell made of steel with UL flammability code 94V-0 for reliable performance.
FCE17-E09PM-210
The Amphenol FCE17-E09PM-210 D-Sub Connector features 9 contacts, matte tin finish, and glass-filled polyethylene insulator. Ideal for panel mounting applications, this male connector with steel shell is UL 94V-0 rated for high flammability resistance.
© 2023 All rights reserved
