Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
180-062-102-021
Edac
D Type Connectors; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Total No. of Contacts: 62;
0.250" CLINCH NUT, BOARD SIDE
.496 inch
2.732 inch
RECEPTACLE
PREASSEM CONN
AU
MALE
BRASS
STAGGERED
15 mohm
RND PIN-SKT
500VAC
1000000000 ohm
BLACK
POLYBUTYLENE TEREPHTHALATE
0.095
#4-40
CLINCH NUT
PANEL
3
100
-50 Cel
GENERAL PURPOSE
FLASH
2 A
UL, CSA
COMMERCIAL
TIN
STEEL
D Type Connectors
.11 inch
SOLDER LUG
62
24 AWG
1658610-6
TE Connectivity
TE Connectivity's 1658610-6 D-Sub Connector features a Mating Contact Pitch of 0.109", Insulation Resistance of 5Gohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for commercial applications, this connector has a Total No. of Contacts at 15, Termination Type as IDC, and Mounting Type as Cable.
ROHS COMPLIANT
.323 inch
1.541 inch
PLUG
FEMALE
PHOSPHOR BRONZE
25 mohm
1.668
5000000000 ohm
POLYETHYLENE
0.109
0.112
THREADED
CABLE
2
30u
1.25 A
UL
IDC
15
26 AWG
28 AWG
.1112
N10226-52B3PC
3m Electronic Products Division
N10226-52B3PC by 3M Electronic Products Division is a D-Sub Connector with 26 contacts, gold termination finish, and UL flammability rating. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels in tight spaces.
3M, SHIELDED
.37 inch
.45 inch
1.46 inch
OTHER D TYPE CONNECTOR
NOT SPECIFIED
Gold (Au) - with Nickel (Ni) barrier
RECTANGULAR
NO
500000000 ohm
BEIGE
GLASS FILLED POLYESTER
e4
0.05
M2.5
RIGHT ANGLE
BOARD AND PANEL
4
105
-55 Cel
1.905
1 A
NICKEL
ZINC ALLOY
2.54
SOLDER
26
94V-0
180-015-272-000
The Edac D-Sub Connector 180-015-272-000 has a body length of 1.213", insulation resistance of 1000000000 ohm, and dielectric voltage rating of 500VAC. It is ideal for commercial applications requiring a reliable female contact connector with 15 contacts, operating b/w -50°C to 100°C.
NO HARDWARE
.366 inch
1.213 inch
LOCKING
MOUNTING FLANGE
0 inch
N10214-52B2PC
N10214-52B2PC by 3M is a D-Sub Connector with 14 contacts, gold mating finish, and UL-rated. It has a body length of 1.16", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting in commercial applications requiring high reliability.
3M
1.16 inch
GOLD (30) OVER NICKEL (80)
COPPER ALLOY
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
GLASS FILLED PCT
.15 inch
14
N10236-52B2PC
N10236-52B2PC by 3m Electronic Products Division is a D-Sub Connector with a mating contact pitch of 0.05 inches, body length of 1.71 inches, and insulation resistance of 500MΩ. It is commonly used in board and panel mounting applications for its right angle mounting style and female contact gender.
1.71 inch
36
N10250-52G3PC
N10250-52G3PC by 3M Electronic Products Division is a D-Sub Connector with 50 contacts, gold-plated copper alloy material, and UL flammability rating of 94V-0. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting applications requiring high reliability in commercial settings.
2.06 inch
50
10214-R21TS
OTHER D TYPE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; PCB Contact Row Spacing (mm): 1.905;
.36 inch
.23 inch
GOLD FLASH OVER NICKEL
102
85
-20 Cel
.16 inch
PRESS FIT
10220-55G3PC
10220-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. It is used in applications requiring a reliable, right-angle mounting solution for PCB connections in commercial environments.
1.31 inch
GOLD (30) OVER NICKEL (100)
20
10226-55G3PL
The 3m Electronic Products Division D-Sub Connector 10226-55G3PL features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a female contact gender with gold flash over nickel finish for reliable signal transmission in commercial settings at temperatures ranging from -55 to 105°C.
GOLD (8) OVER NICKEL (50)
8u
10226-R21TS
10226-R21TS D-Sub Connector by 3M EPD features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a total of 26 contacts, gold flash termination finish, and operates b/w -20°C to 85°C temperature range.
Gold Flash (Au) - with Nickel (Ni) barrier
10236-55G3PC
10236-55G3PC by 3M is a D-Sub Connector with 36 contacts, rated for 1A signal current. It features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting applications requiring reliable female connectors with gold-nickel finish.
10236-55H3PC
10236-55H3PC by 3M is a D-Sub Connector with 36 contacts, gold/nickel finish, and glass-filled PCT shell. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission.
GOLD OVER NICKEL
10240-55G3PC
10240-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. Ideal for commercial applications requiring a reliable right-angle receptacle connector with female contact gender and solder termination on board or panel mounting.
1.81 inch
40
10250-55H3PC
The 3m Electronic Products Division D-Sub Connector 10250-55H3PC features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for board and panel mounting applications, this connector has gold flash over nickel termination finish for reliable signal transmission in commercial settings.
10268-55H3PC
The 3M Electronic Products Division's 10268-55H3PC D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this connector has a total of 68 contacts, with a right-angle receptacle design suitable for board and panel mounting.
2.51 inch
68
10236-55G3PL
The 3m Electronic Products Division D-Sub Connector features a Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. Ideal for board and panel mounting applications with a max operating temperature of 105°C.
1734285-3
TE Connectivity 1734285-3 D-Sub Connector has Mating Contact Pitch of 0.109", Insulation Resistance of 1Gohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board and panel mounting applications in commercial settings due to its reliability and UL certification.
OTHER STACKING CONNECTOR: 9 CONTACTS, 1/E SHELL SIZE
1.244 inch
.774 inch
1.219 inch
D SUBMINIATURE CONNECTOR
Matte Tin (Sn)
FEMALE-FEMALE
40 mohm
3.336
e3
THREADED INSERT
2+2
4.064
3 A
1/E
.125 inch
2.7686
9
.1946
1-1734285-3
TE Connectivity 1-1734285-3 D-Sub Connector features 15 contacts, matte tin finish, and copper alloy material. With a rated current of 3A, it is ideal for commercial applications requiring a reliable connection. The connector has a max operating temperature of 105°C and insulation resistance of 1Gohm, suitable for board and panel mounting in various electronic systems.
OTHER STACKING CONNECTOR: 15 CONTACTS, 2/A SHELL SIZE
1.547 inch
1734285
2/A
380-025-113L001
Norcomp Interconnect Devices
Norcomp Interconnect Devices' 380-025-113L001 is a D-sub connector with a mating contact pitch of 0.05 inch. It has a body length of 1.169 inch and insulation resistance of 1G ohm. This connector is commonly used in applications requiring reliable signal transmission and can withstand temperatures from -55 to 85°C.
.289 inch
.212 inch
1.169 inch
D MICROMINIATURE CONNECTOR
45 mohm
0.043
HOLE 0.11
STRAIGHT
BOARD
ONE
1.1
15u
D
.118 inch
1.27
25
DCMM-8W8S-F225
ITT Cannon
DCMM-8W8S-F225 by ITT Cannon is a D-Sub Connector with 8 contacts, rated at 7.5A signal current. Featuring stainless steel shell material, it has a dielectric voltage of 500VAC and operates b/w -55 to 150°C. Ideal for cable and panel mounting applications due to its durable design and locking feature.
.494 inch
.186 inch
2.729 inch
10 mohm
500 Cycles
YES
POLYETHYLENE PCT
MULTIPLE MATING PARTS AVAILABLE
HOLE .120
CABLE AND PANEL
1
150
7.5 A
STAINLESS STEEL
4/C
8
8 AWG
DCMM-8W8S-A101
DCMM-8W8S-A101 by ITT Cannon is a D-sub connector with 2 rows, 8 contacts, and rated current of 7.5A. It has a dielectric voltage of 500VAC, operating temperature range from -55 to 150°C, and durable for 500 cycles. Ideal for applications requiring reliable signal transmission in harsh environments.
PCT-POLYESTER/POLYETHYLENE
HOLE .12
CADMIUM
CARBON STEEL
C
DDMM-43W2S-N-F225
DDMM-43W2S-N-F225 by ITT Cannon is a D-Sub Connector with 43 contacts, rated at 7.5A signal current. It features a dielectric voltage of 500VAC, operating temperature range from -55 to 150°C, and durable stainless steel shell. Ideal for applications requiring reliable signal transmission in harsh environments.
NOT APPLICABLE
5/D
43
DAMM-3W3S-F225
ITT Cannon's DAMM-3W3S-F225 D-Sub Connector features 500VAC Dielectric Withstanding Voltage, PCT-POLYESTER/POLYETHYLENE Insulator Material, and 150°C Max Operating Temperature. Ideal for applications requiring a 7.5A Rated Current Signal with UL Flammability Code of 94V-0.
SOCKET
DDMM-43W2S-A101
DDMM-43W2S-A101 by ITT Cannon is a D-Sub Connector with 43 contacts, rated at 7.5A signal current. It has a dielectric voltage of 500VAC and operates b/w -55 to 150°C. Ideal for applications requiring durable, high-current connections in harsh environments.
S41P2
A-DS09LL-WP
Assmann Wsw Components
A-DS09LL-WP by Assmann Wsw Components is a D-SUB Connector with 9 contacts, rated for 2A signal current. It features a waterproof design, male contact gender, and glass-filled polyamide insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -20 to 85°C.
.827 inch
.183 inch
1.551 inch
20 mohm
GLASS FILLED POLYAMIDE
#4-40UNC
WATERPROOF
1u
.112 inch
22 AWG
© 2023 All rights reserved
