Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
R141082000W
Radiall S A
R141082000W by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.115 dB insertion loss. It is used in RF applications up to 4 GHz, featuring POLYTETRAFLUOROETHYLENE insulator material for durability and NICKEL shell finish for reliability.
.563 inch
PLUG
RG-141
50 ohm
RF BNC CONNECTOR
MALE
COAX
500 Cycles
.115 dB
5000000000 ohm
POLYTETRAFLUOROETHYLENE
BNC
LOCKING
STRAIGHT
CABLE
1
4 GHz
165
-65 Cel
POLARIZED HOUSING
COMMERCIAL
NICKEL
BRASS
RF BNC Connectors
CRIMP
1.3
R141182000W
R141182000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.175 dB insertion loss, and 1.35 VSWR. It is used in commercial applications up to 4 GHz frequency, featuring POLYTETRAFLUOROETHYLENE insulator material for durability and NICKEL shell finish for reliability in cable mounting setups.
1.12 inch
.175 dB
RIGHT ANGLE
1.35
APH-HDBNCP-T
Amphenol
The Amphenol APH-HDBNCP-T is a RF BNC connector with gold termination, bayonet coupling, and PTFE insulator. It has 75 ohm impedance, 1.07 VSWR, and operates up to 3 GHz. Ideal for cable mounting applications requiring high-frequency signal transmission.
75 ohm
NOT SPECIFIED
GOLD
BAYONET
NO
e4
3 GHz
GENERAL PURPOSE
1.07
BNC7T-P-C-GN-ST-CA3D
Samtec
Samtec's BNC7T-P-C-GN-ST-CA3D is a RF BNC connector with GOLD finish, 75 ohm impedance, and 1.3 VSWR. Ideal for applications requiring high-frequency signal transmission up to 4 GHz, such as in telecommunications and broadcast systems.
APPLICABLE CABLE: RG 179
MULTIPLE MATING PARTS AVAILABLE
SOLDER
HDBNC-P-C-GN-ST-CA6
The Samtec HDBNC-P-C-GN-ST-CA6 is a RF BNC connector with 75 ohm impedance, suitable for RG-6 cables. Featuring gold termination finish and bayonet coupling, it operates up to 12 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
.947 inch
.305 inch
RG-6
12 GHz
51S107-802N5
Rosenberger Hochfrequenztechnik & Kg
51S107-802N5 by Rosenberger is a BNC Connector with 0.575" body diameter, 0.16 dB insertion loss, and gold termination. Ideal for RF applications, it has a characteristic impedance of 50 ohm and operates up to 10 GHz. With POLYTETRAFLUOROETHYLENE insulator material, it offers high durability and reliability in commercial settings.
.697 inch
.575 inch
RD-316/U
1.5 mohm
.16 dB
10 GHz
85
-45 Cel
HDBNC-J-P-GN-ST-TH1
Samtec's HDBNC-J-P-GN-ST-TH1 is a RF BNC connector with 75 ohm impedance, suitable for up to 6 GHz frequency. It features a dielectric voltage of 2100VAC and operates b/w -65°C to 125°C. Ideal for commercial applications requiring reliable signal transmission.
JACK
NOT APPLICABLE
2100VAC
BOARD
6 GHz
125
1.45
HDBNC-J-P-GN-RA-BH2
Samtec's HDBNC-J-P-GN-RA-BH2 is a RF BNC connector with 75 ohm impedance, 1.5 mohm contact resistance, and 6 GHz operating frequency. Ideal for board mounting in commercial applications requiring high dielectric voltage withstand and temperature range from -65 to 125 °C.
APH-HDBNCP-T-50
APH-HDBNCP-T-50 by Amphenol is a RF BNC connector with 50 ohm impedance, suitable for commercial applications. Featuring a gold shell finish and brass shell material, it operates b/w -55 to 125 °C with a max frequency of 6 GHz. With durability up to 500 cycles, this plug-style connector is designed for reliable performance in various electronic setups.
.435 inch
-55 Cel
330876
TE Connectivity
The TE Connectivity 330876 is a BNC connector with a body diameter of 0.572 inch, PTFE insulator material, and bayonet coupling type. It operates b/w -55 to 85°C, has a characteristic impedance of 50 ohm, and can handle up to 4 GHz frequency. Ideal for RF applications requiring reliable signal transmission in commercial settings.
APPLICABLE CABLES: RG 178/U; RG 178A/U; RG 178B/U; RG 196/U; RG 196A/U
.572 inch
RG 178, RG 196
PTFE
YES
331974
ONE
SILVER
4488
Pomona Electronics
The Pomona Electronics 4488 is a BNC connector with gold termination, nickel shell finish, and brass shell material. It has a body diameter of 0.571" and is ideal for RF applications with characteristic impedance of 50 ohm. This male plug connector is designed for RG-55 cable mounting using clamp solder termination.
APPLICABLE CABLES: RG/U: 55; RG/U55A; RG/U55B; RG/U58; RG/U58C
1.25 inch
.571 inch
RG-55
Gold (Au)
CLAMP SOLDER
R141007161
Radiall S A R141007161 BNC Connector features 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz with BAYONET coupling, GOLD/NICKEL finish, and POLYTETRAFLUOROETHYLENE insulator. Suitable for cable mounting with male gender plug and clamp termination.
APPLICABLE CABLES: RG 58; RG 141
Gold (Au) - with Nickel (Ni) barrier
.13 dB
CLAMP
1.22
R141075161
R141075161 BNC Connector by Radiall S A is a gold-plated, 50 ohm RF connector with a 0.13 dB insertion loss and a voltage standing wave ratio of 1.22. It is commonly used for cable termination in applications up to 4 GHz.
APPLICABLE CABLES: RG 174; RG 316, CAPTIVE CENTER CONTACT
R141082161
Radiall S A's R141082161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
APPLICABLE CABLES: RG 58; RG 14, CAPTIVE CENTER CONTACT
R142076161
R142076161 BNC Connector by Radiall S A features a body diameter of 0.563", 500M ohm insulation resistance, and 0.2 dB insertion loss. Ideal for RF applications, it has a dielectric voltage of 1000VAC, MIL & IEC conformity, and operates b/w -35 to 70°C.
STANDARDS: MIL-C-39012; IEC 169-8, APPLICABLE CABLE: RG 179, VSWR MAX AT 1 GHZ
RG-179, RG-187
1000VAC
100 Cycles
.2 dB
500000000 ohm
1.5 GHz
70
-35 Cel
31-315
Amphenol's 31-315 BNC Connector has a body diameter of 0.562", insulation resistance of 5GΩ, and insertion loss of 0.2dB. It is commonly used in RF applications with characteristic impedance of 50Ω and max operating frequency of 4GHz.
APPLICABLE CABLES: RG 174/U, RG 188/U, RG 316/U
1.189 inch
.562 inch
RG-174
15875
The Amphenol 15875 BNC Connector features a 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, this connector has a silver termination finish and PTFE insulator material. With a bayonet coupling type and brass shell material, it offers durability with 500 cycles.
APPLICABLE CABLES: RG 178/U, RG 196/U
.891 inch
Silver (Ag)
31-70013
Amphenol 31-70013 BNC Connector has Dielectric Voltage of 2200VAC, operates b/w -65 to 165°C, with a VSWR of 1.9. Ideal for RF applications up to 4GHz, it features a brass shell and PTFE insulator suitable for RG-179 cable termination.
APPLICABLE CABLES: RG 179/U; RG 187/U
.569 inch
RG-179
2200VAC
NATURAL
1.9
31-71008-RFX
Amphenol 31-71008-RFX is a BNC connector with 0.571" body diameter, 5000000000 ohm insulation resistance, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell construction for durability in commercial settings.
APPLICABLE CABLES: RG 59/U; RG 62/U
RG-59
1.25
RBD-75-M-00
TE Connectivity's RBD-75-M-00 is a BNC connector with 75 ohm impedance, bayonet coupling, and PTFE insulator. Ideal for RF applications up to 2.8 GHz, it features a brass shell, nickel finish, and solder termination for RG 179 cables.
APPLICABLE CABLES:RG-59
RG 179
115/230VAC
2.8 GHz
2-331350-9
TE Connectivity's 2-331350-9 BNC Connector features Insulation Resistance of 5x10^9 ohm, Insertion Loss of 0.2 dB, and Body Depth of 1.188". Ideal for RF applications with a max operating frequency of 4 GHz, it offers durability with 500 cycles and MIL conformity.
APPLICABLE CABLES: RG-142/U; RG-142A/U; RG-142B/U;
1.188 inch
RG 142A, RG 142B, RG 142
2 mohm
225398-6
Other RF Connectors
2-329444-1
TE Connectivity's 2-329444-1 BNC Connector features a 0.572" body diameter, PTFE insulator, and 50 ohm impedance. Ideal for RF applications with RG 58 cable types, it operates from -55 to 85°C with a VSWR of 1.35 up to 4 GHz.
APPLICABLE CABLES: RG 58/U; RG 58A/U; RG 58B/U; RG 58C/U
RG 58C, RG 58A, RG 58, RG 58B
SNAP
5413589-8
TE Connectivity's 5413589-8 BNC Connector features a 0.572" body diameter, polyethylene insulator, and nickel shell finish. Ideal for RF applications with characteristic impedance of 75 ohm, it operates b/w -55 to 85°C and supports cable types RG-179/U, RG-179A/U, RG-179B/U, and RG187/U.
APPLICABEL CABLE: RG-187A/U
RG-179/U; RG-179A/U; RG-179B/U; RG187/U
POLYETHYLENE
2 GHz
5221185-8
TE Connectivity's 5221185-8 BNC Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1.14 inch Body Depth. Ideal for RF applications with RG-59 cable types, this connector has a Bayonet Coupling Type and operates b/w -65 to 85 °C.
APPLICABLE CABLES: RG 179/U, RG 187/U
1.14 inch
.15 dB
ZINC ALLOY
2-5221128-1
TE Connectivity's 2-5221128-1 BNC Connector features 0.2 dB Insertion Loss, 50 ohm Impedance, and 4 GHz Operating Frequency. Ideal for RF applications, it has a Bayonet Coupling Type and Polyethylene Insulator Material. Suitable for cables like RG 316, RG 174, and RG 188 with Crimp Termination.
APPLICABLE CABLES: RG 174, RG 188, RG 188A, RG 316, INSERTION LOSS MAX AT 3 GHZ
RG 316, RG 174, RG 188
CPMC-78-18
Vertiv
Vertiv's CPMC-78-18 BNC Connector features gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications with 75 ohm impedance, male contact gender, and plug body style. Supports up to 2 GHz operating frequency for cable mounting in crimp/solder termination.
POLYMETHYLPENTENE
CRIMP/SOLDER
112134
Amphenol 112134 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It has a 50 ohm impedance and is suitable for RG-174/U cables in RF applications. The connector features a zinc alloy shell, gold mating contacts, and is designed for commercial reliability.
RG-174/U
ACETAL
112588
Amphenol 112588 is a RF BNC connector with gold finish, bayonet coupling, and PTFE insulator. Ideal for 75 ohm systems, it features crimp termination and right angle mounting for male contact gender in cable applications.
112491-11
Amphenol 112491-11 is a BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications, it features a brass shell with nickel finish. Suitable for commercial use in cable mounting with crimp termination.
112467
Amphenol 112467 is a BNC connector with gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 50 ohm impedance, male contact gender, and right-angle mounting on cables using crimp/solder termination.
1-1478152-0
TE Connectivity's 1-1478152-0 BNC Connector features 0.2 dB insertion loss, 75 ohm impedance, and 2 GHz max operating frequency. Ideal for RF applications, it has a bayonet coupling type and PTFE insulator material for reliable performance in cable installations.
1.2
1-1478402-0
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
APPLICABLE CABLES: RG 188A/U; RG316/U
1.028 inch
RG-174A/U
2-5329082-1
TE Connectivity's 2-5329082-1 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with RG58 cable types. Suitable for military use with MIL conformity and operating temperatures from -55°C to 85°C.
RG 58C, RG 58, RG 58B, RG 58A
POLYPROPYLENE
5225973-4
TE Connectivity's BNC Connector 5225973-4 features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with MIL conformity, it is a male plug connector suitable for RG 142 cables terminated via crimping.
APPLICABLE CABLES: RG 142/U; RG 142A/U; RG 142B/U
11_BNC-75-2-15/133_NE
Huber+suhner Ag
11_BNC-75-2-15/133_NE by Huber+suhner Ag is a BNC connector with gold termination, bayonet coupling, and brass shell. It has a characteristic impedance of 75 ohm and operates up to 1 GHz. Ideal for RF applications requiring reliable performance in commercial settings.
STANDARD: IEC 61169-8, APPLICABLE CABLES: RG 179_B/U, RG 187_A/U
.698 inch
RG-179B/U
PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE
1 GHz
.276 inch
5332225-5
TE Connectivity's 5332225-5 BNC Connector features Bayonet coupling, Polypropylene insulator, and Brass shell material. Ideal for RF applications up to 4 GHz with RG 108/A cables. Operating temperature range from -55°C to 85°C makes it suitable for various environments.
APPLICABLE CABLES: RG 108/U, RG 108A/U
RG 108, RG 108A
1-1337422-0
TE Connectivity's 1-1337422-0 BNC Connector features an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with a characteristic impedance of 75 ohm, this connector is durable with a durability of 500 cycles and operates b/w -65 to 165 °C.
.941 inch
RG-59B/U
PANEL
11_BNC-50-2-13/133_NE
11_BNC-50-2-13/133_NE by Huber+suhner Ag is a BNC Connector with gold-plated brass contacts, suitable for RG-174/U, RG-188A/U, and RG-316/U cables. It has a characteristic impedance of 50 ohms and operates up to 4 GHz. Ideal for commercial applications requiring reliable RF connections in the temperature range of -65°C to 165°C.
STANDARDS: IEC 60169-8; MIL-STD-348A/301, APPLICABLE CABLES: RG 136/U; RG 188A/U; RG 174/U
RG-174/U, RG-188A/U, RG-316/U
GOLD OVER NICKEL
SUCOPLATE
16_BNC-50-3-25/133_NE
16_BNC-50-3-25/133_NE by Huber+suhner Ag is a BNC Connector with Bayonet coupling, PTFE insulator, and brass shell. It has a characteristic impedance of 50 ohm, operates up to 4 GHz frequency, and withstands temperatures from -65 to 165°C. Ideal for RF applications requiring reliable connections in commercial settings.
STANDARDS: IEC 60169-8; MIL-STD-348A/301, APPLICABLE CABLE: RG 58C/U
1.061 inch
.57 inch
RG-58
POLYTETRAFLUORO ETHYLENE
1.17
1-1337432-0
TE Connectivity's 1-1337432-0 BNC Connector offers an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with characteristic impedance of 75 ohm, it is a durable connector suitable for commercial use up to 2 GHz frequency.
.582 inch
1337432
1-1337523-0
TE Connectivity's 1-1337523-0 is a BNC Connector with Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 1 GHz, it features a brass shell, nickel finish, and operates b/w -65°C to 165°C.
200050
Ava Electronics
The Ava Electronics 200050 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this twist-on connector with male contact is designed for cable mounting in straight configuration.
APPLICABLE CABLES:RG-6; BELDEN 8281
200
TWIST ON
R141009000
R141009000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. It features Bayonet Coupling for secure connections in RF applications up to 4 GHz frequency range. Ideal for cable mounting with PTFE insulator and male contact gender for reliable signal transmission.
APPLICABLE CABLES: RG 58; RG 141; RG 142
R141018000
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
APPLICABLE CABLES: RG 213; RG 393; RG 214, CAPTIVE CENTER CONTACT
R141156000
R141156000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, GOLD OVER NICKEL Termination Contact Finish, and BAYONET Coupling Type. Ideal for RF applications up to 4 GHz, this 50 ohm connector features POLYTETRAFLUOROETHYLENE insulator material and RIGHT ANGLE mounting style.
APPLICABLE CABLES: RG 58; RG 141; RG 142, CAPTIVE CENTER CONTACT
R141182000
R141182000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. It features Bayonet Coupling for RF applications up to 4 GHz, ideal for cable termination with right angle mounting in male plug configuration.
APPLICABLE CABLES: RG 58; RG 141, CAPTIVE CENTER CONTACT
73100-0016
Molex
Molex 73100-0016 RF BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 75 ohm impedance. Ideal for applications requiring a right angle plug with crimp solder termination on cables up to 4 GHz frequency.
APPLICABLE CABLES: RG 58; RG 62; RG 71
CRIMP SOLDER
R142004000
R142004000 by Radiall S A is a BNC Connector with 0.2 dB Insertion Loss, Gold (Au) - Nickel (Ni) Termination, and 1.3 VSWR. Ideal for RF applications up to 1.5 GHz, featuring Bayonet Coupling and PTFE Insulator for MIL and IEC conformity. Suitable for 75 ohm systems requiring male contact gender and cable mounting with clamp termination.
© 2023 All rights reserved
