Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
GRT155C80J224KE01J
Murata Manufacturing
Murata Manufacturing's GRT155C80J224KE01J is a ceramic capacitor with capacitance of 0.22uF, rated at 6.3V DC voltage. It has X6S temperature characteristics and operates b/w -55°C to 105°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
.22 uF
CERAMIC CAPACITOR
CERAMIC
.5 mm
1 mm
SURFACE MOUNT
Yes
10 %
2
105 Cel
-55 Cel
RECTANGULAR PACKAGE
SMT
TR, PAPER, 13 INCH
6.3 V
AEC-Q200
0402
X6S
22%
WRAPAROUND
GRT155C80J474KE01J
Murata Manufacturing's GRT155C80J474KE01J is a ceramic capacitor with 0.47uF capacitance, 6.3V rated DC voltage, and X6S temperature characteristics code. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact SMT package style.
.47 uF
T521T336M016ATE045
KEMET Corporation
KEMET T521T336M016ATE045 is a 33uF, 16V tantalum capacitor with low ESR of 45mohm. Ideal for SMT applications, it has Tan Delta of 0.08 and operates b/w -55 to +105 °C.
ESR AND RIPPLE CURRENT IS MEASURED AT 100KHZ
33 uF
TANTALUM CAPACITOR
TANTALUM (SOLID POLYMER)
45
1.1 mm
e3
0.0528
3.5 mm
20 %
TR, EMBOSSED PLASTIC, 7 INCH
POLARIZED
16 V
472.5
1411
0.08
MATTE TIN
J BEND
2.8 mm
T521X107M025ATE0307280
KEMET T521X107M025ATE0307280 is a 100uF, 25V tantalum capacitor with low Tan Delta of 0.1 and ESR of 30mohm. Ideal for applications requiring high ripple current handling up to 912.5mA, such as power supplies and filtering circuits in electronic devices.
100 uF
30
4 mm
0.25
7.3 mm
TR, EMBOSSED PLASTIC, 13 INCH
25 V
912.5
2917
0.1
4.3 mm
T543D475M063AHE075
KEMET T543D475M063AHE075 is a 4.7uF, 63V tantalum capacitor with low ESR of 75mohm and tan delta of 0.1. Ideal for SMT applications, it operates b/w -55 to 105 °C, suitable for high ripple current circuits like power supplies and voltage regulators.
4.7 uF
75
e0
.03
TR, 7 INCH
63 V
1732
TIN LEAD
UCV1E561MNL1GS
Nichicon
Nichicon UCV1E561MNL1GS is a 560uF, 25V aluminum electrolytic capacitor with tan delta of 0.14 and ripple current of 425mA. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and wide operating temperature range from -55°C to 105°C.
560 uF
ALUMINUM ELECTROLYTIC CAPACITOR
8 mm
ALUMINUM (WET)
10 mm
0.14
8.3 mm
TR, 15 INCH
425
3333
FLAT
ESH476M400AM7AA
ESH476M400AM7AA by KEMET is a 47uF aluminum electrolytic capacitor with 400V rated DC voltage. It features tan delta of 0.2, leakage current of 0.574mA, and ripple current of 265mA. Ideal for applications requiring high capacitance and voltage stability in a cylindrical package design for through-hole mounting.
47 uF
16 mm
0.574
25 mm
THROUGH HOLE MOUNT
-25 Cel
CYLINDRICAL PACKAGE
Radial
BULK
400 V
265
0.2
7.5 mm
WIRE
381LX153M063A052
Cornell Dubilier Electronics
381LX153M063A052 by Cornell Dubilier Electronics is a 15000uF, 63V aluminum electrolytic capacitor with 2.9163mA leakage current and 4900mA ripple current. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 105°C.
15000 uF
35 mm
24
2.9163
50 mm
-40 Cel
Snap-in
4900
TIN
SNAP-IN
ULD1J470MPD
Nichicon ULD1J470MPD is a 47uF, 63V aluminum electrolytic capacitor with tan delta of 0.17 and ripple current of 168mA. Ideal for through-hole mounting in applications requiring high capacitance and low leakage current.
0.02961
11.5 mm
168
0.17
RNE1C221MDN1KX
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 15 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
ESR IS MEASURED AT 100 KHZ
220 uF
ALUMINUM (SOLID POLYMER)
13
0.5
6 mm
15 V
415
EDH107M016A9GAA
The KEMET Corporation EDH107M016A9GAA is a 100uF, 16V aluminum electrolytic capacitor with tan delta of 0.2 and leakage current of 0.016mA. Ideal for surface mount applications in electronics requiring high ripple current handling capabilities up to 71mA.
6.3 mm
5.4 mm
0.016
6.6 mm
TR, PAPER, 15 INCH
71
2626
B43644E5477M000
TDK
The TDK B43644E5477M000 is a 470uF Aluminum Electrolytic Capacitor with 450V URdc. It features a Tan Delta of 0.2, Ripple Current of 2230mA, and ESR of 220mohm. Ideal for applications requiring high capacitance and voltage ratings in industrial electronics and power supplies.
470 uF
30 mm
220
450 V
2230
T550B756K075AH
KEMET T550B756K075AH is a TANTALUM CAPACITOR with 75uF capacitance, 75V URdc, and 0.05 Tan Delta. Ideal for applications requiring low leakage current (0.0422mA), high ripple current (158mA), and operating temperatures from -55 to 105°C.
ESR IS MEASURED AT 100 KHZ, RIPPLE CURRENT IS MEASURED AT 40KHZ
75 uF
7.34 mm
110
0.0422
17.42 mm
Axial
TRAY
75 V
158
0.05
T550B107K060AH42510100
KEMET T550B107K060AH42510100 is a 100uF, 60V Tantalum Capacitor with Tan Delta of 0.05 and ESR of 100mohm. Ideal for applications requiring high ripple current (166mA) and low leakage current (0.045mA), such as power supplies and audio equipment.
7.09 mm
100
0.045
16.51 mm
60 V
166
T550B107K060AH42520100
KEMET T550B107K060AH42520100 is a 100uF Tantalum Capacitor with 60V URdc, 0.05 Tan Delta, and 166mA Ripple Current. Ideal for applications requiring high reliability in temperatures ranging from -55°C to 105°C.
T550B107K060AH4252
KEMET T550B107K060AH4252 is a 100uF Tantalum Capacitor with 60V URdc. It features Tan Delta of 0.05, Leakage Current of 0.045mA, and Ripple Current of 166mA. Ideal for applications requiring high reliability in temperatures ranging from -55°C to 105°C.
T550B107K060AH0100
KEMET T550B107K060AH0100 is a 100uF Tantalum Capacitor with 60V URdc, 0.05 Tan Delta, and 166mA Ripple Current. Ideal for applications requiring high reliability in temperatures ranging from -55 to 105°C, such as power supplies and industrial equipment due to its low leakage current of 0.045mA.
T550B107K060AH42517200
KEMET T550B107K060AH42517200 is a TANTALUM CAPACITOR with 100uF capacitance, 60V URdc, and 0.05 Tan Delta. Ideal for applications requiring low leakage current (0.045mA), high ripple current (166mA), and operating temperatures from -55 to 105°C.
TR, 8.5 INCH
A750KK107M1EAAE040
KEMET A750KK107M1EAAE040 is a 100uF, 25V Aluminum Electrolytic Capacitor with 0.12 Tan Delta and 225mA Ripple Current. Ideal for applications requiring high capacitance and low ESR in temperatures ranging from -55 to 105°C, such as power supplies and industrial electronics.
40
225
0.12
A765MU567M1CLAE018
A765MU567M1CLAE018 by KEMET is a 560uF, 16V aluminum electrolytic capacitor with ESR of 18mohm. Ideal for SMT applications, it has a leakage current of 1.792mA and ripple current of 210mA. Suitable for various electronic devices requiring stable capacitance and low ESR.
ESR IS MEASURED AT 100KHZ
18
12.6 mm
1.792
10.3 mm
210
4141
UHW1J222MHD
The Nichicon UHW1J222MHD is a 2200uF, 63V aluminum electrolytic capacitor with tan delta of 0.11 and leakage current of 1.386mA. Ideal for applications requiring high ripple current handling such as power supplies and audio amplifiers due to its radial package style and through hole mounting feature.
2200 uF
18 mm
1.386
40 mm
2895
0.11
UHW1J681MHD6
Nichicon UHW1J681MHD6 is a 680uF, 63V aluminum electrolytic capacitor with tan delta of 0.09 and leakage current of 0.4284mA. Ideal for applications requiring high ripple current handling, such as power supplies and audio amplifiers due to its radial package style and through hole mounting feature.
680 uF
0.4284
20 mm
1428
0.09
UHW1J821MHD
Nichicon UHW1J821MHD is a 820uF, 63V aluminum electrolytic capacitor with tan delta of 0.09 and ripple current of 1824mA. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 105°C.
820 uF
12.5 mm
0.5166
35.5 mm
1824
5 mm
UHW1K182MHD
Nichicon UHW1K182MHD is a 1800uF, 80V Aluminum Electrolytic Capacitor with Tan Delta of 0.09 and Ripple Current of 2316mA. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 105°C.
1800 uF
1.44
80 V
2316
UHW2A271MHD
Nichicon UHW2A271MHD is a 270uF, 100V Aluminum Electrolytic Capacitor with 0.08 Tan Delta and 0.27mA Leakage Current. Ideal for applications requiring high ripple current handling up to 1200mA, such as power supplies and audio equipment due to its compact radial package style.
270 uF
0.27
30.5 mm
100 V
1200
UHW2A391MHD
Nichicon UHW2A391MHD is a 390uF, 100V aluminum electrolytic capacitor with tan delta of 0.08 and leakage current of 0.39mA. Ideal for applications requiring high ripple current handling up to 1300mA, such as power supplies and industrial electronics.
390 uF
0.39
1300
UHW2A471MHD6
Nichicon UHW2A471MHD6 is a 470uF, 100V aluminum electrolytic capacitor with tan delta of 0.08 and leakage current of 0.47mA. Ideal for applications requiring high ripple current handling up to 1250mA, such as power supplies and industrial electronics due to its through hole mounting feature and wide operating temperature range from -40°C to 105°C.
0.47
1250
UHW2A681MHD6
Nichicon UHW2A681MHD6 is a 680uF, 100V Aluminum Electrolytic Capacitor with Tan Delta of 0.08 and Leakage Current of 0.68mA. Ideal for applications requiring high ripple current handling up to 1716mA, such as power supplies and industrial electronics due to its radial package style and through hole mounting feature.
0.68
1716
B32778J0207K000
B32778J0207K000 by TDK is a film capacitor with 200uF capacitance and 1100V rated DC voltage. It has a negative tolerance of 10% and operates b/w -40 to 105°C. Ideal for PCB mounting applications due to its bulk packaging and through-hole mount feature.
200 uF
FILM CAPACITOR
POLYPROPYLENE
58 mm
57.5 mm
12
PCB Mount
Bulk
1100 V
130 mm
B32778J1127K000
The TDK B32778J1127K000 is a film capacitor with a capacitance of 120 uF and a rated DC voltage of 1300 V. It has a max operating temperature of 105°C and a min operating temperature of -40°C. This capacitor is commonly used in PCB mount applications requiring high capacitance and voltage tolerance.
120 uF
1300 V
R75MW51004030J
R75MW51004030J by KEMET: 10uF film capacitor with 400V DC, -55 to 105°C operating temp, and 5% tolerance. Ideal for applications requiring high capacitance and voltage stability in industrial electronics.
10 uF
4.8
44 mm
41.5 mm
5 %
220 V
-200+/-100ppm/Cel
Tin (Sn)
37.5 mm
24 mm
R60DR54705050K
R60DR54705050K by KEMET is a 47uF film capacitor with 63V DC voltage rating. It has a negative/positive tolerance of 10% and operates b/w -55°C to 105°C. Ideal for applications requiring fixed capacitors in through-hole mounting setups.
POLYETHYLENE TEREPHTHALATE
37 mm
32 mm
40 V
27.5 mm
22 mm
R60DW6100AA50K
The R60DW6100AA50K by KEMET Corporation is a fixed capacitor with a capacitance of 100 uF and rated DC voltage of 63 V. It has a negative tolerance of 10% and positive tolerance of 10%. The capacitor is made of POLYETHYLENE TEREPHTHALATE dielectric material and has a rated AC voltage of 40 V. It can operate in temperatures ranging from -55 to 105 °C. The capacitor is designed with a radial package style and through hole mount for easy installation. Its compact dimensions of 41.5 mm length, 20 mm width, and 40 mm height make it suitable for various applications.
EDH108M025S9RAA
KEMET Corporation's EDH108M025S9RAA is a 1000uF aluminum electrolytic capacitor with 25V URdc. It features tan delta of 0.26, leakage current of 0.25mA, and ripple current of 510mA. Ideal for applications requiring polarized capacitors in automotive electronics meeting AEC-Q200 standards.
1000 uF
13.5 mm
12.8 mm
510
5050
0.26
EDH108M050S9TAA
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
16.5 mm
17 mm
50 V
800
6767
0.18
EDH336M100S9MAA
The KEMET Corporation EDH336M100S9MAA is a 33uF aluminum electrolytic capacitor with 100V rated DC voltage. It has a tan delta of 0.18, leakage current of 0.033mA, and ripple current of 120mA. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 105°C.
10.2 mm
0.033
120
EDH476M050S9MAA
The KEMET Corporation EDH476M050S9MAA is a 47uF aluminum electrolytic capacitor with a rated DC voltage of 50V. It features a tan delta of 0.12, leakage current of 0.0235mA, and ripple current of 210mA. Ideal for applications requiring high capacitance and reliability in automotive electronics due to AEC-Q200 reference standard compliance.
0.0235
EDH476M100S9PAA
KEMET Corporation's EDH476M100S9PAA is a 47uF aluminum electrolytic capacitor with 100V URdc. It features tan delta of 0.18, leakage current of 0.047mA, and ripple current of 170mA. Ideal for automotive applications due to AEC-Q200 reference standard compliance and -40 to 105°C operating temperature range.
0.047
170
EEV475M035S9BAA
EEV475M035S9BAA by KEMET: 4.7uF ALUMINUM ELECTROLYTIC CAPACITOR with 35V URdc, -55 to 105 °C operating temp, and 0.12 Tan Delta. Ideal for automotive applications meeting AEC-Q200 standard.
0.003
35 V
63
1717
ALS80A103DB063
The KEMET Corporation ALS80A103DB063 is a 10000uF, 63V aluminum electrolytic capacitor with 1.89mA leakage current and 8200mA ripple current. Ideal for chassis mount applications in electronics, it has a diameter of 36mm and length of 62mm, meeting IEC60384-4 standards.
10000 uF
36 mm
43
1.89
62 mm
CHASSIS MOUNT
Chassis Mount
IEC60384-4
8200
FEMALE THREADED
ALS80A162KF500
KEMET Corporation's ALS80A162KF500 is a 1600uF Aluminum Electrolytic Capacitor with 500V URdc. It features 2.4mA Leakage Current, 6800mA Ripple Current, and -40 to 105 °C operating temperature range. Ideal for chassis mount applications requiring high capacitance and voltage ratings.
1600 uF
51 mm
142
2.4
105 mm
500 V
6800
ALS80A184KF025
KEMET Corporation's ALS80A184KF025 is a 180000uF aluminum electrolytic capacitor with 25V URdc. It features 6mA leakage current, 17600mA ripple current, and -40 to 105 °C operating temperature range. Ideal for chassis mount applications requiring high capacitance and voltage tolerance.
180000 uF
6
17600
ALS80A393DB025
The KEMET Corporation ALS80A393DB025 is a 39000uF aluminum electrolytic capacitor with 25V URdc. It features a leakage current of 2.925mA, ripple current of 9800mA, and ESR of 38mohm. Ideal for chassis mount applications in electronics requiring high capacitance and voltage tolerance up to -40°C to 105°C.
39000 uF
38
2.925
9800
ALS80A431DA400
The KEMET Corporation ALS80A431DA400 is a 430uF aluminum electrolytic capacitor with 400V rated DC voltage. It features a leakage current of 0.516mA, ripple current of 2600mA, and ESR of 308mohm. Ideal for chassis mount applications in electronics requiring high capacitance and voltage tolerance up to 105°C operating temperature.
430 uF
308
0.516
52 mm
2600
APMA200ARA470MF30S
Nippon Chemi-con
APMA200ARA470MF30S by Nippon Chemi-con is a 47uF, 20V ALUMINUM ELECTROLYTIC CAPACITOR with Tan Delta of 0.12 and Ripple Current of 100mA. Ideal for SMT applications due to its compact size (7x7x3mm) and low ESR value of 50mohm, ensuring reliable performance in various electronic devices.
ESR IS MEASURED AT 100 KHZ-300 KHZ
50
3 mm
7 mm
Tape
20 V
2828
L BEND
ELHS501VSN471MA50S
ELHS501VSN471MA50S by Nippon Chemi-con is a 470uF, 500V aluminum electrolytic capacitor with tan delta of 0.2 and leakage current of 1.4543mA. Ideal for applications requiring high ripple current handling up to 1950mA, such as power supplies and industrial electronics.
1.4543
1950
EEUFS0J562
Panasonic
Panasonic EEUFS0J562 is a 5600uF, 6.3V Aluminum Electrolytic Capacitor with 2552mA ripple current. It has a tan delta of 0.32 and operates b/w -40 to 105°C. Ideal for applications requiring high capacitance and low leakage current in bulk packaging with radial terminals.
5600 uF
0.3528
2552
0.32
160BXC33MEFC10X20
Rubycon
Rubycon 160BXC33MEFC10X20 is a 33uF, 160V aluminum electrolytic capacitor with tan delta of 0.15 and ripple current of 260mA. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -25 to 105°C.
0.3112
160 V
260
0.15
© 2023 All rights reserved
