Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
PHC1604470KN
Icel Srl
PHC1604470KN by Icel Srl is a 4.7uF film capacitor with POLYPROPYLENE dielectric, rated for 330V AC and 600V DC. With axial package style, it operates b/w -40°C to 85°C, suitable for applications requiring high voltage tolerance and reliability.
STANDARD: IEC60068
4.7 uF
FILM CAPACITOR
27 mm
POLYPROPYLENE
44 mm
THROUGH HOLE MOUNT
10 %
2
85 Cel
-40 Cel
Axial
330 V
600 V
IEC61071
WIRE
PHC1404500KN
PHC1404500KN by Icel Srl is a 5uF film capacitor with 10% tolerance, rated for 250V AC and 400V DC. With POLYPROPYLENE dielectric material, it operates b/w -40°C to 85°C. Ideal for applications requiring reliable capacitors in axial package style with through hole mount.
5 uF
20.5 mm
250 V
400 V
R76QF18205050J
KEMET Corporation
R76QF18205050J by KEMET Corp is a film capacitor with capacitance of 0.0082 uF, rated DC voltage of 1000 V, and ripple current of 1900 mA. It is used in automotive applications due to AEC-Q200 standard compliance and can operate b/w -55 to 110 °C.
.0082 uF
78
11 mm
e3
13 mm
5 %
110 Cel
-55 Cel
Radial
BULK
1000 V
AEC-Q200
1900
TIN
10 mm
5 mm
R76QN32205050J
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
.22 uF
11
20 mm
26.5 mm
7400
22.5 mm
R75QN35605000J
R75QN35605000J by KEMET: POLYPROPYLENE film capacitor with 0.56 uF capacitance, 250V AC voltage rating, and AEC-Q200 standard. Ideal for THROUGH HOLE MOUNT applications in automotive electronics due to -55 to 105 °C operating range.
.56 uF
29.5 mm
105 Cel
14.5 mm
C4AQJBU4700M1YJ
C4AQJBU4700M1YJ by KEMET Corp is a 7uF film capacitor with 700V URdc. It has -55 to 105°C temp range, POLYPROPYLENE dielectric, and AEC-Q200 compliance. Ideal for automotive electronics due to its high voltage rating and wide operating temperature range.
7 uF
28 mm
31.5 mm
TRAY
700 V
AEC-Q200; EN; IEC; VDE
27.5 mm
14 mm
C4AQJEW6110M3AJ
C4AQJEW6110M3AJ by KEMET Corp is a 110uF film capacitor with 5% tolerance, rated at 700V. Ideal for PCB mounting, it operates b/w -55 to 105°C and complies with AEC-Q200, EN, IEC, VDE standards.
110 uF
56 mm
57.5 mm
4
PCB Mount
45 mm
C4AQLBW5400M3FK
C4AQLBW5400M3FK by KEMET is a 40uF film capacitor with ±10% tolerance, rated at 500V. It operates b/w -55°C to 105°C and complies with AEC-Q200, EN, IEC, VDE standards. Ideal for PCB mounting in automotive electronics due to its polypropylene dielectric material and through-hole mount feature.
40 uF
40 mm
42 mm
500 V
C4AQOBW5250M3LJ
C4AQOBW5250M3LJ by KEMET Corp is a 25uF film capacitor with 900V URdc. It has -55 to 105 °C operating temp range and 5% tolerance. Ideal for PCB mount applications in automotive electronics meeting AEC-Q200, EN, IEC, VDE standards.
25 uF
900 V
30 mm
C4AQOEW5800M3BJ
C4AQOEW5800M3BJ by KEMET Corp is a POLYPROPYLENE film capacitor with 80uF capacitance, 900V URdc, and -55 to 105°C operating range. Ideal for PCB mounting in automotive applications meeting AEC-Q200 standards.
80 uF
65 mm
C4AQPBW5250M3NJ
C4AQPBW5250M3NJ by KEMET is a 25uF film capacitor with 1200V URdc. It has a -55 to 105°C operating range and ±5% tolerance. Ideal for PCB mounting, it meets AEC-Q200 standards and is commonly used in automotive electronics.
50 mm
1200 V
35 mm
C4AQPLU4110M11J
C4AQPLU4110M11J by KEMET is a 1.1uF film capacitor with 1200V URdc, ideal for AEC-Q200 applications. Featuring POLYPROPYLENE dielectric material, it has a ripple current of 4400mA and ESR of 28.9mohm. This through-hole mount component operates b/w -55°C to 105°C, making it suitable for automotive electronics.
ESR AND RIPPLE CURRENT IS MEASURED AT 10KHZ AND 70 CEL
1.1 uF
28.9
12.5 mm
32 mm
4400
21 mm
C4AQJBW5500M3OJ
C4AQJBW5500M3OJ by KEMET is a 50uF film capacitor with 5% tolerance, rated at 700V. It operates b/w -55 to 105°C and is ideal for PCB mounting in automotive applications meeting AEC-Q200 standards.
50 uF
C4AQLBW5500M3JK
C4AQLBW5500M3JK by KEMET is a 50uF film capacitor with 500V URdc. It has -55 to 105°C operating temperature range and ±10% tolerance. Ideal for PCB mounting applications in automotive, industrial, and electronic devices requiring reliable performance.
37 mm
C4AQPBU4220M1YJ
C4AQPBU4220M1YJ by KEMET Corp is a 2.2uF film capacitor with 1200V URdc, -55 to 105 °C temp range, and 5% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it features polypropylene dielectric in radial package style for through-hole mounting.
2.2 uF
C4AQPBU4330M11J
C4AQPBU4330M11J by KEMET is a 3.3uF film capacitor with 1200V URdc, suitable for AEC-Q200 applications. Featuring POLYPROPYLENE dielectric, it has a -55 to 105 °C operating range and radial package style for through-hole mounting. Ideal for automotive electronics due to its high voltage rating and reliability standards compliance.
3.3 uF
29 mm
19 mm
C4AQIEW6100M3BJ
C4AQIEW6100M3BJ by KEMET Corp is a PCB mount film capacitor with 100uF capacitance, 800V URdc, and -55 to 105°C operating range. Ideal for automotive applications meeting AEC-Q200 standards.
100 uF
800 V
C4AQLEW6180M3AK
C4AQLEW6180M3AK by KEMET Corp is a POLYPROPYLENE film capacitor with 180uF capacitance and 500V URdc. It has -55 to 105 °C operating temp range, suitable for PCB mount applications in automotive electronics due to AEC-Q200 compliance.
180 uF
C4AQNBU4400M18J
C4AQNBU4400M18J by KEMET: 4uF Film Capacitor with 5% Tolerance, 1000V URdc. Ideal for automotive applications due to AEC-Q200 compliance and -55°C to 105°C operating range. Features POLYPROPYLENE dielectric material in radial package style for through-hole mounting.
4 uF
16 mm
C4AQNEW5330M3CJ
C4AQNEW5330M3CJ by KEMET Corp is a 33uF film capacitor with ±5% tolerance, rated at 1000V. It operates b/w -55°C to 105°C, ideal for PCB mounting in automotive applications meeting AEC-Q200 standards.
33 uF
57 mm
38 mm
C4AQOBU4700M1EJ
C4AQOBU4700M1EJ by KEMET Corp is a 7uF film capacitor with ±5% tolerance, rated at 900V. It operates b/w -55°C to 105°C, ideal for AEC-Q200 automotive applications. With polypropylene dielectric and radial package style, it's designed for through-hole mounting in various electronic systems.
33 mm
18 mm
C4AQOBU5100M12J
C4AQOBU5100M12J by KEMET: 10uF film capacitor with 5% tolerance, rated at 900V. Ideal for automotive applications due to AEC-Q200 compliance and wide operating temperature range (-55 to 105°C). Features radial package style and through-hole mounting for easy installation.
10 uF
22 mm
MKP2F033301M00KA00
Wima & Kg
Wima & Kg's MKP2F033301M00KA00 is a POLYPROPYLENE film capacitor with 0.33 uF capacitance, suitable for AEC-Q200 standards. It has 160V AC and 250V DC ratings, -55 to 100 °C operating temp range, and wire terminals for through-hole mounting applications.
.33 uF
7.2 mm
100 Cel
AMMO PACK
160 V
8.5 mm
R474N333050A1KV057
KEMET Corporation's R474N333050A1KV057 is a POLYPROPYLENE film capacitor with 0.33uF capacitance, rated for 440V AC and 1000V DC. It has a terminal pitch of 22.5mm, through-hole mounting feature, and meets AEC-Q200, ENEC, CUL, UL standards. Ideal for applications requiring high voltage tolerance in automotive electronics and industrial equipment.
CLASS X1, STANDARD: IEC60384-14
440 V
AEC-Q200; ENEC; CUL; UL
MKX2AW26803H00KJ00
MKX2AW26803H00KJ00 by Wima & Kg is a film capacitor with 0.068 uF capacitance, rated for 560V DC and 305V AC. With a temperature range of -55 to 105 °C, it's ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
.068 uF
TR, 20 INCH
305 V
560 V
6 mm
B32923C3155M289
TDK
B32923C3155M289 by TDK is a 1.5uF film capacitor with rated DC voltage of 630V and rated AC voltage of 305V. It features polypropylene dielectric material, -40 to 110°C operating temperature range, and through hole mounting. Ideal for applications requiring high capacitance stability and reliability under varying temperatures.
SAFETY CLASS X2
1.5 uF
20 %
630 V
IEC60384-14
12 mm
ECWFG60126JA
Panasonic
Panasonic ECWFG60126JA is a 12uF film capacitor with 600V rated DC voltage. It has a negative/positive tolerance of 5% and operates b/w -40 to 110°C. Ideal for AEC-Q200 applications, it features polypropylene dielectric material, radial package style, and wire terminal shape.
12 uF
32.5 mm
17.5 mm
ECWFG60405JA
Panasonic ECWFG60405JA is a 4uF film capacitor with 600V URdc. It has a temperature range of -40 to 110°C, suitable for AEC-Q200 automotive applications. With POLYPROPYLENE dielectric and radial package style, it offers high reliability in through-hole mounting setups.
10.5 mm
MKP1837-322-011-D
Vishay Intertechnology
Vishay Intertechnology's MKP1837-322-011-D is a film capacitor with 0.022 uF capacitance and 100 V rated DC voltage. It has a negative tolerance of 1% and operates b/w -55 to 100 °C. Ideal for applications requiring POLYPROPYLENE dielectric material, such as power supplies and industrial electronics.
.022 uF
1 %
100 V
Tin (Sn)
PWS2102470KJ
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 100 Cel; Dielectric Material: POLYPROPYLENE;
.047 uF
IEC60384-13
PWS2101470KD
PWS2101470KD by Icel Srl is a film capacitor with 0.0047 uF capacitance, rated for 1000V DC and 400V AC. With POLYPROPYLENE dielectric material, it operates b/w -55 to 100 °C, suitable for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
.0047 uF
8 mm
PWS2102680KJ
PWS2102680KJ by Icel Srl is a 0.068 uF film capacitor with 2 terminals, rated for 400V AC and 1000V DC. With POLYPROPYLENE dielectric material, it operates b/w -55 to 100 °C, meeting IEC60384-13 standard. Ideal for applications requiring high voltage tolerance and reliability in through-hole mounting setups.
15 mm
ALH106K401C064
Cornell Dubilier Electronics
ALH106K401C064 by Cornell Dubilier Electronics is a 10uF film capacitor with 400V AC and 760V DC ratings. It has a ripple current of 14000mA, ESR of 6.9mohm, and operates b/w -40 to 105 °C. Ideal for PCB mounting in automotive applications meeting AEC-Q200 and IEC61071 standards.
ESR IS MEASURED AT 10KHZ, RIPPLE CURRENT IS MEASURED AT 10KHZ AND 70CEL
6.9
760 V
AEC-Q200; IEC61071
14000
SNFPX034708L3DMS00
SNFPX034708L3DMS00 by Wima & Kg is a film capacitor with 0.47 uF capacitance, rated for 700V AC and 4000V DC. It features polypropylene dielectric material, chassis mount package style, and lug terminal shape. Ideal for applications requiring high voltage tolerance and reliability in harsh environments.
.47 uF
54 mm
CHASSIS MOUNT
Chassis Mount
4000 V
LUG
SNFPX034708L3OKS00
SNFPX034708L3OKS00 by Wima & Kg is a film capacitor with a capacitance of 0.47 uF and rated AC voltage of 700 V. It is used for chassis mount applications, has a max operating temperature of 105 °C, and meets the AEC-Q200 standard.
SNFPX034708LD4KSSD
SNFPX034708LD4KSSD by Wima & Kg is a film capacitor with 0.47 uF capacitance, rated for 700V AC and 4000V DC. It has a temperature range of -55 to 105 °C and is ideal for PCB mounting applications requiring high voltage tolerance.
SNFPX034708L3DKS00
SNFPX034708L3DKS00 by Wima & Kg is a POLYPROPYLENE film capacitor with 0.47 uF capacitance, rated for 700V AC and 4000V DC. It features chassis mount package style, LUG terminals, and operates b/w -55 to 105 °C. Ideal for AEC-Q200 applications requiring high voltage tolerance and reliability.
DCP4R251007LD2KSSD
DCP4R251007LD2KSSD by Wima & Kg is a 10uF film capacitor with 10% tolerance, rated for 1300V. It operates b/w -55 to 105°C, suitable for AEC-Q200 standards in automotive applications. With POLYPROPYLENE dielectric and TRAY packing, it's ideal for through-hole mounting.
41.5 mm
1300 V
37.5 mm
SNFPX034708LD4JSSD
SNFPX034708LD4JSSD by Wima & Kg is a film capacitor with a capacitance of 0.47 uF and rated AC voltage of 700 V. It is used in PCB mount applications and has a max operating temperature of 105 °C.
C44UQGT6910M31K
C44UQGT6910M31K by KEMET Corp is a 910uF film capacitor with 1100V URdc. It has a ripple current of 60000mA and ESR of 0.85mohm, suitable for applications requiring high capacitance and voltage tolerance in industrial electronics.
ESR IS MEASURED AT 10KHz, RIPPLE CURRENT IS MEASURED AT 10KHz, 40DEG CEL
910 uF
136 mm
0.85
131 mm
STUD MOUNT
CAN
1100 V
60000
FEMALE THREADED
C44UOGT7274M32K
C44UOGT7274M32K by KEMET Corp is a 2740uF film capacitor with 900V URdc. It has a ripple current of 100000mA and operates b/w -40 to 85°C. Ideal for applications requiring high capacitance and voltage, such as power supplies and industrial electronics.
2740 uF
1
232 mm
100000
MKP1O112203C00JF00
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .0022 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: POLYPROPYLENE;
.0022 uF
9 mm
TR, 14 INCH
4 mm
MKP1O112203C00KB00
MKP1O112203C00KB00 by Wima & Kg is a film capacitor with 0.0022 uF capacitance, rated for 1000V DC and 600V AC. It has a through hole mount feature, radial package style, and is made of polypropylene. Ideal for applications requiring high voltage tolerance and reliability in automotive electronics meeting AEC-Q200 standards.
MKP1O112203C00KI00
MKP1O112203C00KI00 by Wima & Kg is a POLYPROPYLENE film capacitor with 0.0022 uF capacitance, rated for 600V AC and 1000V DC. It has through hole mount feature, AEC-Q200 standard compliance, and is ideal for automotive applications due to its high temperature range (-55 to 105 °C) and compact size (13x4x9 mm).
MKP1O112203C00JI00
MKP1O112203C00JI00 by Wima & Kg is a film capacitor with capacitance of 0.0022 uF and rated DC voltage of 1000 V. It has a max operating temperature of 105°C, making it suitable for applications requiring high voltage tolerance and reliability in harsh environments. With a package style of Radial and through hole mounting feature, it is commonly used in automotive electronics adhering to AEC-Q200 standards.
MKP1F032204D00JF00
MKP1F032204D00JF00 by Wima & Kg is a film capacitor with capacitance of 0.22uF, rated DC voltage of 250V, and rated AC voltage of 180V. It is ideal for applications requiring stable performance in temperatures ranging from -55°C to 105°C, such as automotive electronics due to AEC-Q200 reference standard compliance.
180 V
7 mm
MKP1U011003C00JI00
MKP1U011003C00JI00 by Wima & Kg is a film capacitor with 0.001 uF capacitance, 700V URac, and 2000V URdc. It is used in AEC-Q200 applications for its POLYPROPYLENE dielectric material and -55 to 105 °C operating temperature range.
.001 uF
2000 V
MKP1U014704B00JJ00
MKP1U014704B00JJ00 by Wima & Kg is a film capacitor with capacitance of 0.0047 uF and rated DC voltage of 2000 V. It has a max operating temperature of 105°C, making it suitable for applications requiring high voltage tolerance and reliability in harsh environments. With a package style of radial and through hole mounting feature, it is commonly used in automotive electronics meeting AEC-Q200 standards.
© 2023 All rights reserved
