Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TLCL105M025XTA
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
ESR AND RIPPLE CURRENT IS MEASURED AT 100KHZ
1 uF
TANTALUM CAPACITOR
TANTALUM (DRY/SOLID)
7500
.85 mm
e3
0.0005
1.6 mm
SURFACE MOUNT
20 %
2
125 Cel
-55 Cel
RECTANGULAR PACKAGE
SMT
TR, PLASTIC, 4.25 INCH
POLARIZED
25 V
23
0603
Matte Tin (Sn)
WRAPAROUND
940C10W1K-F
Cornell Dubilier Electronics
The Cornell Dubilier Electronics 940C10W1K-F is a film capacitor with 1uF capacitance, rated for 1000V DC and 500V AC. It features a tubular package shape, axial style, and wire terminals suitable for through-hole mounting. With a ripple current of 12500mA and operating temperatures from -55°C to 105°C, it's ideal for high-performance applications requiring reliable energy storage.
RIPPLE CURRENT IS MEASURED AT 100KHZ AND 70CEL
FILM CAPACITOR
26 mm
POLYPROPYLENE
5
46 mm
THROUGH HOLE MOUNT
10 %
105 Cel
TUBULAR PACKAGE
Axial
500 V
1000 V
12500
TIN
WIRE
940C8W1K-F
940C8W1K-F by Cornell Dubilier Electronics is a film capacitor with 1uF capacitance, rated for 850V DC and 450V AC. Featuring a tubular package shape, it has a ripple current of 11500mA and operates b/w -55°C to 105°C. Ideal for applications requiring high voltage tolerance and low ESR in through-hole mounting setups.
22.5 mm
450 V
850 V
11500
BFC233922105
Vishay Intertechnology
Vishay Intertechnology's BFC233922105 is a film capacitor with a capacitance of 1 uF and rated DC voltage of 630 V. It has a rectangular package shape, through-hole mounting feature, and is suitable for applications requiring a rated AC voltage of 310 V.
19.5 mm
110 Cel
Radial
BULK
310 V
630 V
AEC-Q200; CSA; CQC; CUL; EN; IEC60384-14; UL
Tin (Sn)
10 mm
SK052C105KAR
SK052C105KAR by KYOCERA AVX is a ceramic capacitor with 1uF capacitance and 200V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for through-hole mounting applications requiring high capacitance stability in compact spaces.
CERAMIC CAPACITOR
CERAMIC
12.7 mm
Yes
200 V
X7R
15%
10.2 mm
5.08 mm
SK597C105KAR
SK597C105KAR by KYOCERA AVX is a ceramic capacitor with 1uF capacitance and 500V rated DC voltage. With X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for applications requiring high reliability and stability in harsh environments.
13.7 mm
17 mm
14.6 mm
170105J400VF
170105J400VF by Cornell Dubilier Electronics is a film capacitor with 1uF capacitance and rated for 400V DC voltage. It has a tubular package shape, axial style, and wire terminals. Ideal for applications requiring high temperature tolerance up to 105°C, such as industrial electronics and power supplies.
RATED AC VOLTAGE (V): 220
33 mm
170
5 %
Bulk
220 V
400 V
0402X105M6R3CT
Walsin Technology
0402X105M6R3CT by Walsin Technology is a ceramic capacitor with 1uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
.5 mm
1 mm
85 Cel
TR, PAPER, 7 INCH
6.3 V
0402
X5R
Matte Tin (Sn) - with Nickel (Ni) barrier
UPW2W010MPD
Nichicon
Nichicon UPW2W010MPD is a 1uF aluminum electrolytic capacitor with 450V URdc. It has a tan delta of 0.25 and leakage current of 0.085mA, suitable for AEC-Q200 applications requiring high ripple current handling up to 18mA in cylindrical package style.
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM (WET)
.085
12.5 mm
-25 Cel
CYLINDRICAL PACKAGE
AEC-Q200
18
0.25
5 mm
MMP6W1K-F
MMP6W1K-F by Cornell Dubilier Electronics is a 1uF film capacitor with a rated DC voltage of 630V. With a negative and positive tolerance of 10%, it operates b/w -55°C to 125°C. This rectangular package, axial capacitor is ideal for applications requiring reliable performance in various electronic circuits.
POLYESTER
13 mm
39 mm
22 mm
R76PR41004030J
KEMET Corporation
R76PR41004030J by KEMET Corp is a 1uF film capacitor with 400V AC and 630V DC ratings. It features POLYPROPYLENE dielectric, 12500mA ripple current, and -55 to 110°C operating temp. Ideal for applications requiring high capacitance stability in rectifier circuits or power supplies.
5.6
32 mm
TRAY
27.5 mm
18 mm
R76QW41004030J
KEMET Corporation's R76QW41004030J is a 1uF film capacitor with 600V AC and 1000V DC ratings. It features a ripple current of 13800mA, ESR of 5.6mohm, and -55 to 110°C operating temperature range. Ideal for applications requiring high voltage tolerance and low ESR in through-hole mounting setups.
ESR IS MEASURED AT 100KHZ, RIPPLE CURRENT IS MEASURED AT 100KHZ AND 85CEL
40 mm
41.5 mm
Tray
600 V
13800
-200+/-100ppm/Cel
37.5 mm
20 mm
R76TW4100SE30K
R76TW4100SE30K by KEMET Corporation is a rectangular package film capacitor with a capacitance of 1 uF and rated DC voltage of 1600 V. It has a max operating temperature of 110°C and low equivalent series resistance (ESR) of 5.6 mohm, making it suitable for high-power applications in various industries.
44 mm
650 V
1600 V
14400
24 mm
R75IN41004040J
R75IN41004040J by KEMET is a 1uF film capacitor with 160V AC and 250V DC ratings. It has a negative tolerance of 5% and operates b/w -55°C to 105°C. Ideal for AEC-Q200 applications, it features POLYPROPYLENE dielectric, radial package style, and through-hole mounting.
8
16 mm
26.5 mm
160 V
250 V
7 mm
R75PR41004030J
KEMET Corporation's R75PR41004030J is a 1uF film capacitor with 630V DC and 250V AC ratings. Featuring POLYPROPYLENE dielectric, it has -55 to 105 °C operating temp range and -200+/-100ppm/°C temp coef. Ideal for applications requiring high capacitance stability in through-hole mounting setups.
MKP1848C51012JK2
Vishay Intertechnology's MKP1848C51012JK2 is a 1uF film capacitor with ±5% tolerance, rated for 1200V. It uses polypropylene dielectric material and operates b/w -55°C to 105°C. Ideal for applications requiring high voltage and stable capacitance in through-hole mounting setups.
STANDARD: IEC60068
21 mm
1200 V
IEC61071
11 mm
UMJ212CB7105MGHT
Taiyo Yuden
UMJ212CB7105MGHT by Taiyo Yuden is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 125°C.
1.25 mm
2 mm
TR, EMBOSSED, 7 INCH
50 V
0805
0.1
GRT155R6YA105KE13J
Murata Manufacturing
Murata Manufacturing's GRT155R6YA105KE13J is a ceramic capacitor with 1uF capacitance, rated for 35V. It has X5R temperature characteristics and operates b/w -55°C to 85°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
TR, PAPER, 13 INCH
35 V
TIN OVER NICKEL
TAZE105K050LRSC0H45
KYOCERA AVX TAZE105K050LRSC0H45 is a 1uF TANTALUM CAPACITOR with 50V URdc. It features Tan Delta of 0.06, Leakage Current of 0.001mA, and Ripple Current of 90mA. Ideal for applications requiring high reliability in a compact SMT package with -55 to 125 °C operating temperature range.
1700
1.27 mm
e0
0.001
TR, 7 INCH
90
2010
0.06
TIN LEAD
J BEND
2.54 mm
C0805C105K8RACAUTO7210
KEMET C0805C105K8RACAUTO7210 is a 1uF ceramic capacitor with X7R temp. characteristics, -55 to 125°C operating range, and 10% tolerance. Ideal for automotive applications due to AEC-Q200 standard compliance, SMT package style, and 10V rated DC voltage.
.9 mm
TR, PUNCHED PAPER, 13 INCH
10 V
C1206C105J4RAC7210
KEMET C1206C105J4RAC7210 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 125°C. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
1.2 mm
3.2 mm
TR, EMBOSSED PLASTIC, 13 INCH
16 V
1206
MATTE TIN OVER NICKEL
SR305C105KARAP1
SR305C105KARAP1 by KYOCERA AVX is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for through-hole mounting applications requiring high reliability and stable performance in various electronic circuits.
7.62 mm
AMMO PACK
3.81 mm
C2220C105MCR2L7186
KEMET C2220C105MCR2L7186 is a ceramic capacitor with 1uF capacitance and 500V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and J bend terminals for SMT mounting. Ideal for applications requiring high capacitance stability in a compact size.
6 mm
TR, Embossed Plastic, 7 Inch
2220
Tin/Lead (Sn/Pb)
C320C105K1R5TA7301
C320C105K1R5TA7301 by KEMET: Ceramic fixed capacitor with 1uF capacitance, 100V URdc. X7R temp characteristics, -55 to 125 °C operating range. Ideal for through-hole mounting in various electronic applications.
5.84 mm
TR, 12 INCH
100 V
3.18 mm
KC355QD72E105KH01L
Murata Manufacturing's KC355QD72E105KH01L is a ceramic capacitor with 1uF capacitance, 250V rated DC voltage, and X7T temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance and operating temperature range of -55 to 125°C.
3.7 mm
6.1 mm
2421
X7T
22/-33%
5.3 mm
KC355TD7LQ105MV01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 630 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
4.8 mm
TR, EMBOSSED, 13 INCH
TAZE105K050LRSB0H24
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603X105J4RACAUTO7411
KEMET Corporation's C0603X105J4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. It is ideal for automotive applications due to AEC-Q200 standard compliance, -55 to 125 °C operating temperature range, and compact SMT package style.
.8 mm
C0603X105M4RACAUTO7411
KEMET C0603X105M4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance, it features surface mounting style and operates b/w -55°C to 125°C.
C0603C105M4RACAUTO7411
KEMET Corporation's C0603C105M4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for automotive applications due to AEC-Q200 standard compliance, compact SMT package, and wide operating temperature range from -55°C to 125°C.
SR305E105MARAP1
SR305E105MARAP1 by KYOCERA AVX is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. Featuring a negative tolerance of 20%, it operates b/w -56/+22% temperature coef from 10 to 85°C. Ideal for applications requiring high reliability and stability in through-hole mounting setups.
10 Cel
Z5U
-56/+22%
GRM155Z71A105KE01J
GRM155Z71A105KE01J by Murata is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. With X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
C4AQUBU4100A1WJ
C4AQUBU4100A1WJ by KEMET Corp is a 1uF film capacitor with 1300V URdc. It has ALUMINUM dielectric, -55 to 105 °C operating temp, and AEC-Q200 compliance. Ideal for automotive electronics due to its solid polymer construction and high voltage rating.
ALUMINUM (SOLID POLYMER)
31.5 mm
1300 V
AEC-Q200; EN; IEC; VDE
C0805C105M3RECAUTO7210
KEMET C0805C105M3RECAUTO7210 is a ceramic capacitor with 1uF capacitance, rated for 25V. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
C0805C105M3RECAUTO
C0805C105M3RECAUTO by KEMET is a ceramic capacitor with 1uF capacitance, rated for 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
TR, EMBOSSED PLASTIC, 7 INCH
B32036A4105M000
TDK
B32036A4105M000 by TDK is a film capacitor with 1uF capacitance and rated DC voltage of 1000V. It has a negative tolerance of 20% and positive tolerance of 20%. This fixed capacitor, made of polypropylene, is commonly used in automotive applications due to its AEC-Q200 reference standard compliance.
SAFETY CLASS Y2
39.5 mm
42 mm
-40 Cel
350 V
ECQUAAF105T1
Panasonic
ECQUAAF105T1 by Panasonic is a film capacitor with a capacitance of 1 uF and a rated AC voltage of 275 V. It is commonly used in automotive applications due to its AEC-Q200 certification and wide operating temperature range (-40°C to 110°C).
CLASS X2
19 mm
275 V
AEC-Q200, CSA, DEMKO, UL, VDE
12 mm
ECWFG2J105Q1
Panasonic ECWFG2J105Q1 is a 1uF film capacitor with 630V URdc. It has -40 to 110 °C operating temp range, suitable for AEC-Q200 automotive applications. With POLYPROPYLENE dielectric and radial package style, it's ideal for through-hole mounting in various electronic circuits.
27 mm
10.5 mm
TCJB105M050R0300E
KYOCERA AVX TCJB105M050R0300E is a TANTALUM CAPACITOR with 1uF capacitance, 50V URdc, and 300mohm ESR. Ideal for applications requiring low Tan Delta (0.06), low leakage current (0.005mA), and high ripple current handling (300mA). Suitable for SMT mounting in various electronic devices.
TANTALUM (SOLID POLYMER)
300
1.9 mm
0.005
3.5 mm
TR, PLASTIC, 7 INCH
1210
2.8 mm
F340X151048MKP2T0
Vishay Intertechnology F340X151048MKP2T0 is a 1uF film capacitor with rated AC voltage of 480V and DC voltage of 1000V. It has a temperature range from -40°C to 105°C, making it suitable for various applications in industries like automotive, electronics, and power distribution. The capacitor features polypropylene dielectric material and comes in radial package style for through-hole mounting.
SAFETY CLASS X1
31 mm
480 V
AEC-Q200, CSA, CQC, CUL, EN, IEC60384-14, UL
F340Y251030MPP2T0
The Vishay Intertechnology F340Y251030MPP2T0 is a film capacitor with a capacitance of 1 uF and a rated DC voltage of 1000 V. It is made with polypropylene dielectric material and has a max operating temperature of 105°C. This capacitor is commonly used in applications that require high voltage and temperature resistance, such as automotive electronics or power supplies.
32.5 mm
305 V
MKP383510063JKP2T0
Vishay Intertechnology's MKP383510063JKP2T0 is a 1uF film capacitor with 630V DC voltage rating. It has a positive/negative tolerance of 5% and operates b/w -55°C to 105°C. Ideal for applications requiring high AC voltage handling, such as power supplies and industrial electronics.
28 mm
UFG2A010MDM1TD
Nichicon UFG2A010MDM1TD is a 1uF, 100V aluminum electrolytic capacitor with 15mA ripple current. It has -40 to 85°C operating temperature range and radial package style. Ideal for applications requiring high capacitance and voltage stability in compact designs.
Tape
15
2.5 mm
R474W410050A1KV057
KEMET Corporation's R474W410050A1KV057 is a 1uF film capacitor with rated AC voltage of 440V and DC voltage of 1000V. It features polypropylene dielectric, -40 to 110°C operating temperature range, and through-hole mounting. Commonly used in automotive (AEC-Q200), electronics (ENEC), and industrial applications due to its high reliability and UL certification.
CLASS X1, STANDARD: IEC60384-14
28.5 mm
440 V
AEC-Q200; ENEC; CUL; UL
C4AQQBU4100P1WJ
C4AQQBU4100P1WJ by KEMET is a 1uF film capacitor with 1100V URdc. It has a -55 to 125°C operating temperature range and ±5% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in a rectangular package with wire terminals for through-hole mounting.
1100 V
C4AQQLU4100P11J
C4AQQLU4100P11J by KEMET Corp is a POLYPROPYLENE film capacitor with 1uF capacitance and 1100V URdc. It has a rectangular package, wire terminals, and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 compliance and high voltage tolerance.
MAASU32NSB7105KTNA01
Taiyo Yuden's MAASU32NSB7105KTNA01 is a ceramic capacitor with 1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 3.2x2.5x1.9mm.
MCASE168SB7105MTNA01
MCASE168SB7105MTNA01 by Taiyo Yuden is a ceramic capacitor with 1uF capacitance, rated for 16V. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for automotive applications meeting AEC-Q200 standard.
© 2023 All rights reserved
